BS EN 3155-077-2012 Aerospace series Electrical contacts used in elements of connection Contacts electrical female type A crimp class R Product standard《航空航天系列 用于连接元件用的电触点 R级压接A型公头.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 3155-077:2012Aerospace series Electricalcontacts used in elements ofconnectionPart 077: Contacts, electrical, female, typeA, crimp, class R Product standardBS EN 3155-077:2

2、012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 3155-077:2012.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can

3、beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 63610 3ICS 49.060Compliance with a British Standard cannot confer immu

4、nity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedBS EN 3155-077:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3155-077 January 2012 ICS 4

5、9.060 English Version Aerospace series - Electrical contacts used in elements of connection - Part 077: Contacts, electrical, female, type A, crimp, class R - Product standard Srie arospatiale - Contacts lectriques utiliss dans les organes de connexion - Partie 077: Contacts lectriques, femelles, ty

6、pe A, sertir, classe R - Norme de produit Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 077: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse R - Produktnorm This European Standard was approved by CEN on 4 May 2011. CEN members are bound to comply with

7、the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Managem

8、ent Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same statu

9、s as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

10、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any me

11、ans reserved worldwide for CEN national Members. Ref. No. EN 3155-077:2012: EBS EN 3155-077:2012EN 3155-077:2012 (E) 2 Contents Page Foreword 2Introduction .41 Scope 42 Normative references 43 Terms, definitions and abbreviations 54 Requirements .55 Designation . 166 Marking 167 Technical specificat

12、ion 16BS EN 3155-077:2012EN 3155-077:2012 (E) 3 Foreword This document (EN 3155-077:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standar

13、d has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by

14、 July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent

15、rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

16、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3155-077:2012EN 3155-077:2012 (E) 4 Introduction The contacts defined by this standard are to be used in connect

17、ors defined by EN 4644-001. The contact #22 defined by this standard are derived from those of SAE AS 39029-12 and are intermateable with those of SAE AS 39029-11. 1 Scope This European Standard specifies the required characteristics, tests and tooling applicable to female contacts size 22, 20, 16,

18、12, 8 and 5, type A, crimp, class R, used in elements of connection according to EN 3155-002. It should be used together with EN 3155-001. The associated male contacts are defined in EN 3155-076. 2 Normative references The following referenced documents are indispensable for the application of this

19、document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper and copper alloys conductors for electrical cables Product standard EN 2591 (all parts), Aerospac

20、e series Elements of electrical and optical connection Test methodsFEN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of co

21、ntacts EN 3155-076, Aerospace series Electrical contacts used in elements of connection Part 076: Contacts, electrical, male, type A, crimp, class R Product standard EN 4644-001, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175

22、C (or 125 C) continuous Part 001: Technical specification ISO 8843, Aircraft Crimp-removable contacts for electrical connectors Identification system MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire termination, and tool kits general specification for 1)MIL-I-81969, Installing a

23、nd removal tools, connector electrical contact, general specification for 1)SAE AS 39029, Contacts, electrical connector, general specification for 2)1) Published by: DoD National (US) Mil. Department of Defense http:/www.defenselink.mil/. 2) Published by: SAE National (US) Society of Automotive Eng

24、ineers http:/www.sae.org/ BS EN 3155-077:2012EN 3155-077:2012 (E) 5 3 Terms, definitions and abbreviations For the purposes of this standard, the terms, definitions and abbreviations given in EN 3155-001 apply. 4 Requirements 4.1 Specific characteristics Type A contacts are for general application a

25、nd class R corresponds to an operating temperature range from 65 C to 175 C. 4.2 Dimensions and mass See Figures 1 to 3 and Table 1. Key 1 Beginning at the interface where the sleeve meets the barrel of the contact. 2 One hole N 3 Area for colour band marking (see Table 2). 4 Distance from contact s

26、houlder to socket contact extremity. 5 Distance between socket contact extremely and contact electrical point. Figure 1 Key 1 Chamfer or radius 2 One hole N Figure 2 Size 16, 12 and 8 crimp barrel BS EN 3155-077:2012EN 3155-077:2012 (E) 6 Figure 3 Contact 8-8 mating side detail Key 1 Area for colour

27、 band marking (see Table 2) 2 One hole N 3 Chamfer or radius Figure 4 Contact 16-16, 12-12, 8-8 crimp barrel detail BS EN 3155-077:2012EN 3155-077:2012 (E) 7 Key 1 Chamfer J 2 One hole N Figure 5 Contact 5-5 BS EN 3155-077:2012EN 3155-077:2012 (E) 8 Table 1 Size A B C D E F FF G H J JJ K rad. rad. C

28、ontact Barrel max. 22 22 1,32 1,27 1,17 1,04 0,94 0,89 1,78 1,73 1,52 1,50 0,89 0,84 1,22 1,16 1,55 1,52 0,86 0,81 0,05 0,08 20 20 1,73 1,68 1,45 1,35 1,17 1,12 2,13 2,08 1,88 1,83 1,12 1,07 1,60 1,40 0,86 0,81 0,05 0,08 16 16 2,62 2,57 2,26 2,06 1,73 1,68 3,35 3,30 2,87 2,79 1,73 1,65 2,40 2,20 1,2

29、2 1,17 0,08 0,13 2,77 2,72 12 12 3,84 3,79 3,63 3,43 2,59 2,49 4,78 4,72 4,09 4,01 2,51 2,44 3,20 3,00 1,22 1,17 0,08 0,13 4,01 3,94 8 8 6,71 6,65 6,30 6,09 4.70 4.59 8,01 7,95 7,01 6.95 3,79 3,73 6,80 6,69 7,31 7,26 0,83 0,76 0,15 7,01 6,95 5 5 6,50 6,42 5,70 5,49 4.65 4.57 7,01 6,93 7,01 6.95 4,63

30、 4,57 6,10 5,89 1,41 1,30 Size L M N P S T U V W Extraction Insertion Mass force force g Contact Barrel min. min. max. 22 22 10,46 10,21 5,99 5,79 0,56 0,43 4,09 3,61 0,51 0,30 8,84 8,76 2,95 2,69 7,11 0,30 1,30 0,17 20 20 10,46 10,34 4,10 3,89 0,79 0,69 4,70 4,19 0,61 0,51 9,05 8,94 0,81 0,61 6,75

31、0,21 1,70 0,37 16 16 10,77 10,62 6,50 6,30 1,04 0,94 7,29 6,68 1,50 1,30 0,76 0,51 8,76 8,66 0,81 0,61 7,11 0,57 3,40 0,76 12 12 10,77 10,62 6,50 6,30 1,04 0,94 7,29 6,68 1,50 1,30 0,76 0,51 8,76 8,66 0,81 0,61 7,30 0,85 4,25 1,60 8 8 12,23 11,96 1,86 1,75 12,96 12,45 2,60 2,40 1,60 1,40 15,21 15,10

32、 1,34 1,07 11,50 4,50 26 4,80 5 5 12,12 11,88 1,10 0,89 10,62 10,39 1,01 0,69 10,19 10,08 2,50 2,10 8,15 3,00 26 3,90 BS EN 3155-077:2012EN 3155-077:2012 (E) 9 4.3 Marking by colour code See Table 2. Table 2 Two bands according to ISO 8843 Three bands according to SAE AS 39029/12 Size Contact Barrel

33、 Band 1 Band 2 Band 1 Band 2 Band 3 22 22 Green Green (optional) Brown Yellow Grey 20 20 Red Red (optional) b b b 16 16 Blue Blue (optional) b b b 12 12 Yellow Yellow (optional) b b b 8 8 Red Not applicable b b b 5 5 a a b b b a Size 5 contact is not defined in ISO 8843, therefore no colour code is

34、defined for size 5 contacts. As soon as ISO 8843 defines a size 5 contact, Table 2 will be updated accordingly. b This contact is not defined in SAE AS 39029/12.4.4 Material, surface treatment Body material: copper alloy. Surface treatment: gold on appropriate undercoat, thickness of protection not

35、specified, selective plating permitted. BS EN 3155-077:2012EN 3155-077:2012 (E) 10 4.5 Permissible cables See Table 3. Table 3 Size Size of conductors Rated test current A Contact Barrel AECMA CodeSection mm2AWG a22 22 004 0,40 22 5 002 0,25 24 3 001 0,15 26 2 20 20 006 0,60 20 7,5 004 0,40 22 5 002

36、 0,25 24 3 16 16 012 1,2 16 13 010 1,0 18 11006 0,6 20 7,5 12 12 030 3 12 23020 2 14 17 8 8 090 12 8 46050 9 10 33 5 5 090 12 8 46050 9 10 33 aAWG = Closest American Wire Gage. 4.6 Tooling 4.6.1 Crimping tools According to MIL-DTL-22520, see Table 4. The qualification selector numbers used for crimp

37、ing copper or copper alloy conductors in cables EN 2083 are indicated in Table 4. It is the user responsibility if the parameters in Table 4 are changed for service use. BS EN 3155-077:2012EN 3155-077:2012 (E) 11 Table 4 Contact Cable size Tools M22520/1-01 Tools M22520/2-01 Tools M22520/23-01 Conta

38、ct size Barrel size AECMA code AWGaPositioner/Locator Selector number Positioner/Locator Selector number Positioner/Locator Die 22 22 001 26 Not applicable M22520/2-233 Not applicable 002 24 3 003 22 4 20 20 002 24 Not applicable M22520/2-085 Not applicable 004 22 6 006 20 7 16 16 006 20 M22520/1-02

39、4 Not applicable Not applicable 010 18 5 012 16 6 12 12 020 14 M22520/1-027 Not applicable Not applicable 030 12 8 8 8 090 8 Not applicable Not applicable M22520/2-235 5 050 10 Not applicable Not applicable M22520/2-23090 8 aAWG = Closest American Wire Gage. 4.6.2 Insertion / extraction tools Accord

40、ing to MIL-I-81969. See Table 5. Table 5 Size Insertion tools Extraction tools Contact Barrel 22 22 M81969/8-01 M81969/1-01 20 20 M81969/8-02 M81969/1-0216 16 M81969/8-03 M81969/1-03 12 12 Not applicable M81969/28-02 or M81969/14-04 8 8 Not applicable M81969/14-065 5 Not applicable M81969/28-01 BS E

41、N 3155-077:2012EN 3155-077:2012 (E) 12 4.7 Cable striping See Table 6. Table 6 Size Stripped length of cable 0,5 mm Contact Cable 22 22 3,520 20 4 16 16 6 12 12 6 8 8 10,00 / 12,30 5 5 9,60 / 10,104.8 Tests Test details to be in accordance with Table 7, EN 3155-001 and EN 2591-100. Table 7 EN 2591-

42、Test Not applicable Applicable According to EN 3155-001 Remarks 101 Visual examination X 102 Examination of dimension and mass X See 4.2. 201 Contact resistance Low level X 202 Contact resistance at rated current X 203 Electrical continuity at microvolt level X 204 Discontinuity of contacts in the m

43、icrosecond range X 205 Housing (shell) electrical continuity X 206 Measurement of insulation resistance X 207 Voltage proof test X 208 Temperature rise due to rated current X 209 Current temperature derating X 210 Electrical overload X 211 Capacitance X212 Surface transfert impedance X continued BS

44、EN 3155-077:2012EN 3155-077:2012 (E) 13 Table 7 (continued) EN 2591- Test Not applicable Applicable According to EN 3155-001 Remarks 213 Shielding effectiveness from 100 MHz to 1 GHz X 214 Lightning strike, current and voltage pulse X 216 Engagement of contacts X 220 Contact /conductor joint ageing

45、by current and temperature cycling X 221 Voltage Standing Wave Ratio (VSWR) X 222 Insertion Loss (I.L) X 223 Measurement of characteristic impedance of a coaxial connector or contact X 224 RF leakage X 226 Corona level X 301 Endurance at temperature X T = (17505+)C Duration: 1 000 h 302 Climatic seq

46、uence X 303 Cold / low pressure and damp heat X 304 Damp heat steady state X 305 Rapid change of temperature X TA= (17505+)C TB= ( 6505+)C 306 Mould growth X 307 Salt mist X 308 Sand and dust X 309 Dry heat X 310 Cold X 311 Low air pressure X 312 Air leakage X 313 Driving rain (artificial) X 314 Imm

47、ersion at low air pressure X 315 Fluid resistance X 316 Ozone resistance X 317 Flammability X continued BS EN 3155-077:2012EN 3155-077:2012 (E) 14 Table 7 (continued) EN 2591- Test Not applicable Applicable According to EN 3155-001 Remarks 318 Fire-resistance X 319 Gastightness of solderless wrapped

48、 connections X 320 Simulated solar radiation at ground level X 321 Damp heat, cyclic test X 322 Hermeticity X 323 Thermal shock X 324 Interfacial sealing X 325 Ice resistance X 401 Acceleration steady state X 402 Shock X Method A severity 30 403 Sinusoidal and random vibration X Method B test curve

49、3 (three) level G 404 Transverse load X 405 Axial load X 406 Mechanical endurance X 407 Durability of contact retention system and seals (Maintenance ageing) X 408 Mating and unmating forces X 409 Contact retention in insert X 410 Insert retention in housing (axial) X 411 Insert retention in housing (torsional) X 412 Contac