1、BRITISH STANDARD BS EN 1748-1-2:2004 Glass in building Special basic products Borosilicate glasses Part 1-2: Evaluation of conformity/Product standard The European Standard EN 1748-1-2:2004 has the status of a British Standard ICS 81.040.20 BS EN 1748-1-2:2004 This British Standard was published und
2、er the authority of the Standards Policy and Strategy Committee on 14 October 2004 BSI 14 October 2004 ISBN 0 580 44596 8 National foreword This British Standard is the official English language version of EN 1748-1-2:2004. The UK participation in its preparation was entrusted by Technical Committee
3、 B/520, Glass and glazing in building, to Subcommittee, B/520/1, Glass and glazing in building Basic and transformed glass products, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Sta
4、ndards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. Th
5、is publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible int
6、ernational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN
7、 title page, pages 2 to 32, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN174812 October2004 ICS81.040.
8、20 Englishversion GlassinbuildingSpecialbasicproductsBorosilicateglasses Part12:Evaluationofconformity/Productstandard VerredanslaconstructionProduitsdebasespciaux VerresborosilicatsPartie12:Evaluationdela conformit/Normedeproduit GlasimBauwesenSpezielleBasiserzeugnisse BorosilicatglserTeil12: Konfo
9、rmittsbewertung/Produktnorm ThisEuropeanStandardwasapprovedbyCENon27May2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings
10、uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesa
11、mestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,Switzerlan
12、dandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN174812:2004:E EN 1748-1-2:2004 (E) 2 Co
13、ntents Page Foreword. 4 1 Scope 5 2 Normative references . 5 3 Terms and definitions. 6 4 Requirements 6 4.1 Conformity with the definition of borosilicate glass products 6 4.2 Determination of the characteristics performances. 6 4.2.1 Characteristics of borosilicate glasses 6 4.2.2 Characteristics
14、of borosilicate glass products7 4.3 Durability 9 4.4 Characteristics other than those listed in 4.2 9 4.5 Dangerous substances. 9 5 Evaluation of conformity 10 5.1 General. 10 5.2 Initial type testing of the product (see 5.1, 2). 10 5.2.1 General. 10 5.2.2 Initial type testing if the product belongs
15、 to the group borosilicate glass, clear or tinted. 11 5.2.3 Initial type testing of characteristics performances. 12 5.3 Factory production control and inspection of samples in accordance with a prescribed test plan (see 5.1, 1a and b) 12 5.4 Initial inspection of factory and of factory production c
16、ontrol (see 5.1, 1c). 12 5.5 Continuous surveillance and assessment of the factory production control (see 5.1, 1c) 13 6 Marking and/or labelling. 14 6.1 General. 14 6.2 Product marking 14 6.3 Product characteristics 14 6.4 “Characteristics/performance identification paper” . 14 Annex A (normative)
17、Factory production control 15 A.1 Factory Production Control Requirements 15 A.1.1 General. 15 A.1.2 Organisation 15 A.1.3 Control system 15 A.2 Marking 16 A.3 Inspection and testing tables of borosilicate glass products production 17 A.3.1 Information on Tables A.1 to A.3. 17 A.3.2 Use of proxy tes
18、ting 17 AnnexB (informative) Provisions for voluntary involvement of third party(ies). 21 B.1 General. 21 B.2 Voluntary tasks for third parties 21 B.3 Marking and labelling . 21 EN 1748-1-2:2004 (E) 3 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Constructi
19、on Products Directive. 22 ZA.1 Scope and relevant characteristics. 22 ZA.2 Procedure(s) for the attestation of conformity of borosilicate glass products 24 ZA.2.1 System(s) of attestation of conformity . 24 ZA.2.2 EC Certificate and Declaration of conformity 27 ZA.3 CE marking and labelling . 29 Bib
20、liography . 32 EN 1748-1-2:2004 (E) 4 Foreword This document (EN 1748-1-2:2004) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an ident
21、ical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by July 2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirem
22、ents of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Aust
23、ria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. No existing document is supersed
24、ed. This part of the document does not stand-alone, it is a part of one document: EN 1748 -1-1: Glass in building Special basic products Borosilicate glasses Part 1-1: Definition and general physical and mechanical properties EN 1748 -1-2: Glass in building Special basic products Borosilicate glasse
25、s Part 1-2: Evaluation of conformity/Product standard This document contains other aspects of importance of trade. EN 1748-1-2:2004 (E) 5 1 Scope This document covers the evaluation of conformity and the factory production control of borosilicate glass products for use in buildings. Note: For glass
26、products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited
27、applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building - Security glazing - Testing and classification of resistance against manual attack EN 410, Glass in building - Determination of luminous and solar characteris
28、tics of glazing EN 673, Glass in building Determination of thermal transmittance (U value) Calculation method EN 1063, Glass in building - Security glazing - Testing and classification of resistance against bullet attack ENV 1187, Test methods for external fire exposure to roofs EN 17481-1, Glass in
29、 building - Special basic products -Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties EN 12600, Glass in building - Pendulum test - Impact test method and classification for flat glass EN 12758, Glass in building - Glazing and airborne sound insulation Produc
30、t descriptions and determination of properties prEN 13474, Glass in building - Design of glass panes EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13501-2, Fire classification of construction products a
31、nd building elements Part 2: Classification using data from resistance to fire tests, excluding ventilation services prEN 13501-5, Fire classification of construction products and building elements - Part 5: Classification using data from fire exposure roof tests EN 13541, Glass in building - Securi
32、ty glazing - Testing and classification of resistance against explosion pressure EN 1748-1-2:2004 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1748-1-1 and the following apply. 3.1 initial type testing determination of the performance of a pr
33、oduct (characteristic, durability), on the basis of either actual tests or other procedures (such as conventional, standardised, tabulated or general accepted values, standardised or recognised calculation methods, test reports when made available,), in accordance with this document that demonstrate
34、s compliance with this document. 3.2 test report document that covers the results of tests undertaken on a representative sample of the product from production or on a prototype design of the product. 3.3 product description document that details the relevant parameters, e.g. process conditions, str
35、ucture, etc., for defining a product that complies with the standard. It includes specific reference(s) to characteristics that are modified by the production process. 3.4 significant change variation in performance beyond the permitted tolerance for the characteristic. 4 Requirements 4.1 Conformity
36、 with the definition of borosilicate glass products Products shall conform to the definition and fulfil the requirements of borosilicate glass products as defined in EN 1748 1-1. 4.2 Determination of the characteristics performances 4.2.1 Characteristics of borosilicate glasses Borosilicate glass pr
37、oducts are made in accordance with EN 1748-1-1. The characteristics listed in Table 1, concern generally accepted values, calculated values or measured values. EN 1748-1-2:2004 (E) 7 Table 1: Necessary information on characteristics of borosilicate glasses Characteristic Symbol Unit Generally accept
38、ed values: - density - hardness - Youngs modulus - Poissons ratio - Characteristic bending strength - Resistance against sudden temperature changes and temperature differentials - Specific heat capacity - Coefficient of linear expansion - Thermal conductivity (for U-value) - Mean refractive index to
39、 visible radiation - Emissivity HK 0,1/20 E f g,k c n kg/m Gpa Pa Dimensionless Pa K J/(kg.K) K -1W/(m.K) Dimensionless Dimensionless Measured values: - light transmittance - solar direct transmittance v eDimensionless Dimensionless Calculated values: - total solar energy transmittance G Dimensionle
40、ss 4.2.2 Characteristics of borosilicate glass products If the basic borosilicate glass manufacturer wishes to claim that any performance characteristic is independent of the production equipment used then the factory production control system shall be in accordance with this document including his
41、specific process control conditions. 4.2.2.1 Safety in the case of fire - Resistance to fire Fire resistance shall be determined and classified in accordance with EN 13501-2. Note: EN 357 may be used as a classification reference specific to fire resistant glazed elements. 4.2.2.2 Safety in the case
42、 of fire - Reaction to fire Reaction to fire shall be determined and classified in accordance with EN 13501-1. Borosilicate glass products are products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1* according to Commission Decision 96/603/EC,
43、as amended 2000/605/EC). EN 1748-1-2:2004 (E) 8 4.2.2.3 Safety in the case of fire - External fire behaviour Where the manufacturer wishes to declare external fire performance (e.g. when subject to regulatory requirements), the product shall be tested and classified in accordance with prEN 13501-5.
44、Note: Compliance with this requirement is not possible until a version of prEN 13501-5 later than 2002 becomes available. 4.2.2.4 Safety in use - Bullet resistance: shatter properties and resistance to attack Bullet resistance shall be determined and classified in accordance with EN 1063. 4.2.2.5 Sa
45、fety in use - Explosion resistance: impact behaviour and resistance to impact Explosion resistance shall be determined and classified in accordance with EN 13541. 4.2.2.6 Safety in use - Burglar resistance: shatter properties and resistance to attack Burglar resistance shall be determined and classi
46、fied in accordance with EN 356. 4.2.2.7 Safety in use - Pendulum body impact resistance: shatter properties (safe breakability) and resistance to impact Pendulum body impact resistance shall be determined and classified in accordance with EN 12600. 4.2.2.8 Safety in use - Mechanical resistance: Resi
47、stance against sudden temperature changes and temperature differentials The resistance against sudden temperature changes and temperature differentials is a generally accepted value that is given in EN 1748-1-1 and shall be ensured by compliance with this document. 4.2.2.9 Safety in use - Mechanical
48、 resistance: Resistance against wind, snow, permanent load and/or imposed loads of the glass unit The mechanical resistance of borosilicate glass is a characteristic value that is given in EN 1748-1-1 and shall be ensured by compliance with this document. As long as on the concerned construction or building site no part of prEN 13474 is applicable then the current method of determining mechanical resistance in the country of destination shall be applied. The manufactured or supplied thickness of borosilica
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1