BS EN 2684-2005 Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm a 140 mm《航空航天系列 铝合金AL-P7010-T7651 板材 6mma140mm》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 2684:2004 Aluminium alloy AL-P7010-T7651 Plate 6 mm au 140 mm The European Standard EN 2684:2004 has the status of a British Standard ICS 49.025.20 BS EN 2684:2004 This British Standard was published under the authority of the Standards Policy and Strategy Com

2、mittee on 13 January 2005 BSI 13 January 2005 ISBN 0 580 45272 7 National foreword This British Standard is the official English language version of EN 2684:2004. The UK participation in its preparation was entrusted to Technical Committee ACE/61/-/24, Light alloys, which has the responsibility to:

3、A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International St

4、andards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Stand

5、ard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and Europea

6、n developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publ

7、ication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2684 December 2004 ICS 49.025.20 English version Aerospace series - Aluminium alloy AL-P7010- - T7651 - Plate - 6 mm a 140 mm Srie arospatiale - Alliage daluminium AL-P7010- - T7651 - Tle paisse - 6 mm a 140 mm Luft-

8、 und Raumfahrt - Aluminiumlegierung AL-P7010- - T7651 - Platten - 6 mm a 140 mm This European Standard was approved by CEN on 15 July 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio

9、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any

10、 other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finlan

11、d, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR N

12、ORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2684:2004: EEN 2684:2004 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 4 2 Normative references 4 EN 2684:20

13、04 (E) 3 Foreword This document (EN 2684:2004) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Asso

14、ciations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards

15、 shall be withdrawn at the latest by June 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gree

16、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2684:2004 (E) 4 Introduction This standard is part of the series of EN metallic material standards for aerospac

17、e applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-2. 1 Scope This standard specifies the requirements relating to: Aluminium alloy AL-P7010- T7651 Plate 6 mm a 140 mm for aerospace applications. 2 Normative ref

18、erences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materi

19、als General organization of standardization Links between types of EN standards and their use EN 4400-1, Aerospace series Aluminium and aluminium alloy wrought products Technical Specification Part 1: Plate 1)EN 4500-2, Aerospace series Metallic materials Rules for drafting and presentation of mater

20、ial standards Part 2: Specific rules for aluminium, aluminium alloys and magnesium alloys 1) 1) Published as AECMA Prestandard at the date of publication of this standard EN 2684:2004 (E) 5 1 Material designation Aluminium alloy AL-P7010- Others Element Si Fe Cu Mn Mg Cr Ni Zn Zr Ti Each Total Al mi

21、n. 1,5 2,1 5,7 0,10 2 Chemical composition % max. 0,12 0,15 2,0 0,10 2,6 0,05 0,05 6,7 0,16 0,06 0,05 0,15 Base 3 Method of melting 4.1 Form Plate 4.2 Method of production Rolled 4.3 Limit dimension(s) mm 6 a 140 5 Technical specification EN 4400-1 Delivery condition W51 T7651 6.1 Heat treatment 470

22、 C 485 C / WQ 40 C + 1,5 % controlled stretched 3 % 470 C 485 C a / WQ 40 C + 1,5 % controlled stretched 3 % + 115 C 125 C / 4 h t 24 h a+ 165 C 175 C / 6 h t 15 h a6.2 Delivery condition code W U Use condition T7651 T7651 7 Heat treatment Delivery condition + 115 C 125 C / 4 h t 24 h a+ 165 C 175 C

23、 / 6 h t 15 h aDelivery condition Characteristics 8.1 Test sample(s) See EN 4400-1. 8.2 Test piece(s) See EN 4400-1. 8.3 Heat treatment Use condition 9 Dimensions concerned mm 6 a 12,5 12,5 a 25 25 a 40 40 a 60 10 Thickness of cladding on each face % 11 Direction of test piece L LT L LT L LT ST L LT

24、 ST 12 Temperature C Ambient Ambient Ambient Ambient 13 Proof stress R p0,2 MPa 450 450 450 450 450 450 415 445 440 400 14 Strength R m MPa 525 525 525 525 515 515 490 515 515 490 15 Elongation A % A 50mm 8 A 50mm 6 8 6 7 5 3 b 7 5 3 b16 T Reduction of area Z % continued 9 Dimensions concerned mm 60

25、 a 80 80 a 100 100 a 120 120 a 140 10 Thickness of cladding on each face % 11 Direction of test piece L LT ST L LT ST L LT ST L LT ST 12 Temperature C Ambient Ambient Ambient Ambient 13 Proof stress R p0,2 MPa 440 435 390 435 430 390 430 430 380 430 425 370 14 Strength R m MPa 505 510 480 500 505 48

26、0 495 500 470 490 495 460 15 Elongation A % 6 5 3 b 6 5 2,5 c 6 5 2,5 c 5 4 2,5 c 16 T Reduction of area Z % 17 Hardness 18 Shear strength R c MPa 19 Bending k 20 Impact strength 21 Temperature C 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupture stress R MPa 26 C Elongation at rupture A % 27 No

27、tes (see line 98) a,b,c EN 2684:2004 (E) 6 32 Electrical conductivity See EN 4400-1. 7 22,5 MS/m Acceptable 21,5 MS/m 22,5 MS/m Acceptable if R p0,2 LT R p0,2 min. LT + 70 MPa or if stress corrosion test is acceptable. 21,5 MS/m Not acceptable 39 Stress corrosion See EN 4400-1. 6 = 175 MPa 7 t 20 d

28、40 See EN 4400-1. Fracture toughness ( K IC ) 2 The “capability clause“ applies. 7 Dimensions mm L-T MPa m T-L MPa m S-L MPa m 25 a 50 28 25 50 a 75 27 25 23 75 a 100 26 24 23 100 a 140 25 23 22 44 External defects See EN 4400-1. 47 Notch/yield ratio R e/ R p0, 2 See EN 4400-1. 49 Exfoliation corros

29、ion See EN 4400-1. 7 Exfoliation shall not be greater than that of grade EB. 61 Internal defects See EN 4400-1. 82 Batch uniformity See EN 4400-1. 95 Marking inspection See EN 4400-1. 96 Dimensional inspection See EN 4400-1. 98 Notes a Artificial ageing may be carried out using the following alterna

30、tive single stage method : heating to a temperature of 165 C 175 C at a rate not exceeding 20 C / h and soaking at this temperature for 6 h t 15 h. b Or A 4D 3,5 if required by the purchaser c Or A 4D 3 if required by the purchaser 99 Typical use EN 2684:2004 (E) 7 100 Product qualification See EN 4

31、400-1. Qualification programme to be agreed between manufacturer and purchaser. BS EN 2684:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe

32、and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products

33、 and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI

34、offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. F

35、ax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. In

36、formation on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Conta

37、ct the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership

38、Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright C

39、opyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any

40、form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.