BS EN 2402-2014 Aerospace series Heat resisting nickel base alloy NiCr20Co3Fe3 Annealed Wire D 10 mm《航空航天系列 耐热镍基合金NiCr20Co3Fe3 退火 焊丝 直径小于等于10毫米》.pdf

1、BSI Standards PublicationBS EN 2402:2014Aerospace series Heat r e s i s t i n g n i c k e l b a s e a l l o y NiCr20Co3Fe3 Annealed Wire D 10 mmBS EN 2402:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 2402:2014.The UK participation in its preparation was

2、entrusted to TechnicalCommittee ACE/61/-/48, Heat Resisting Alloys for AerospacePurposes.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for

3、its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 84526 0ICS 49.025.15Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and

4、Strategy Committee on 31 May 2014.Amendments issued since publicationDate Text affectedBS EN 2402:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2402 April 2014 ICS 49.025.15 English Version Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D 10 mm Srie a

5、rospatiale - Alliage rsistant base de nickel NiCr20Co3Fe3 - Requit - Fil - D 10 mm Luft- und Raumfahrt - Hochwarmfeste Nickelbasislegierung NiCr20Co3Fe3 - Geglht - Draht - D 10 mm This European Standard was approved by CEN on 27 December 2013. CEN members are bound to comply with the CEN/CENELEC Int

6、ernal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to an

7、y CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official v

8、ersions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa

9、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploi

10、tation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2402:2014 EBS EN 2402:2014EN 2402:2014 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 BS EN 2402:2014EN 2402:2014 (E) 3 Foreword This document (EN 2402:2014) has been prepa

11、red by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countri

12、es of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at the latest by October 2014. Atte

13、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of

14、 the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth

15、erlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 2402:2014EN 2402:2014 (E) 4 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this

16、 series is described in EN 4258. This standard has been prepared in accordance with EN 4500-003. BS EN 2402:2014EN 2402:2014 (E) 5 1 Scope This European Standard specifies the requirements relating to: Heat resisting nickel base alloy NiCr20Co3Fe3 Annealed Wire D 10 mm for aerospace applications. NO

17、TE Other designation: Only the chemical composition of this standard must be considered. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. F

18、or undated references, the latest edition of the referenced document (including any amendments) applies. EN 2043, Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings). EN 3238, Aerospace series - Metallic materials - T

19、est method - Shear test for wires and rivets EN 4258, Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use EN 4500-003, Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - P

20、art 003: Specific rules for heat resisting alloys EN 4700-004, Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire BS EN 2402:2014EN 2402:2014 (E) 6 Material designation Heat resisting nickel base alloy NiCr20Co3Fe3 2 Chemical composition

21、% Element C Si Mn S Co Cr Cu Fe Pb Ti Ni min. 0,08 18,0 0,20 Base max. 0,15 1,0 1,0 0,020 5,0 21,0 0,5 5,0 0,005 0,60 3 Method of melting Air or vacuum melted or air melted and vacuum refined or consumable electrode remelted 4.1 Form Wire 4.2 Method of production Cold drawn 4.3 Limit dimension(s) mm

22、 D 10 5 Technical specification EN 4700-004 6.1 Delivery condition Annealed and descaled or bright annealed Heat treatment 1 000 C 1 050 C/ AC or WQ or cool in protective atmosphere 6.2 Delivery condition code U 7 Use condition Delivery condition Heat treatment Characteristics 8.1 Test sample(s) See

23、 EN 4700-004. 8.2 Test piece(s) See EN 4700-004. 8.3 Heat treatment Use condition 9 Dimensions concerned mm D 10 10 Thickness of cladding on each face % 11 Direction of test piece L 12 T Temperature C Ambient 13 Proof stress Rp0,2MPa 14 Strength RmMPa 690 15 Elongation A % 25 16 Reduction of area Z

24、% 17 Hardness 18 Shear strength RcMPa 440 a19 Bending k 20 Impact strength 21 C Temperature C 22 Time h 23 Stress aMPa 24 Elongation a % 25 Rupture stress RMPa 26 Elongation at rupture A % 27 Notes (see line 98) a BS EN 2402:2014EN 2402:2014 (E) 7 36 Reverse torsion test See EN 4700-004. 7 D 10 mm;

25、Seven turns in each direction 43 Wrapping test See EN 4700-004. 44 External defects See EN 4700-004. 51 Macrostructure See EN 4700-004. 95 Marking inspection See EN 4700-004. 96 Dimensional inspection See EN 4700-004 98 Notes aDetermined on one sample per batch in accordance with EN 3238. 99 Typical

26、 use BS EN 2402:2014EN 2402:2014 (E) 8 100 Product qualification See EN 2043. Qualification programme to be agreed between manufacturer and purchaser. This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, infor

27、mation and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, governme

28、nt, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across a

29、ll sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying st

30、andardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard

31、copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and

32、adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format

33、, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, pl

34、ease visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .Revi

35、sionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Cent

36、re.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licens

37、ed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior wr

38、itten permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW