BS EN 3384-2012 Aerospace series Rings retaining external axial mounting steel phosphated《航空航天系列 磷酸盐钢制 轴向安装 外部定位吊环》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 3384:2012Aerospace series Ringsretaining, external, axialmounting, steel, phosphatedBS EN 3384:2012 BRITISH STANDARDNational forewordThis British Standard is the UK impleme

2、ntation of EN 3384:2012.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the

3、necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 75988 8ICS 49.030.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard

4、was published under the authority of theStandards Policy and Strategy Committee on 31 March 2012.Amendments issued since publicationDate Text affectedBS EN 3384:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3384 March 2012 ICS 49.030.50 English Version Aerospace series - Rings retaining,

5、external, axial mounting, steel, phosphated Srie arospatiale - Anneaux darrt, montage axial, type extrieur, en acier, phosphats Luft- und Raumfahrt - Sicherungsringe, axial auf Wellen montierbar, aus Stahl, phosphatiert This European Standard was approved by CEN on 24 September 2011. CEN members are

6、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to t

7、he CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Cen

8、tre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Nor

9、way, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in

10、any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3384:2012: EBS EN 3384:2012EN 3384:2012 (E) 2 Contents Page Foreword . 31 Scope and field of application . 42 Normative references . 43 Required characteristics 43.1 Configuration Dimensions Masses 43.2 Materials . 43

11、.3 Surface treatment 44 Designation 85 Marking. 86 Technical specification . 87 Mounting 8BS EN 3384:2012EN 3384:2012 (E) 3 Foreword This document (EN 3384:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes ca

12、rried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either

13、 by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN an

14、d/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Cze

15、ch Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3384:2012EN 3384:2012 (E) 4 1

16、Scope and field of application This standard defines the characteristics of axial mounting external retaining rings, in steel, phosphated, for aerospace applications. The phosphating restricts the use at temperatures not exceeding 200 C. 2 Normative references The following documents, in whole or in

17、 part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace

18、 products EN 3380, Aerospace series Rings retaining Technical specification EN 3426, Aerospace series Groove dimensions for axial mounting external type retaining rings 3 Required characteristics 3.1 Configuration Dimensions Masses See figure 1 and table. 3.2 Materials Spring steel: 480530 HV (Diame

19、ter codes 008 to 038) 440510 HV (Diameter codes 040 to 165) 3.3 Surface treatment Phosphate to EN 2793, class A Before storing, the ring shall be protected by grease or oil. NOTE Details of form not stated are left to the manufacturers option. BS EN 3384:2012EN 3384:2012 (E) 5 Key: a Free b Alternat

20、ive configuration for size 40 mm to 165 mm c Value in Micrometres, apply prior to phosphating d Table e At mounting f Installed g Diameter codes 003 to 009 h Diameter codes 010 to 165 Figure 1 BS EN 3384:2012EN 3384:2012 (E) 6 Table 1 Dimensions in millimetres Diameter code bA B cD1D2D3D4P S R Mass

21、dmax. nom. Tol. max. max. min. h11 max. kg/1 000 pieces 003 1,9 0,8 2,7 +0,06 0,12 7,2 6,6 0,8 0,1 0,4 0,04 0,017 004 2,2 0,9 3,7 +0,07 0,15 8,8 8,2 1 0,022 005 2,5 1,1 4,7 10,7 9,8 0,6 0,06 0,066 006 2,7 1,3 5,6 12,2 11,1 1,15 0,7 0,07 0,084 007 3,1 1,4 6,5 +0,09 0,18 13,8 12,9 1,2 0,8 0,08 0,121 0

22、08 3,2 1,5 7,4 15,2 14 0,158 009 3,3 1,7 8,4 16,4 15,2 1 0,1 0,300 010 3,3 1,8 9,3 +0,15 0,3 17,6 16,2 1,5 0,340 011 3,3 1,8 10,2 +0,18 0,36 18,6 17,1 0,410 012 3,3 1,8 11 19,6 18,1 1,7 0,500 013 3,4 2 11,9 20,8 19,2 0,530 014 3,5 2,1 12,9 22 20,4 0,640 015 3,6 2,2 13,8 23,2 21,5 0,670 016 3,7 2,2 1

23、4,7 24,4 22,6 0,700 017 3,8 2,3 15,7 25,6 23,8 0,820 018 3,9 2,4 16,5 26,8 24,8 2 1,2 0,12 1,110 019 3,9 2,5 17,5 27,8 25,8 1,220 020 4 2,6 18,5+0,21 0,42 29 27 1,300 021 4,1 2,7 19,5 30,2 28,2 1,420 022 4,2 2,8 20,5 31,4 29,4 1,500 024 4,4 3 22,2 33,8 31,7 0,15 1,770 025 4,4 3 23,2 34,8 32,7 1,900

24、026 4,5 3,1 24,2 36 33,9 1,960 028 4,7 3,2 25,9 38,4 36 1,5 0,15 2,920 029 4,8 3,4 26,9 39,6 37,2 3,200 030 5 3,5 27,9 41 38,6 3,320032 5,2 3,6 29,6 43,4 40,7 2,5 3,540 034 5,4 3,8 31,5 +0,25 0,5 45,8 43,1 3,800 035 5,6 3,9 32,2 47,2 44,2 4,000 036 5,6 4 33,2 48,2 45,2 1,75 0,17 5,000 038 5,8 4,2 35

25、,2 50,6 47,6 5,620 040 6 4,4 36,5+0,39 0,78 53 49,5 0,2 6,030 042 6,5 4,5 38,5 56 52,5 6,500 045 6,7 4,7 41,5 59,4 55,9 7,500 048 6,9 5 44,5 62,8 59,3 7,900 050 6,9 5,1 45,8 64,8 60,8 2 0,2 10,200 052 7 5,2 47,8 67 63 11,100055 7,2 5,4 50,8 +0,46 0,92 70,4 66,4 11,400 056 7,3 5,5 51,8 71,6 67,6 11,8

26、00 058 7,3 5,6 53,8 73,6 69,6 12,600 060 7,4 5,8 55,8 75,8 71,8 12,900 062 7,5 6 57,8 78 74 14,300 063 7,6 6,2 58,8 79,2 75,2 15,900 065 7,8 6,3 60,8 81,6 77,6 3 2,5 0,25 18,200 068 8 6,5 63,5 85 81 21,800070 8,1 6,6 65,5 87,2 83,2 22,000 072 8,2 6,8 67,5 89,4 85,4 22,500 075 8,4 7 70,5 92,8 88,8 24

27、,600 077 8,5 7,2 72,5 95 91 25,700 aSee page 7. bSee page 7. cSee page 7. dSee page 7. BS EN 3384:2012EN 3384:2012 (E) 7 Table 1 (concluded) Dimensions in millimetres Diameter code bA B cD1D2D3D4P S R Mass dmax. nom. Tol. max. max. min. h11 max. kg/1 000 pieces 078 8,6 7,3 73,5 +0,460,92 96,2 92,2 3

28、 0,2 2,5 0,25 26,200 080 8,6 7,4 74,5 98,2 93,7 27,300 082 8,7 7,6 76,5 101 95,9 31,200 085 8,7 7,8 79,5 104 98,9 3,5 0,25 3 0,3 36,400 087 8,8 7,9 81,5 +0,541,08 106 101,1 39,800 088 8,8 8 82,5 107 102,1 41,200 090 8,8 8,2 84,5 109 104,1 44,500 092 9 8,4 86,5 111 106,5 46,000 095 9,4 8,6 89,5 115 1

29、10,3 49,000 097 9,4 8,8 91,5 117 112,3 50,200 098 9,5 9 92,5 119 113,5 51,800 100 9,6 9 94,5 121 115,7 53,700 102 9,7 9,2 95 123 117,4 4 0,4 78,000 105 9,9 9,3 98 126 120,8 80,000 107 10 9,5 100 129 123 81,000 108 10 9,5 101 130 124 81,500 110 10,1 9,6 103 132 126,2 82,000 112 10,3 9,7 105 134 128,6

30、 83,000 115 10,6 9,8 108 138 132,2 84,000 117 10,8 10 110 140 134,6 85,000 118 10,9 10,1 111 141 135,8 85,500 120 11 10,2 113 143 138 86,000 122 11,2 10,3 115 146 140,4 4 88,000 125 11,4 10,4 118 149 143,8 90,000 127 11,4 10,5 120 +0,631,26 151 145,8 95,000 128 11,5 10,5 121 152 147 98,000 130 11,6

31、10,7 123 155 149,2 100,000 132 11,7 10,8 125 157 151,4 103,000 135 11,8 11 128 160 154,6 104,000 137 11,9 11 130 162 156,8 107,000 138 11,9 11,1 131 163 157,8 108,000 140 12 11,2 133 165 160 110,000 142 12,1 11,3 135 168 162,2 112,000 145 12,2 11,5 138 171 165,4 115,000 147 12,3 11,6 140 173 167,6 1

32、16,000 148 12,4 11,7 141 174 168,8 118,000 150 13 11,8 142 177 171 120,000 152 13 11,9 143 178 173 128,000 155 13 12 146 182 176 135,000 157 13,1 12 148 183,2 178,2 140,000 158 13,1 12,1 149 184,2 179,2 145,000 160 13,3 12,2 151 188 181,6 150,000 162 13,3 12,3 152,5 188,6 183,6 155,000 165 13,5 12,5

33、 155,5 193 187 160,000 aValues apply after phosphating. bCorresponds to the nominal diameter (expressed in millimetres) of the shaft on which the ring shall be mounted (see EN 3426). cShall not exceed “A” max. dApproximate values, calculated on the basis of 7,85 kg/dm3, given for information purpose

34、 only. BS EN 3384:2012EN 3384:2012 (E) 8 4 Designation EXAMPLE Description blockRETAINING RING, EXTERNAL, AXIAL MOUNTING Identity block EN 3384 016 Number of EN Standard Diameter code (See table) NOTE If necessary, the originator code I9005 shall be placed between the description block and the ident

35、ity block. 5 Marking EN 2424, style G. 6 Technical specification EN 3380 7 Mounting EN 3426 This page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on

36、 standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20

37、 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be

38、grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44

39、 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy v

40、ersions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international st

41、andards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax:

42、 +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email:

43、 Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the pr

44、operty of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act

45、1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email: