BS EN 3614-2009 Aerospace series - Bolts normal hexagonal head relieved shank long thread in heat resisting steel FE-PA2601 (A286) silver plated - Classification 900 MPa 650 C《航空航天.pdf

1、BS EN 3614:2009ICS 49.030.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Bolts, normalhexagonal head,relieved shank,long thread, in heatresisting steel FE-PA2601 (A286), silverplated Classification:900 MPa / 650 CThis British Standardwas publ

2、ished under theauthority of the StandardsPolicy and StrategyCommittee on 31 August2009 BSI 2009ISBN 978 0 580 68801 0Amendments/corrigenda issued since publicationDate CommentsBS EN 3614:2009National forewordThis British Standard is the UK implementation of EN 3614:2009.The UK participation in its p

3、reparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsi

4、ble for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 3614:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3614 July 2009 ICS 49.030.20 English Version Aerospace series - Bolts, normal hexagonal head, relieved shank, long threa

5、d, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 900 MPa / 650 C Srie arospatiale - Vis tte hexagonale normale, ft dgag, filetage long, en acier rsistant chaud FE-PA2601 (A286), argentes - Classification: 900 MPa / 650 C Luft- und Raumfahrt - Sechskantschrauben, Dnnschaft

6、, langes Gewinde, aus hochwarmfestem Stahl FE-PA2601 (A286), versilbert - Klasse: 900 MPa / 650 C This European Standard was approved by CEN on 13 June 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

7、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Germa

8、n). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Re

9、public, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN

10、DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3614:2009: EBS EN 3614:2009EN 3614:2009 (E) 2 Contents Page Foreword 31 Scope

11、 42 Normative references 43 Requirements characteristics 44 Designation 85 Marking .86 Technical specification .8BS EN 3614:2009EN 3614:2009 (E) 3 Foreword This document (EN 3614:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After

12、 enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a na

13、tional standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of pa

14、tent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, C

15、yprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3614:2009EN 3614:2009 (E) 4

16、1 Scope This standard specifies the characteristics of silver plated bolts normal hexagonal head with relieved shank and long thread in heat resisting steel FE-PA2601 (A286), for aerospace applications. Classification: 900 MPa 1)/ 650 C 2)2 Normative references The following referenced documents are

17、 indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3353-1, Aerospace Lead and runout threads Part 1: Rolled external threads. ISO 5855

18、-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts. EN 2399, Aerospace series Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) Rm 900 MPa Bars for forged bolts D 25 mm. EN 2424, Aerospace series Marking of aerospace products. EN 2576, Aerospace series Bolts in heat resisting steel

19、 FE-PA92HT (A286) Classification: 900 MPa/650 C Technical specification. 3)EN 2786, Aerospace series Electrolytic silver plating of fasteners. 3 Requirements characteristics 3.1 Configuration Dimensions Tolerances Configuration: See Figure 1. Dimensions and tolerances: See Figure 1 and Tables 1 and

20、2. Dimensions are in millimetres. Values apply after silver plating. 3.2 Surface roughness See Figure 1. Values apply before silver plating. 3.3 Material Heat resisting steel FE-PA2601 (A286): See EN 2399. 1) Minimum tensile strength of the material at ambient temperature. 2) Maximum temperature tha

21、t the bolt can withstand without continuous change in its original characteristics, after return to ambient temperature. The maximum temperature is determined by the surface treatment. 3) Published as ASD Prestandard at the date of publication of this standard. BS EN 3614:2009EN 3614:2009 (E) 5 3.4

22、Surface coating Silver coat all over: See EN 2786, category A, coating thickness 3 m to 6 m on the thread flanks measured at the pitch diameter. Surface roughness measured prior to coating Break sharp edges 0,1 to 0,4. Key 1 Rolled 2 Conforms to ISO 3353-1 3 Thread 4 Thread pitch diameter 5 Shape in

23、 this area at manufacturers option 6 6 places 7 Marking Figure 1 Table 1 Diameter code Thread a D E F G H K R S T max. min. min. min. min. max. min. max. min. max. min. max. min. tol 050 MJ50,8-4H6H 4,61 4,35 8,7 7,4 7,4 0,5 0,2 3,0 2,7 0,5 0,3 8 7,85 h12 0,25 060 MJ61,0-4H6H 5,48 5,22 10,9 9,3 9,4

24、0,5 0,2 3,5 3,2 0,7 0,5 10 9,78h13 0,30 070 MJ71,0-4H6H 6,48 6,22 12,0 10,2 10,3 0,5 0,2 4,0 3,7 0,7 0,5 11 10,73 0,35 080 MJ81,0-4H6H 7,48 7,22 14,3 12,2 12,3 0,5 0,2 4,5 4,2 0,7 0,5 13 12,73 0,40 aIn accordance with ISO 5855-2. 3,2, 0,8 0,8Rolled BS EN 3614:2009EN 3614:2009 (E) 6 Table 2 Length co

25、de N 0,3 Available lengths Diameter codes 050 060 070 080 W MassaW MassaW MassaW Massamax. min. max. min. max. min. max. min. 008 8 2,1 1,7 2,66 010 10 2,91 2,7 2,2 4,68 2,7 2,2 6,45 2,7 2,2 9,40 012 12 3,16 5,03 6,95 10,07014 14 3,41 5,39 7,45 10,74 016 16 3,66 5,75 7,96 11,41018 18 3,91 6,10 8,46

26、12,09 020 20 4 2,5 4,16 6,46 8,96 12,76022 22 6 4,5 4,41 4 2,5 6,82 9,46 13,43 024 24 8 6,5 4,66 6 4,5 7,17 4 2,5 9,96 14,10026 26 10 8,5 4,91 8 6,5 7,53 6 4,5 10,46 4 2,5 14,77 028 28 12 10,5 5,16 10 8,5 7,88 8 6,5 10,97 6 4,5 15,45 030 30 14 12,5 5,41 12 10,5 8,24 10 8,5 11,47 8 6,5 16,12 032 32 1

27、6 14,5 5,66 14 12,5 8,60 12 10,5 11,97 10 8,5 16,79 034 34 18 16,5 6,91 16 14,5 8,95 14 12,5 12,47 12 10,5 17,46 036 36 20 18,5 6,16 18 16,5 9,31 16 14,5 12,97 14 12,5 18,13 038 38 22 20,5 6,41 20 18,5 9,66 18 16,5 13,47 16 14,5 18,81 040 40 24 22,5 6,66 22 20,5 10,02 20 18,5 13,98 18 16,5 19,48 042

28、 42 26 24,5 6,91 24 22,5 10,38 22 20,5 14,48 20 18,5 20,15 044 44 28 26,5 7,16 26 24,5 10,73 24 22,5 14,98 22 20,5 20,82 046 46 30 28,5 7,41 28 26,5 11,09 26 24,5 15,48 24 22,5 21,50 048 48 32 30,5 7,66 30 28,5 11,45 28 26,5 15,98 26 24,5 22,17 050 50 34 32,5 7,91 32 30,5 11,80 30 28,5 16,48 28 26,5

29、 22,84 052 52 36 34,5 8,16 34 32,5 12,16 32 30,5 16,99 30 28,5 23,51 054 54 38 36,5 8,41 36 34,5 12,51 34 32,5 17,49 32 30,5 24,18 056 56 40 38,5 8,66 38 36,5 12,87 36 34,5 17,99 34 32,5 24,86 058 58 42 40,5 8,90 40 38,5 13,23 38 36,5 18,49 36 34,5 25,53 060 60 44 42,5 9,15 42 40,5 13,58 40 38,5 18,

30、99 38 36,5 26,20 062 62 46 44,5 9,40 44 42,5 13,94 42 40,5 19,49 40 38,5 26,87 064 64 48 46,5 9,65 46 44,5 14,29 44 42,5 20,00 42 40,5 27,55 066 66 50 48,5 9,90 48 46,5 14,65 46 44,5 20,50 44 42,5 28,22 068 68 52 50,2 10,15 50 48,5 15,01 48 46,5 21,00 46 44,5 28,29 070 70 54 52,5 10,40 52 50,5 15,36

31、 50 48,5 21,50 48 46,5 29,56 continued BS EN 3614:2009EN 3614:2009 (E) 7 Table 2 (concluded) Length code N 0,3 Available lengths Diameter codes 050 060 070 080 W MassaW MassaW MassaW Massamax. min. max. min. max. min. max. min. 072 72 54 52,5 15,72 52 50,5 22,00 50 48,5 30,23 074 74 56 54,5 16,07 54

32、 52,5 22,50 52 50,5 30,91 076 76 58 56,5 16,43 56 54,5 23,01 54 52,5 31,58 078 78 60 58,5 16,79 58 56,5 23,51 56 54,5 32,25 080 80 62 60,5 17,14 60 58,5 24,01 58 56,5 32,92 082 82 64 62,5 17,50 62 60,5 24,51 60 58,6 33,59 084 84 66 64,5 17,86 64 62,5 25,01 62 60,5 34,27 086 86 66 64,5 25,52 64 62,5

33、34,94 088 88 68 66,5 26,02 66 64,5 35,61 090 90 70 68,5 26,52 68 66,5 36,28 092 92 72 70,5 27,02 70 68,8 36,96 094 94 74 72,5 27,52 72 70,5 37,63 096 96 76 74,5 28,02 74 72,5 38,30 098 98 78 76,5 28,52 76 74,5 38,97 100 100 78 76,5 39,64 104 104 82 80,5 40,99 108 108 86 84,5 42,33 112 112 90 88,5 43

34、,68 116 116 120 120 124 124 128 128 132 132 136 136 140 140 144 144 148 148 152 152 156 156 160 160 164 164 168 168 aMasses: kg/1 000 pieces. BS EN 3614:2009EN 3614:2009 (E) 8 4 Designation EXAMPLE Description block BOLT Identity block EN3614-060-030 Number of this standard Diameter code (see Table

35、1) Length code (see Table 2) NOTE If necessary the originator code I9005 shall be placed between the description block and the identity block. 5 Marking EN 2424, category A, as place indicated in Figure 1. 6 Technical specification See EN 2576. BS EN 3614:2009This page has been intentionally left bl

36、ank BS EN3614:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternat

37、ional level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would b

38、e grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual

39、updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: Yo

40、u may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI prov

41、ides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)

42、20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)2

43、0 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publicati

44、ons of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission f

45、rom BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: