BS EN 2591-320-1998 Elements of electrical and optical connection - Test methods - Simulated solar radiation at ground level《光电连接元件 试验方法 地表面模拟太阳辐射》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 2591-320:1998 Elements of electrical and optical connection Test methods Part 320: Simulated solar radiation at ground level The European Standard EN2591-320:1997 has the status of a British Standard ICS 49.060BSEN 2591-320:1998 This British Standard, having b

2、een prepared under the directionof the Engineering SectorBoard, was published underthe authority of the Standards Board and comes intoeffect on 15January1998 BSI 04-1999 ISBN 0 580 29476 5 National foreword This British Standard is the English language version of EN2591-320:1997. The UK participatio

3、n in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic, electrical and fibre optic technology, to Subcommittee ACE/6/3, Aerospace connectors, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee

4、 any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-refere

5、nces Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this

6、 document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users

7、 of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theENtitle page, pages2to4 and a back cove

8、r. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN 2591-320:1998 BSI 04-1999 i Contents Page National foreword Inside

9、front cover Foreword 2 Text of EN 2591-320 3ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2591-320 October 1997 ICS 49.060 Descriptors: Aircraft industry, aircraft equipment, connecting equipment, test English version Aerospace series Elements of electrical and optical connection Test

10、 methods Part 320: Simulated solar radiation at ground level Srie arospatiale Organes de connexion lectrique et optique Mthodes dessais Partie 320: Rayonnement solaire artificiel au niveau du sol Luft- und Raumfahrt Elektrische und optische Verbindungselemente Prfverfahren Teil320: Knstliche Sonnenb

11、estrahlung am Boden This European Standard was approved by CEN on 22June1997. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl

12、iographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility o

13、f a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, No

14、rway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved w

15、orldwide for CEN national Members. Ref. No. EN 2591-320:1997 EEN 2591-320:1997 BSI 04-1999 2 Foreword This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA). After inquiries and votes carried out in accordance with the rules of this Association, this

16、Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication, of an identical text or by endorsement, at the

17、 latest by April1998, and conflicting national standards shall be withdrawn at the latest by April1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, D

18、enmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 2 1 Scope 3 2 Normative reference 3 3 Preparation of specimens 3 4 Apparatus 3 5 Method 4 Table 1 3EN 2591-320:1997

19、BSI 04-1999 3 1 Scope This standard specifies a method of determining the effects of simulated solar radiation on elements of connection at ground level. It shall be used together with EN2591. 2 Normative references This European Standard incorporates by dated or undated reference provisions from ot

20、her publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment o

21、r revision. For undated references the latest edition of the publication referred to applies. EN 2591, Aerospace series Elements of electrical and optical connection Test methods General. EN 2591-101, Aerospace series Elements of electrical and optical connection Test methods Part 101: Visual examin

22、ation. EN 2591-206, Aerospace series Elements of electrical and optical connection Test methods Part 206: Measurement of insulation resistance. EN 2591-207, Aerospace series Elements of electrical and optical connection Test methods Part 207: Voltage proof test. 3 Preparation of specimens 3.1 Specim

23、ens shall be prepared according to the technical specification. The test shall be carried out on unmated specimens. 3.2 Unless specified in the technical specification, the following details shall be stated: mounting method, type of cable and definition of specimen wiring; orientation of specimens w

24、ith respect to the radiation source; air flow rate; humidity rate; initial measurements and requirements (ifapplicable); method according to EN2591-206 and insulation resistance value; method according to EN2591-207 and voltage value; final measurement. 4 Apparatus Suitable precautions shall be take

25、n for personnel protection throughout the test. 4.1 Test chamber It shall be capable of producing an irradiance of(1,12 0,10) kW/m 2 . The surface of the radiating source shall be a minimum of 125% of the specimens projected surface to ensure irradiation of the entire exposed surface of the specimen

26、. The irradiance value shall include any radiation reflected from the test chamber and received by the specimens. It shall not include infrared radiation with a wavelength greater than 3 4m emitted by the test chamber. The test chamber shall be capable of maintaining the specified conditions of temp

27、erature, air flow and humidity. The temperature within the test chamber shall be measured (with adequate shielding from radiated heat) at a point or points in a horizontal plane 0mm to 50mm below the prescribed irradiation measurement plane. This measurement shall be carried out at half the distance

28、 between the specimen and the chamber walls or at 1m from the specimen, when this distance is smaller. 4.2 Irradiance The irradiance shall have the spectral energy distribution shown in the Table 1. Table 1 Spectral region Ultraviolet B Ultraviolet A Visible Infrared Bandwidth 0,28 4m to 0,32 4m 0,3

29、2 4m to 0,40 4m 0,40 4mto 0,52 4m 0,52 4mto 0,64 4m 0,64 4m to 0,78 4m 0,78 4m to 3,00 4m Irradiance 5 W/m 2 35% 63 W/m 2 25% 200 W/m 2 10% 186 W/m 2 10% 174 W/m 2 10% 492 W/m 2 20%EN 2591-320:1997 4 BSI 04-1999 The spectral distribution shall be checked before and after each test. 4.3 Test setup Th

30、e specimens shall be installed in a test setup of known thermal conductivity. They shall be spaced from other specimens to avoid shielding effects and shall be orientated as specified. 5 Method 5.1 Initial measurements and requirements (ifapplicable) They shall be carried out as specified. 5.2 Proce

31、dure The specimens shall be exposed for 16d to the irradiation. The temperature within the test chamber shall be maintained at (55 2) C. On completion of exposure, the specimens shall be mated and submitted to tests EN2591-206 and EN2591-207, the temperature being maintained at(55 2) C. 5.3 Final me

32、asurement At the end of the test, the specimens shall be tested to EN2591-101.5 blankBS EN 2591-320:1998 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Eu

33、rope and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our produ

34、cts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members a

35、n individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In respon

36、se to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through i

37、ts Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards

38、developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the public

39、ations of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permis

40、sion from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.