BS EN 2436-001-2006 Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 001 Basic requirements《航空航天系列 油漆和清漆 不含铬酸盐的耐腐.pdf

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58component cold curing primer Part 001: Basic requirementsThe European Standard EN 2436-001:2006 has

2、 the status of a British StandardICS 49.040Paints and varnishes Corrosion resistant chromate-free two BRITISH STANDARD AEROSPACE SERIESBS EN2436-001:2006BS EN 2436-001:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2006 BSI 2006I

3、SBN 0 580 48875 6Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electro

4、nic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis d

5、ocument comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Comments present to the responsible international/

6、European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this subcommittee can be obtained on request to its secretary.

7、National forewordThis British Standard is the official English language version of EN 2436-001:2006. The UK participation in its preparation was entrusted by Technical Committee ACE/65, Non-metallic materials for aerospace purposes (excluding textiles), to Subcommittee ACE/65/-/3, Paints, which has

8、the responsibility to: aid enquirers to understand the text;EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 2436-001June 2006ICS 49.040English VersionAerospace series - Paints and varnishes - Corrosion resistantchromate-free two component cold curing primer - Part 001:Basic requirementsSrie arospa

9、tiale - Peintures et vernis - Peinture primaireanti-corrosion sans chromate deux composantspolymrisant temprature ambiante - Partie 001 :Exigences gnralesLuft- und Raumfahrt - Anstrichstoffe -Korrosionsbestndiger Zweikomponenten-Grundanstrich,kalthrtend chromatfrei - Teil 001: GrundlegendeAnforderun

10、genThis European Standard was approved by CEN on 9 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer

11、ences concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into

12、its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe

13、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights

14、 of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2436-001:2006: E2 Contents Page Foreword3 0 Introduction4 1 Scope 4 2 Normative references 4 3 Definitions 5 4 Classification5 5 Batch release and qualification testing.5 EN 2436-001:20063 Foreword T

15、his European Standard (EN 2436-001:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Asso

16、ciations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national standar

17、ds shall be withdrawn at the latest by December 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Int

18、ernal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Ne

19、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and the United Kingdom. EN 2436-001:20064 0 Introduction This standard is part of a series of EN non-metallic materials standards for aerospace applications. The general organisation of this series is descr

20、ibed in EN 4385. This standard is a level 3 document as defined in EN 4385. Definition of subcase numbering in Tables 2 to 5 is given in TR 7000-9. 1 Scope This standard specifies the basic requirements for a two component, cold curing, chromate-free epoxy or polyurethane, corrosion resistant primer

21、 which can be used with or without a finish for aerospace applications. The properties specified in this standard are obtained on defined aluminium alloy test pieces prepared in ac-cordance with EN 3837, process A and ISO 3270. The ability of the material to be used for a specific applica-tion (e.g.

22、 alternative substrate, alternative primer, specific drying conditions etc.) shall be determined by sup-plementary tests to confirm that the requirements of this standard are met. 2 Normative references The following referenced documents are indispensable for the application of this document. For da

23、ted refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2334, Aerospace series Chromic-sulphuric acid pickle of aluminium and aluminium alloys EN 2379, Aerospace series Fluids for assessment of non-

24、metallic materials1)EN 3837, Aerospace series Paints and varnishes Nature and method for surface preparation of test pieces in aluminium alloys1)EN 3840, Aerospace series Paints and varnishes Technical specification1)EN 4385, Aerospace series Non-metallic materials General organisation of standardis

25、ation Links be-tween types of standards1)ISO 1513, Paints and varnishes Examination and preparation of samples for testing ISO 3270, Paints and varnishes and their raw materials Temperature and humidities for conditioning and testing ISO 3696, Water for analytical laboratory use Specification and te

26、st methods TR 7000-9, Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 9: Paints and varnishes2) 1) Published as ASD Prestandard at the date of publication of this standard. 2) Published as ASD Technical Report at the date of publication of t

27、he standard. EN 2436-001:20065 3 Definitions Not applicable: 4 Classification The primer is classified according to the nature of the most typical chemical reaction that occurs between the two components: Type A: epoxy (reaction between an epoxy resin and an activator with amino functional groups).

28、Type B: polyurethane (reaction between an hydroxyl functional resin and a polyisocyanate activator). 5 Batch release and qualification testing 5.1 Batch release testing For batch acceptance the tests marked with the symbol * in Tables 2 to 5 shall be performed. 5.2 Qualification tests For product qu

29、alification, all tests mentioned in this standard, in the Tables 1 to 5, shall be performed. Table 1 General requirements 1.001 Material description Two component cold curing chromate-free primer 1.002 Formulation Base a base containing essentially chromate corrosion in-hibitor associated, or not, w

30、ith pigments and fillers dispersed in a mixture of resins and solvents. Activator an activator solution Thinner if required 1.003 Form and method of produc-tion These components shall be mixed in simple whole number proportions, by volume or by weight, in accordance with the manufacturers instructio

31、ns. 1.004 Technical specification EN 3840 1.009 Application and use Dry film thickness of (20 5) m. 1.010 Storage See EN 3840 1.011 Shelf life See EN 3840 1.013 Processing conditions ISO 3270 for 7 days before testing unless otherwise specified.1.093 Quality assurance See EN 3840 1.094 Designation C

32、hromate-free primer. EN 2436-001 Type A or Type B 1.095 Packaging See EN 3840 1.096 Identification marking See EN 3840 1.097 Flash point See EN 3840 1.098 Health and safety See EN 3840 EN 2436-001:20066 Table 2 Physical and chemical characteristics 1 ISO 1513 Condition 6 As received in original cont

33、ainer. 2.014 * 7 Shall be free from extraneous matter and show no skinning, gelling, hard settlement or other defect which will prevent satisfactory application to produce a defect free film. 1 None 3 EN 3837 A22024-T3 Clad 4 EN 3837 Process A EN 2334 Pickle Application properties and finish 5 Prime

34、r to this standard. 2.011 * 7 Paint film shall show an opaque even finish, free from runs, sags, wrinkling, pin holing or other defect. EN 3840 1 Test 5 6 Base + activator + thinner 2.034 Sedimentation rating 7 ml V 30 after 4 h EN 3840 1 Test 20 followed by Test 8aor Test 9aPot life 6 Base + activa

35、tor + thinner 2.012 *7 s or Pa s 2 initial value after 4 h EN 3840 1 Test 8aor Test 9aViscosity 6 Base + activator + thinner 2.029 *7 s or Pa s 10 %b cEN 3840 1 Test 10 Fineness of grind 6 Base + activator 2.035 *7 m 30 EN 3840 1 Test 1 Base Activator 2.027 Non volatile matter 7 % 2b c 2b cEN 3840 1

36、 Test 49 6 Base + activator + thinner 2.027 Volatile organic compound (VOC) content 7 g/l reference valueb cEN 3840 1 Test 3 Density 6 Base 2.057 * 7 g/cm3 2b c eEN 2436-001:20067 Table 2 Physical and chemical characteristics (concluded) EN 3840 1 Test 4 6 Activator + thinner Density hydrometer Acti

37、vator Thinner 2.057 *7 g/cm3 1b c 1b cEN 3840 1 Test 7 Base Activator Thinner 2.036 Flash point 7 C reference valuec reference valuec reference valuecEN 3840 1 Test 21 3 EN 3837 A22024-T3 Clad 4 EN 3837 Process A EN 2334 Pickle 5 Primer to this standard. 6 ISO 3270 2.041 Surface dry time 7 h 1 dEN 3

38、840 1 Test 22 3 EN 3837 A22024-T3 Clad 4 EN 3837 Process A EN 2334 Pickle 5 Primer to this standard. 6 ISO 3270 2.041 Drying time Print free 7 h 4 using a load of 1 000 gdEN 3840 1 Test 23 3 EN 3837 A22024-T3 Clad 4 EN 3837 Process A EN 2334 Pickle 5 Primer to this standard. Through dry time 6 ISO 3

39、270 2.041 *7 h 16 2.999 Notes *See 5.1aTest 8 shall be used for non-thixotropic paints and test 9 for thixotropic paints. bThe deviation is that compared to the reference value. cThe reference value is that established during qualification.dUnless otherwise specified. eTest could also be used for ac

40、tivator and thinner if required. EN 2436-001:20068 Table 3 Physico Chemical characteristics EN 3840 1 Test 30 3 EN 3837 A22024-T3 Clad 4 EN 3837 Process A EN 2334 Pickle 5 Primer to this standard 3.084 or 3.053 Colour 6 ISO 3270 *7 E If specified shall match the colour. EN 3840 1 Test 27 3 EN 3837 A

41、22024-T3 Clad 4 EN 3837 Process A EN 2334 Pickle 5 Primer to this standard. Gloss 60 6 ISO 3270 3.088 or 3.083 *7 Gloss units 20 * See 5.1 Table 4 Mechanical characteristics EN 3840 1 Test 24 3 EN 3837 A22024-T3 Clad 4 EN 3837 Process D Degreased 5 Primer to this standard. Adhesion 6 ISO 3270 4.082

42、*7 Classification 0 EN 3840 1 Test 29 3 EN 3837 A22024-T3 Clad 4 EN 3837 Process A EN 2334 Pickle 5 Primer to this standard. Scratch resistance 6 ISO 3270 4.076 *7 1 800 g metal not exposed. * See 5.1 EN 2436-001:20069 Table 5 Environmental characteristics EN 3840 1 Test 35 3 EN 3837 A22024-T3 Clad

43、4 EN 3837 Process A EN 2334 Pickle 5 Primer to this standard, panel scribed to substrate immediately before testing. 6 Tri-n-butyl phosphate to EN 2379 G2 for 24 h at (70 2) Ca5.101 Resistance to fluidsa7 No blistering, softening, lifting or other film defect Test 29 1 200 g metal not exposed EN 384

44、0 1 Test 34 3 EN 3837 A22024-T3 Clad 4 EN 3837 Process A EN 2334 Pickle 5 Primer to this standard, panel scribed to substrate immediately before testing. 6 Water to ISO 3696 Grade 2 for 336 h 5.100 Water behaviour 7 No blistering, softening, lifting or other film defect Test 24 Classification 1 Test

45、 29 1 200 g metal not exposed EN 3840 1 Test 42 3 EN 3837 A12024-T3 Unclad 4 EN 3837 Process A EN 2334 Pickle 5 Primer to this standard, panel scribed to substrate immediately before testing. 6 1 000 h 5.107 Corrosion Test resistance to neutral salt spray 7 No blistering, detachment or pitting. No c

46、orrosion more than 2 mm from the scribe 5.999 Notes aAdditional fluids shall be subject of agreement between manufacturer and the user. EN 2436-001:2006BS EN BSI389 Chiswick High RoadLondonW4 4AL2436-001:2006BSI British Standards InstitutionBSI is the independent national body responsible for prepar

47、ing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.I

48、t is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside fr

49、ont cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ord