BS EN 2604-2005 Aerospace series - 8 30 interface for adaptors threaded with lockring - Geometric configuration《航空航天系列 8 30带锁环的螺纹适配器接口 几何构型》.pdf

1、BRITISH STANDARD AEROSPACE SERIESBS EN2604:20058 30 interface for adaptors, threaded, with lockring Geometric configurationThe European Standard EN 2604:2005 has the status of a British StandardICS 49.030.99g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g

2、49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Fri Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSIBS EN 2604:2005This British Standard was published under the authority of the Standards Policy and Strategy

3、Committee on 30 June 2006 BSI 2006ISBN 0 580 47947 1National forewordThis British Standard is the official English language version of EN 2604:2005.The UK participation in its preparation was entrusted to Technical Committee ACE/69, Aerospace hydraulic systems, fluids and components, which has the r

4、esponsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “

5、International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with

6、a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international

7、and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued sin

8、ce publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Fri Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2604 December 2005 ICS 49.030.99 English Version Aerospace series 8 30 interface for adaptors, threaded, with lockring - Geome

9、tric configuration Srie arospatiale - Raccords droits mtriques avec bague de scurit - Interface des raccords 8 30 - DimensionsLuft- und Raumfahrt 8 30-Anschlusszapfen fr gerade Einschraubverschraubungen mit Sicherungsring - Konstruktionsblatt This European Standard was approved by CEN on 28 October

10、2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtaine

11、d on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secreta

12、riat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu

13、gal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserve

14、d worldwide for CEN national Members. Ref. No. EN 2604:2005: ELicensed Copy: Wang Bin, na, Fri Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSI2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Required characteristics 5 4 Designation .7 EN 2604:2005Licensed Copy: Wang Bin, na, Fr

15、i Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSI3 Foreword This European Standard (EN 2604:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this

16、 Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at th

17、e latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all s

18、uch patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irelan

19、d, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2604:2005Licensed Copy: Wang Bin, na, Fri Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSI4 1 Scope This standard specifies the dimens

20、ional characteristics of the 830 interface for adaptors, threaded, with lock-ring, assembly with elastomer O-ring for aerospace applications. This standard applies to all adaptors, threaded, with lockring, assembled with EN 2607 to EN 2608 and used in fluid systems with a nominal pressure up to 28 0

21、00 kPa for which the principle of a metric-size “dynamic beam seal“ coupling with a 830 conical sealing surface has been selected. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies.

22、For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 5855-1, Aerospace MJ threads Part 1: General requirements ISO 5855-3, Aerospace MJ threads Part 3: Limit dimensions for fluid systems EN 2602, Aerospace series Ports for adaptors, threaded,

23、with lockring Geometric configuration EN 2603, Aerospace series Port ends for adaptors, threaded, with lockring Geometric configuration EN 2607, Aerospace series O-rings for adaptors, threaded, with lockring Survey EN 2645, Aerospace series Lockrings for adaptors, threaded, with lockring Dimensions

24、EN 2604:2005Licensed Copy: Wang Bin, na, Fri Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSI5 3 Required characteristics 3.1 Configuration Dimensions Dimensions in millimetres aThread B bPitch diameter cAccording to EN 2603 dLockring position after installation in port according to EN 2602. eR

25、0,25 max. or break sharp corner fWhen d2 is less than or equal to d7, port diameter d7shall be the same over the whole adaptor length and l8and d2values shall be disregarded. gThread A Figure 1 EN 2604:2005Licensed Copy: Wang Bin, na, Fri Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSITable 1Di

26、mensionsinmillimetresThreadAbThreadBbd2d4d5d11l2l4l8l9l10l13rNut end Portend CodeaPortdimension code4g6g 4h6hNominalToleranceNominalTolerance020,0Nominal min.10,020,0+ 0,20 min.0,25min.0,40 05077 MJ 101 MJ 6 1 4,208,60020,08,15 9,37 4,00 3,4011,007,10 15,58 4,25 0,60 06098 MJ 121,25MJ 8 1 5,0010,30

27、10,20 11,53 5,00 3,9013,008,60 17,95 4,95 0,70 08125 MJ 141,5MJ10 1 6,7012,00 11,90 13,87 6,15 4,4015,0010,40 19,72 5,50 0,80 10136 MJ 161,5MJ12 1,25 8,7014,00 13,90 15,37 6,15 4,4015,0010,40 20,58 5,80 0,80 12153 MJ 181,5MJ14 1,510,6016,00 15,90 17,12 6,15 4,4015,0010,40 20,52 5,60 0,80 14170 MJ 20

28、1,5MJ16 1,511,4520,0 0+18,00 17,50 18,77 6,15 4,4015,0010,40 21,04 6,05 0,80 16192 MJ 221,5MJ18 1,513,3020,00 19,70 20,93 6,15 4,4015,0010,40 20,84 5,85 0,80 18214 MJ 241,5MJ20 1,515,3022,00 21,90 23,85 6,15 4,4015,0010,40 21,31 5,55 0,80 20231 MJ 271,5MJ22 1,518,0025,00 23,65 24,92 6,15 4,4015,5010

29、,60 22,32 6,85 0,80 22253 MJ 301,5MJ24 1,520,8028,00 25,95 27,41 6,15 4,4015,5010,60 22,09 6,15 0,80 25295 MJ 331,5MJ27 1,522,4031,00 29,40 31,47 6,15 4,4015,5010,60 20,82 4,70 0,80 28320 MJ 361,5MJ30 1,525,6034,00 32,15 33,60 6,15 4,4015,5010,60 21,47 5,90 0,80 32350 MJ 391,5MJ33 1,528,3030,0 0+37,

30、00030,035,55 37,57 6,15 4,4015,5010,60 21,47 4,60 0,80 aCorresponds to the pipenominaloutside diameter. bAccording to ISO 5855-3except MJ 6 1.MJ61 accordingto ISO5855-1. EN 2604:20056 Licensed Copy: Wang Bin, na, Fri Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSI7 3.2 Surface roughness Accordi

31、ng to Figure 1, unless otherwise specified in the design documentation. 4 Designation EXAMPLE Identity block EN 2604 10 Number of this standard Code (see Table 1) EN 2604:2005Licensed Copy: Wang Bin, na, Fri Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSIBS EN2604:2005BSI389 Chiswick High RoadL

32、ondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revi

33、sion. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform th

34、e Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions

35、of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders

36、 for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library an

37、d its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to

38、 date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British

39、Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies.

40、 Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use,

41、 in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.Licensed Copy: Wang Bin, na, Fri Jul 28 03:25:07 BST 2006, Uncontrolled Copy, (c) BSI