BS EN 3646-005-2017 Aerospace series Connectors electrical circular bayonet coupling operating temperature 175 C or 200 C continuous Receptacle hermetic square flange mounting Prod.pdf

1、BS EN 3646-005:2017Aerospace series Connectors, electrical, circular,bayonet coupling, operatingtemperature 175 C or 200 CcontinuousPart 005: Receptacle, hermetic, squareflange mounting Product standardBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 3646-005:20

2、17 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 3646-005:2017.It supersedes BS EN 3646-005:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list

3、 of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2017. Published by BSI Standards Limi

4、ted 2017ISBN 978 0 580 95145 9ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate Text affec

5、tedBS EN 3646-005:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3646-005 March 2017 ICS 49.060 Supersedes EN 3646-005:2006English Version Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous - Part 005: Receptacle, hermetic

6、, square flange mounting - Product standard Srie arospatiale - Connecteurs lectriques circulaires accouplement par baonnettes, temprature dutilisation 175 C ou 200 C continu - Partie 005: Embase hermtique fixation par collerette carre - Norme de produit Luft- und Raumfahrt - Elektrische Rundsteckver

7、binder mit Bajonettkupplung, Betriebstemperatur 175 C oder 200 C konstant - Teil 005: Hermetischer fester Steckverbinder mit quadratischem Montageflansch - Produktnorm This European Standard was approved by CEN on 26 October 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulat

8、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

9、 This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN

10、members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po

11、rtugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitatio

12、n in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3646-005:2017 EBS EN 3646-005:2017EN 3646-005:2017 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 4 5 Designation . 7 6 Marking .

13、 7 7 Technical specification . 8 BS EN 3646-005:2017EN 3646-005:2017 (E) 3 European foreword This document (EN 3646-005:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rul

14、es of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an ident

15、ical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be h

16、eld responsible for identifying any or all such patent rights. This document supersedes EN 3646-005:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croa

17、tia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turk

18、ey and the United Kingdom. BS EN 3646-005:2017EN 3646-005:2017 (E) 4 1 Scope This European Standard defines the characteristics of hermetic square flange receptacles in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of 65 C to 175 C or 200 C co

19、ntinuous. It applies to models defined in Table 3. For plugs and protective covers see EN 3646-008 and EN 3646-009 respectively. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refer

20、ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3646-001, Aerospace series Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous Part 001: Technical speci

21、fication EN 3646-002, Aerospace series Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements EN 3646-008, Aerospace series Connectors, electrical, circular, bayonet coupling, operating tempe

22、rature 175 C or 200 C continuous Part 008: Plug Product standard EN 3646-009, Aerospace series Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous Part 009: Protective cover for receptacle Product standard 3 Terms and definitions For the purposes of th

23、is document, the terms and definitions given in EN 3646-001 apply. 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. Dimensions and tolerances are in millimetres, they apply after surface treatment. Interface mating dimensions, see EN 3646-001. BS EN 3646-005:2017EN 3646-0

24、05:2017 (E) 5 Key 1 2,21 shells 08 to 18 5,38 shells 20 to 24 2 Panel 3 Polarizing strip optional colour 4 Four holes diameter M a Maximum thickness of the support and the fixing screw heads for mounting the connector from the rear of the panel b See EN 3646-001, Figure 1 and Figure 3, for reference

25、s A and B. Figure 1 Table 1 Housing size L M N S T X Z Mass 0 0,30 g max. 0,15 0,55 max. max. 08 8,40 3,15 12,65 15,10 21,03 1,63 0,86 14,30 12 10 18,26 24,23 17,10 15 12 20,62 26,59 19,90 20 14 23,01 28,98 23,05 24 16 24,61 31,34 26,25 30 18 26,97 33,73 29,40 36 20 9,60 14,25 29,36 36,91 1,93 0,58

26、31,80 43 22 31,75 40,10 35,00 52 24 3,73 15,05 34,92 43,27 38,20 60 BS EN 3646-005:2017EN 3646-005:2017 (E) 6 4.2 Panel cut-out Recommended panel cut-out dimensions: see Figure 2 and Table 2. Dimensions and tolerances are in millimetres. Key 1 Four holes diameter C Figure 2 Table 2 Housing size A B

27、C D + 0,25 0 0,15 min. 08 14,40 15,10 3,15 32 10 17,59 18,26 35 12 22,60 20,62 38 14 25,52 23,01 41 16 28,70 24,61 45 18 31,87 26,97 47 20 35,05 29,36 51 22 38,22 31,75 53 24 41,40 34,92 3,73 57 4.3 Material and surface treatment See Table 3. 4.4 Main general characteristics See EN 3646-002. BS EN 3

28、646-005:2017EN 3646-005:2017 (E) 7 4.5 Possible combinations of plugs and receptacles See EN 3646-002. 5 Designation EXAMPLE Description block CONNECTOR, ELECTRICAL, RECEPTACLE Identity block EN3646Y01006MN Number of the basic standard Model (see Table 3) Hermetic square flange receptacle (see EN 36

29、46-002) Housing size and contacts arrangement (see EN 3646-002) Type of contact M = male Polarization (see EN 3646-002) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. Table 3 Connectors models Model Description Y Hermetic receptacle with housi

30、ng (shell) in passivated stainless steel, solder contacts Maximum operating temperature 200 C continuous 6 Marking Unless there are other specific contractual requirements, the marking shall include. 6.1 Marking on the product the manufacturers part number corresponding to the identity block as defi

31、ned in Clause 5; the date of manufacture (year, week); the manufacturers name or trade mark. BS EN 3646-005:2017EN 3646-005:2017 (E) 8 6.2 Marking on the individual packaging the identity block as defined in Clause 5; the corresponding manufacturers part number; the date of manufacture (year, week);

32、 the manufacturers name or trade mark. 7 Technical specification See EN 3646-001. This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Sta

33、ndards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledg

34、e embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that yo

35、ur organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standar

36、ds, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including

37、British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you

38、 may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purch

39、ased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any o

40、ne time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. T

41、his includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications con

42、tact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted Europe

43、an and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming

44、a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a

45、Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur Briti

46、sh Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful Cont

47、actsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20