BS EN 3155-042-2006 Aerospace series - Electrical contacts used in elements of connection - Contacts electrical triaxial size 08 male 042 type D solder class P Product standard《航空航.pdf

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58connection Part 042: Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P Pro

2、duct standardThe European Standard EN 3155-042:2006 has the status of a British StandardICS 49.060Aerospace series Electrical contacts used in elements of BRITISH STANDARDBS EN 3155-042:2006BS EN 3155-042:2006This British Standard was published under the authority of the Standards Policy and Strateg

3、y Committee on 29 September 2006 BSI 2006ISBN 0 580 49154 4Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot con

4、fer immunity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK implementation of EN 3155-042:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommitte

5、e ACE/6/-/3, Aerospace Connectors. A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3155-042April 2006ICS 49.060English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 042

6、: Contacts, electrical, triaxial, size 08, male042, type D, solder, class P - Product standardSrie arospatiale - Contacts lectriques utiliss dans lesorganes de connexion - Partie 042 : Contacts lectriques,triaxiaux, taille 08, mles 042, type D, souder, classe P -Norme de produitLuft- und Raumfahrt -

7、 Elektrische Kontakte zur Verwendungin Verbindungselementen - Teil 042: Elektrische triaxiale,Stiftkontakte 042, Gre 08, Typ D, zum Lten, Klasse P -ProduktnormThis European Standard was approved by CEN on 6 January 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which

8、stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard

9、exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bo

10、dies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMI

11、TTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-042:2006: EEN 3155-042:2006 (E) 2 Co

12、ntents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.5 4 Required characteristics 5 4.1 Dimensions and mass 5 4.2 Material, surface treatment of contact.6 4.3 Permitted cables .6 4.4 Tooling.7 4.5 Test 7 4.6 Gauges.10 5 Designation .11 6 Marking 11 Annex A (normative)

13、.12 EN 3155-042:2006 (E) 3 Foreword This European Standard (EN 3155-042:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received th

14、e approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006,

15、and conflicting national standards shall be withdrawn at the latest by October 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. A

16、ccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit

17、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3155-042:2006 (E) 4 1 Scope This standard specifies the required characteristics and tests applicable to male triaxial contacts 042, size 08, type D, s

18、older, class P, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contacts are defined in EN 3155-043. These contacts are derived from and are interchangeable with those of standard AS 39029/96. 2 Normative references The follo

19、wing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591*, Aerospace series Elements of electrical and opti

20、cal connection Test methods. EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification. 1)EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts. EN 3155-043, Aerospace serie

21、s Electrical contacts used in elements of connection Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P Product standard. EN 3375-003, Aerospace series Cables, electrical, for signal data transmissions Part 003: Cables, bifilar, single braid. 2)EN 3375-004, Aerosp

22、ace series Cables, electrical, for signal data transmissions Part 004: Cables, bifilar, double braid. 2)EN 3375-005, Aerospace series Cables, electrical, for signal data transmissions Part 005: Cables, bifilar, double braid, high immunity. 2)EN 4008-002, Aerospace series Elements of electrical and o

23、ptical connection Crimping tools and associated accessories Part 002: List of product standards. MIL-I-81969, Installing and removal tools, connector electrical contact, general specification for. 3)AS 39029/96, Contacts, electrical connector concentric twinax, pin, size 8 (for DOD-C-83527 connector

24、).4)*All parts quoted in this standard. 1) Published as AECMA Prestandard at the date of publication of this standard. 2) In preparation at the date of publication of this standard. 3) Published by: Department of Defense (DOD), The Pentagon, Washington D.C. 20301, USA. 4) Published by: Society of Au

25、tomotive Engineering (SAE), 400 Commonwealth Drive, Warrendale, PA 15096, USA. EN 3155-042:2006 (E) 5 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3155-001 apply. 4 Required characteristics Type D contacts are contacts with screening feature and cl

26、ass P corresponds to an operating temperature range from 65 C to 125 C. 4.1 Dimensions and mass See Figure 1 and Figure 2 for dimensions and tolerances. Dimensions are given in millimetres after treatment. Total mass of contact: 3,90 g max. Key 1 Heat shrinkable sleeve, the sealing sleeve is defined

27、 in Annex A. 2 After wiring 3 Diameter compatible with an intermediate pin diameter 2,870 0,025 4 Point of contact with a flat ended gauge pin of diameter 2,870 0,005 5 End of inner male contact Figure 1 EN 3155-042:2006 (E) 6 Key 1 Flat 0,2 max. Figure 2 Detail of end of a male contact 4.2 Material

28、, surface treatment of contact 4.2.1 Body material Copper alloy for the contact bodies. 4.2.2 Protection Gold on an appropriate undercoat for copper alloy parts (selective protection permitted). Thickness of protection not specified. 4.3 Permitted cables Single braided cable: in accordance with EN 3

29、375-003 Double braided cable: in accordance with EN 3375-004 Code A, see Clause 5. High immunity cable: in accordance with EN 3375-005 A single type of contact covers these three types of permitted cables. For cable stripping, see Figure 3. Dimensions and tolerances are in millimetres. EN 3155-042:2

30、006 (E) 7 Key 1 Sheath 2 Braiding 3 Isolation 4 Conductor Figure 3 4.4 Tooling Conform to MILI-81969. Insertion: not necessary Extraction tool: M81969/14-06 Contact termination: The contact termination tooling shall be defined in EN 4008-002. 4.5 Test See Table 1. EN 3155-042:2006 (E) 8 Table 1 Appl

31、icable EN 2591- Test According toEN 3155-001Remarks 101 Visual examination X 102 Examination of dimensions and mass X X Cable used: 152 mm of cable as per EN 3375-003 201 Contact resistance - low level Contact Maximum contact resistance m Initial After tests Centre 15 30 Intermediate 15 30 Outer Not

32、 applicable X Cable used: 152 mm of cable as per EN 3375-003 202 Contact resistance at rated current Contact Maximum contact resistance m Rated current A (23 + 3) C (125 + 3) C Initial After testsAfter tests Centre 15 30 45 1 Intermediate 15 30 45 1 Outer 2,9 3,85 5,8 12 204 Discontinuity of contact

33、s in the microsecond range X Method B Duration of discontinuity: 100 ns Test duration: throughout the duration of tests EN 2591-402 and EN 2591-403 206 Measurement of insulation resistance X Method C Room temperature: 5 G High temperature: 2 G at the maximum temperature specified continued EN 3155-0

34、42:2006 (E) 9 Table 1 (continued) Applicable EN 2591- Test According toEN 3155-001Remarks 207 Voltage proof test X Method C Withstand voltage at sea level: 500 V Voltage r.m.s. between centre contact and intermediate contact and between intermediate contact and outer contact Withstand voltage at alt

35、itude: 125 V Voltage r.m.s at pressure 4,7 kPa (21 000 m) Leakage current: not applicable 301 Endurance at temperature X Method B Duration: 100 h Measurements during test: EN 2591-206 305 Rapid change of temperature X Contacts wired and mated TA= 125 C TB= 65 C t1 = 30 min Initial and final measurem

36、ents: not applicable 306 Mould growth X 307 Salt mist X 315 Fluid resistance X 402 Shock X Method A : severity 300 The triaxial contacts are connected to cable which complies with EN 3375-003 then fitted in connectors. The connectors fitted with normal cable clamps are mated and mounted on the fixtu

37、re, using their normal mounting systems. Number of shocks: Three successive shocks i.e. a total of 18 Discontinuity: 100 ns continued EN 3155-042:2006 (E) 10 Table 1 (concluded) Applicable EN 2591- Test According toEN 3155-001Remarks 403 Sinusoidal and random vibration X Method B, Figure 3, level J

38、The triaxial contacts are connected to cable which complies with EN 3375-003, then fitted in connectors. The auxiliary contacts are wired and fitted. The connectors fitted with normal cable clamps are mated and mounted on the fixture using their normal mounting systems. The cables are clamped a mini

39、mum of 200 mm from the rear of the contacts at a fixed point of the assembly. Duration of test: 16 h including 8 h in the longitudinal axis and 8 h in an axis perpendicular to this. Discontinuity: 100 ns Test temperature: (23 5) C 406 Mechanical endurance X X The gauge is defined in Figure 4 and Tab

40、le 2. Gauge Minimum extraction force N Maximum insertion force N Initial After test Initial After test max. NA NA 5,56 6,67 min. 0,85 0,71 NA NA 418 Gauge insertion/extraction forces (female contacts) 508 Measurement of thickness of coating on contacts X The measured thickness shall be recorded. 509

41、 Adhesion of coating on contacts X 4.6 Gauges See Figure 4 and Table 2. Dimensions are in millimetres. Material: tool steel or carbide steel EN 3155-042:2006 (E) 11 Figure 4 Table 2 Gauge A B C L R 2,895 max. 2,890 0,78 13,08 0,63 2,850 min. 2,845 2,3 0,73 12,83 0,50 5 Designation EXAMPLE Descriptio

42、n block CONTACT, ELECTRICALIdentity block EN3155-042M08A Number of this standard Type of contact: M = male Contact size code Sealing sleeve code: A = without sleeve B = with sleeve NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 6 Marking See E

43、N 3155-001 for manufacturers mark. Colour code: none EN 3155-042:2006 (E) 12 Annex A (normative) Sealing sleeve See Figure A.1. Dimensions are in millimetres. Figure A.1 blankBS EN BSI389 Chiswick High RoadLondonW4 4AL3155-042:2006BSI British Standards InstitutionBSI is the independent national body

44、 responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest a

45、mendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be

46、 found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign stand

47、ards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation

48、of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information se

49、rvices are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 700