BS EN 3645-001-2015 Aerospace series Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175C or 200C continuous Technical specification.pdf

1、BSI Standards PublicationBS EN 3645-001:2015Aerospace series Connectors, electrical, circular,scoop-proof, triple startthreaded coupling, operatingtemperature 175 C or 200 CcontinuousPart 001: Technical specificationBS EN 3645-001:2015 BRITISH STANDARDNational forewordThis British Standard is the UK

2、 implementation of EN 3645-001:2015.It supersedes BS EN 3645-001:2013 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on r

3、equest to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 88563 1ICS 49.060Compliance with a British St

4、andard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2015.Amendments issued since publicationDate Text affectedBS EN 3645-001:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3645-

5、001 May 2015 ICS 49.060 Supersedes EN 3645-001:2013English Version Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 001: Technical specification Srie arospatiale - Connecteurs lectriques circulair

6、es, contacts protgs, accouplement par filetage, pas rapide trois filets, temprature dutilisation 175 C ou 200 C continu - Partie 001 : Spcification technique Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschtzt, dreigngige Gewinde-Schnellkupplung, Betriebstemperatur 175 C oder 200 C

7、 konstant - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 14 February 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

8、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language

9、 made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, E

10、stonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR S

11、TANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3645-001:2015 EBS EN 3645-001:2015EN

12、 3645-001:2015 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Description .6 5 Design .7 6 Definition drawings and masses 8 7 Tests . 64 8 Quality assurance . 79 9 Designation and marking . 95 10 Delivery conditions . 95 11 Packaging 96

13、 12 Storage . 96 BS EN 3645-001:2015EN 3645-001:2015 (E) 3 Foreword This document (EN 3645-001:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, t

14、his Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at th

15、e latest by November 2015, and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any

16、or all such patent rights. This document supersedes EN 3645-001:2013. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark

17、, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3645-001:20

18、15EN 3645-001:2015 (E) 4 Introduction This family of connectors is derived from MIL-DTL-38999 series III, with which it is intermateable and interchangeable. It is particularly suitable for use in zones of severe environmental conditions on board aircraft, applying EN 2282. These connectors are dist

19、inguishable from MIL-DTL-38999 by: A compatibility with size 8 power and quadrax contacts; Self-extinguishing materials; Compatibility with reduced diameter cables; Additional reinforced fuel resistant insert type; Additional insert with grounded cavities. BS EN 3645-001:2015EN 3645-001:2015 (E) 5 1

20、 Scope This European Standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular connectors, fire-resistant, intended for use in a temperature range from 65 C to 175 C

21、continuous or 200 C continuous according to the classes. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the lates

22、t edition of the referenced document (including any amendments) applies. EN 2267-002, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 260 C Part 002: General EN 2282, Aerospace series Characteristics of aircraft electrical supplies EN 2346, Aerospace

23、series Fire resistant electrical cables Dimensions, conductor resistance and mass EN 2424, Aerospace series Marking of aerospace products EN 2591-100 (all parts), Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 3197, Aerospace series Design and instal

24、lation of aircraft electrical and optical interconnection systems EN 3645-002, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements EN 3909, Aero

25、space series Test fluids for electric components and sub-assemblies EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts ISO 68-1, ISO general purpose screw threads Basic profile Part 1: Metric screw threads ISO 261, ISO general-purpose metric scr

26、ew threads General plan ISO 262, ISO general-purpose metric screw threads Selected sizes for screws, bolts and nuts ISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limit of sizes for general purpose external and internal screw threads Medium quality ISO 4524-1, Metallic coatin

27、gs Test methods for electrodeposited gold and gold alloy coatings Part 1: Determination of coating thickness MIL-DTL-38999K, Connectors, electrical, circular, miniature, high density, quick disconnect (bayonet, threaded, and breech coupling), environment resistant, removable crimp and hermetic solde

28、r contacts, general specification for 1)1) Published by: DoD National (US) Mil. Department of Defense http:/www.defenselink.mil/. BS EN 3645-001:2015EN 3645-001:2015 (E) 6 MIL-HDBK-454, General guidelines for electronic equipment 1)MIL-STD-1373, Screw-thread, modified, 60, stub, double 1)MIL-STD-156

29、0B, Department of Defense interface standard: insert arrangements for 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2591-100 apply. 4 Description 4.1 General Different variants of materials, housings and contact arrangements are provided according

30、 to the classes depending on the service conditions. The pair of connectors is characterized: by shell to shell bottoming; by its triple threaded and self-locking coupling system; by plugs with shielding ring providing protection against radioelectrical interference; by the scoop-proof shells. These

31、 connectors use the following contacts: crimped sizes 22, 20, 16, 12, 10 and 8; soldered (model Y) sizes 22, 20, 16 and 12; coaxial crimped or soldered sizes 16, 12 and 8; For arrangements comprising the letter G or Q, all contacts are grounded to the receptacle housing triaxial crimped or soldered

32、size 8; quadrax crimped size 8. The receptacles and plugs contain either male contacts or female contacts. The contacts fitted in the class Y receptacles are exclusively of the male solder type. The connectors are polarized by means of keyways and keys; polarization shall be obtained before the male

33、 contacts enter the insert of the female contacts and before the coupling ring is engaged. The position of the keying arrangement is given in Table 5. The visual check of coupling is obtained by masking of a red colour band on the receptacle. 4.2 Receptacle The receptacle housing may be attached: sq

34、uare flange; nut, with sealing by O-ring at the attachment; round soldered or brazed flange for class Y connectors. BS EN 3645-001:2015EN 3645-001:2015 (E) 7 4.3 Plug The coupling ring is permanently fitted to the plug and allows coupling and uncoupling of the connectors. The lanyard release version

35、 may also be uncoupled by pulling on the lanyard. The plug is fitted with a self-locking mechanism and a grounding spring device ensuring electrical continuity between the coupled connector housings. An anti-decoupling device shall be provided to maintain complete coupling. 4.4 Materials and surface

36、 treatment 4.4.1 General When dissimilar metals are in close contact, adequate protection against corrosion shall be used for the electromotive force of the cell not to exceed 0,25 V (see EN 3197). 4.4.2 Housing The material of the housings for the connectors and fittings may be either aluminium all

37、oy, passivated stainless steel or composite. Aluminium alloy and composite shall be plated as defined by the class (composite coupling rings and Hex nut may be unplated) (see EN 3645-002). 4.4.3 Contacts Unless otherwise specified, the non-removable contacts shall be in ferrous alloy for class Y and

38、 in copper alloy for the other classes. They shall be gold-plated on an appropriate undercoat. Selective protection is authorized provided that it is sufficient to ensure that the specified performance is achieved. Measurement of the thickness of the protective plating shall be effected in accordanc

39、e with ISO 4524-1. For removable contacts, see EN 3645-002. 4.4.4 Non-metallic materials The materials used for insert, seals and grommets shall have a hardness and mechanical and electrical characteristics consistent with the required use. 5 Design 5.1 Housings The connector housings shall be one-p

40、iece. They shall contain teeth at the rear over their entire periphery and shall accommodate the rear accessories. The receptacle shall be fitted with a seal for sealing the coupled housings. Jam-nut receptacles shall contain an O-ring seal. The nut shall have holes for the passage of locking wire.

41、During coupling the grounding spring shall be engaged a minimum of 1,02 mm in the receptacle before the contacts engage. Except for the triple start threads, which shall conform to standard MIL-STD-1373, threads shall conform to standards ISO 68-1, ISO 261, ISO 262 and ISO 965-2. BS EN 3645-001:2015

42、EN 3645-001:2015 (E) 8 The coupling ring shall be designed so that the male and female contacts engage when it is turned in a clockwise direction and disengage when turned anticlockwise. The coupling threads may have a lubricant applied during manufacture. Full locking of the connectors shall occur

43、at about 360. On completion of tightening of the coupling ring, mechanical contact shall exist between the receptacle and plug housings. A red band shall be located on the receptacle so as to be visible when unmated and fully covered when completely mated. The receptacle has five keyways which engag

44、e with corresponding keys on the plug. The major key is fixed and is wider than the others. Polarization is ensured by the different positions which the minor keys may take. The position of the insert is fixed relative to the major key. A blue-coloured band indicating that the crimped contacts of th

45、e connectors are rear-releasable shall be provided: in front of the flange on square flange receptacles; on the flange of jam-nut receptacles; on the coupling ring of plugs. This band shall be positioned so that at least one is visible when the connectors are fitted and when they are mated or unmate

46、d. Hermetic receptacles do not require blue colour band. 5.2 Inserts The insert for contacts shall be non-removable; it shall be mechanically held in the housing. Sealing shall be provided between the housing and insert. The front face of the insert shall be such that sealing is ensured when the con

47、nectors are coupled. The interfacial seal of the insert of the male contacts shall be bonded on the hard insert. The grommet shall permit sealing for all cable diameters indicated in EN 3645-002 and shall not be removable. The mechanical contacts retention system shall be integrated in the hard inse

48、rt. The design of non-hermetic connectors shall permit individual installation of the contacts without removal of the insert or grommet. Fitting and removal of the contacts shall be from the rear with the tools specified in the contact product standards. Contact position identification shall be perm

49、anent and contrasted on the front face of the insert or the interfacial seal and on the rear face of the grommet as indicated in 6.6. The marking shall not be recessed or raised on the surfaces providing a seal. 6 Definition drawings and masses 6.1 General The general dimensions and the masses of receptacles, plugs and protective covers are given in the product standards. BS EN 3645-001:2015EN 3645-001:2015 (E) 9 6.2 Receptacle mating dimensions The mating