BS EN 2713-011-2006 Aerospace series - Cables electrical single and multicore for general purpose - Operating temperatures between -55 C and 200 C - Silver plated copper screened (.pdf

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58general purpose Operating temperatures between p55 C and 200 C Part 011: Silver plated copper scree

2、ned (spiral) and jacketed, UV laser printable Product standardThe European Standard EN 2713-011:2006 has the status of a British StandardICS 49.060Aerospace series Cables, electrical, single and multicore for BRITISH STANDARDBS EN 2713-011:2006BS EN 2713-011:2006This British Standard was published u

3、nder the authority of the Standards Policy and Strategy Committee on 29 September 2006 BSI 2006ISBN 0 580 49149 8Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct app

4、lications.Compliance with a British Standard cannot confer immunity from legal obligation.National forewordThis British Standard was published by BSI. It is the UK implementation of EN 2713-011:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic

5、 electrical and fibre optic technology, to Subcommittee ACE/6/-/2, Aerospace Cables.A list of organizations represented on ACE/6/-/2 can be obtained on request to its secretary.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2713-011 July 2006 ICS 49.060 English Version Aerospace series - Cable

6、s, electrical, single and multicore for general purpose - Operating temperatures between - 55 C and 200 C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard Srie arospatiale - Cbles, lectriques, mono et multiconducteurs dusage gnral - Tempratures d

7、e fonctionnement comprises entre - 55 C et 200 C - Partie 011 : Cuivre argent, blinds (guips) et gains, marquables au laser UV - Norme de produit Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, fr allgemeine Verwendung - Betriebstemperaturen zwischen - 55 C und 200 C - Teil 011: Ver

8、silbertes Kupfer, geschirmt (Umseilung) und ummantelt, UV Laser bedruckbar - Produktnorm This European Standard was approved by CEN on 6 January 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status

9、 of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A ver

10、sion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto

11、nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EURO

12、PISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2713-011:2006: EEN 2713-011:2006 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references

13、4 3 Definitions and symbols .4 4 Materials and construction .4 5 Required characteristics.6 6 Quality assurance7 7 Designation 7 8 Identification and marking 8 9 Packaging, labelling and delivery lengths 8 10 Technical specification .8 EN 2713-011:2006 (E) 3 Foreword This European Standard (EN 2713-

14、011:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Servi

15、ces of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the lat

16、est by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national s

17、tandards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portug

18、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and the United Kingdom. EN 2713-011:2006 (E) 4 1 Scope This standard specifies the characteristics of UV laser printable, single and multicore silver plated copper screened (spiral) and jacketed electrical cables for use in the on-board el

19、ectrical systems of aircraft, at operating temperatures between 55 C and 200 C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838. 2 Normative references The following referenced documents are indispensable fo

20、r the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper and copper alloy conductors for electrical cables Product standard EN

21、2235, Aerospace series Cables, electrical, single and multicore, screened and jacketed Technical specification EN 2266-003, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 200 C Part 003: Ink jet printable Product standard1)EN 2713-002, Aerospace seri

22、es Cables, electrical, single and multicore for general purpose Operating temperatures between 55 C and 200 C Part 002: Screened and jacketed General EN 3475 (series), Aerospace series Cables, electrical, aircraft use Test methods EN 3838, Aerospace series Requirements and tests on user-applied mark

23、ings on aircraft electrical cables EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace stan-dard parts 3 Definitions and symbols See EN 3475-100. 4 Materials and construction 4.1 Materials These cables shall consist of the following: cores according to EN 2266-

24、003, top coat dispersion fluorocarbon; number of cores 1 to 4. 2 to 4-core cables shall be twisted together according to EN 2235. Filler cores shall not be permitted. Screen: silver-plated copper stranded spiral screen; for dimensions of strands, see Table 1; material according to EN 2083, tests acc

25、ording to EN 3475-100; construction according to EN 2235. Outer jacket: 1) In preparation at the date of publication of this standard. EN 2713-011:2006 (E) 5 layer of polyimide with total wall thickness (nominal value) of 30 m, coated on both sides with a layer 2,5 m thick of fluorocarbon; direction

26、 of winding immaterial overlap min. 51 %; top coat of dispersion fluorocarbon, wall thickness 15 m min. including the necessary additives for the acceptance of user-applied UV laser marking. 4.2 Construction See EN 2083 and Table 1. Table 1 Linear Screen External resistance strands diameter at 20 C

27、nominal Mass Nominal section /km diameter mm kg/km Number of cores Code for nominal section mm2AWGamax. mm max. max. 001 0,15 26 160,00 0,08 1,22 4,15 002 0,25 24 114,00 0,08 1,32 5,15 004 0,4 22 60,00 0,08 1,48 6,70 006 0,6 20 33,20 0,08 1,74 10,00 010 1 18 21,10 0,08 1,98 13,85 012 1,2 16 14,50 0,

28、10 2,28 19,45 020 2 14 10,90 0,10 2,53 24,70 030 3 12 6,80 0,10 3,00 36,80 1 051 5 10 4,10 0,10 3,64 57,00 001 0,15 26 165,00 0,08 2,05 7,40 002 0,25 24 117,00 0,08 2,26 9,20 004 0,4 22 61,70 0,08 2,57 12,35 006 0,6 20 34,10 0,10 3,14 19,80 010 1 18 21,70 0,10 3,63 27,60 012 1,2 16 14,90 0,12 4,17 3

29、8,30 2 020 2 14 11,20 0,12 4,67 49,80 001 0,15 26 165,00 0,08 2,18 10,20 002 0,25 24 117,00 0,08 2,40 12,60 004 0,4 22 61,70 0,08 2,74 17,20 006 0,6 20 34,10 0,10 3,35 27,70 010 1 18 21,70 0,10 3,87 39,00 012 1,2 16 14,90 0,12 4,46 54,70 3 020 2 14 11,20 0,15 5,06 72,70 001 0,15 26 165,00 0,08 2,39

30、13,10 002 0,25 24 117,00 0,08 2,64 16,50 004 0,4 22 61,70 0,10 3,07 23,70 006 0,6 20 34,10 0,10 3,70 36,40 010 1 18 21,70 0,12 4,31 52,90 4 012 1,2 16 14,90 0,12 4,94 71,40 aAWG = Closest American Wire Gauge. 4.3 Colour coding of cores and jacket See EN 2713-002. EN 2713-011:2006 (E) 6 5 Required ch

31、aracteristics According to EN 2235 and EN 3475-100. See Table 2. Table 2 EN 3475- Test Details 201 Visual examination Applicable 202 Mass Applicable; see Table 1 203 Dimensions Applicable; see Table 1 301 Electrical resistance per unit length Applicable; see Table 1 302 Voltage proof test Applicable

32、 303 Insulation resistance Applicable 304 Surface resistance Applicable 305 Overload resistance Not applicable 306 Continuity of conductors Applicable 401 Accelerated ageing Applicable Temperature (250 5) C 402 Shrinkage and delamination Applicable Temperature (250 5) C Maximum shrinkage at each end

33、 of cable: jacket 2 mm, core insulation, see EN 2266-003 403 Delamination and blocking Applicable Temperature (250 5) C 404 Thermal shock Applicable Temperature (250 5) C Maximum shrinkage at each end of cable: jacket 2 mm, core insulation, see EN 2266-003 405 Bending at ambient temperature Applicab

34、le 406 Cold bend test Applicable 407 Flammability Applicable Extinguishing time: 3 s max. 408 Fire resistance Not applicable 409 Air-excluded ageing Not applicable 410 Thermal endurance Not applicable 411 Resistance to fluids Applicable 412 Humidity resistance Applicable 501 Dynamic cut-through Not

35、applicable 502 Notch propagation Applicable Notch depth: 40 m 503 Scrape abrasion Applicable Test force on needle for cables 0,15 mm2to 0,60 mm2= 5 N 1,00 mm2to 1,20 mm2= 7 N 2,00 mm2to 5,00 mm2= 9 N 504 Torsion Not applicable EN 2713-011:2006 (E) 7 Table 2 (concluded) EN 3475- Test Details 505 Tens

36、ile test on concentric conductors and strands Applicable 506 Plating continuity Applicable 507 Adherence of plating Applicable 508 Plating thickness Applicable 509 Solderability Applicable 511 Cable to cable abrasion Not applicable 512 Flexure endurance Not applicable 601 Smoke density Applicable 60

37、2 Toxicity Applicable 603 Resistance to wet arc tracking and electric arc propagation Not applicable 604 Resistance to dry arc tracking and electric arc propagation Not applicable 605 Wet short circuit Not applicable 701 Strippability and adherence of insulation to the conductor Applicable 702 Braid

38、 screen pushback capability Not applicable 703 Permanence of manufacturers marking Applicable 704 Flexibility Not applicable 6 Quality assurance See EN 9133 7 Designation EXAMPLE Description block Identity block CABLE, ELECTRICAL EN2713-011 B 002 F Number of this standard Code letter for number of c

39、ores (see EN 2713-002, Table 1) Code for nominal section (see Table 1) Code letter for colour coding of cores and jacket (see EN 2713-002, Tables 2 to 8) NOTE: If necessary, the code I9005 shall be placed between the description block and the identity block. EN 2713-011:2006 (E) 8 8 Identification a

40、nd marking See EN 2713-002. 9 Packaging, labelling and delivery lengths See EN 2235. 10 Technical specification See EN 2235. blankBS EN BSI389 Chiswick High RoadLondonW4 4AL2713-011:2006BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards.

41、 It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim

42、of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0

43、)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Cust

44、omer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British

45、Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details

46、on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these

47、and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website a

48、t http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval sy

49、stem or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these det