BS EN 3660-010-2010 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Cable outlet style K straight shielded sealed for h.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 3660-010:2010Aerospace series Cableoutlet accessories for circularand rectangular electrical andoptical connectorsPart 010: Cable outlet, style K, straight,shielded, sealed

2、, for heat shrinkable boot Product standardBS EN 3660-010:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 3660-010:2010.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology

3、.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 53265 8ICS 49.060Compliance with a Britis

4、h Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2010Amendments issued since publicationDate Text affectedBS EN 3660-010:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 36

5、60-010 June 2010 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 010: Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot - Product standard Srie arospatiale - Accessoires arrire pour

6、 connecteurs circulaires et rectangulaires lectriques et optiques - Partie 010: Raccord, type K, droit, blind, tanche, pour manchon thermortractable - Norme de produit Luft- und Ramfahrt - Endgehuse fr Elektrische und optische rund- und rechtecksteckverbinder - Teil 010: Endgehuse, Bauform K, gerade

7、, Ausfrung, Schirmanschlu, abgedichtet, fr wrmeschrumpfende Bauteile - Produktnorm This European Standard was approved by CEN on 19 May 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nat

8、ional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in

9、 any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic,

10、 Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORM

11、ALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-010:2010: EBS EN 3660-010:2010EN 3660-010:2010 (E) 2 Contents Page Foreword 31

12、Scope 42 Normative references 43 Terms and definitions .44 Characteristics .45 Identification 156 Marking 157 Technical specification 15BS EN 3660-010:2010EN 3660-010:2010 (E) 3 Foreword This document (EN 3660-010:2010) has been prepared by the Aerospace and Defence Industries Association of Europe

13、- Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standar

14、d shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of t

15、his document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European St

16、andard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the Unit

17、ed Kingdom. BS EN 3660-010:2010EN 3660-010:2010 (E) 4 1 Scope This European Standard defines a range of cable outlets, style K, straight, shielded, sealed for heat shrinkable boots, for use under the following conditions. Associated electrical connector(s) : EN 3660-002 Temperature range Class N : 6

18、5 C to 200 C Class W : 65 C to 175 C Class K : 65 C to 260 C 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (

19、including any amendments) applies. EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification EN 36

20、60-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards EN 3660-033, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 033: Band Product standard

21、1)SAE AS85049, Connector accessories, electrical general specification 2)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass 4.1.1 General For interface dimensions see 4.2. * All parts quoted in th

22、is standard. 1) In preparation at the date of publication of this standard. 2) Published by: Society of Automotive Engineers (SAE), (www.sae.org). BS EN 3660-010:2010EN 3660-010:2010 (E) 5 4.1.2 Cable outlet variant A For screen attachment with banding band, see EN 3660-033. Classes N, W and K. For

23、dimensions and mass, see Figure 1 and Tables 1, 2 and 3. Key 1 Thread A 2 Knurl style, manufacturers option 3 Three equally spaced holes for max. 0,51 safety wire 4 Manufacturers mark and part number NOTE On both variants, coupling nut to be captive on cable outlet body but free to rotate. Figure 1

24、BS EN 3660-010:2010EN 3660-010:2010 (E) 6 4.1.3 Cable outlet variant B Screen pre-terminated by manufacturer. Classes N and W only. For dimensions and mass, see Figure 2 and Tables 1, 4 and 5. Key 1 Thread A 2 Manufacturers mark and part number 3 Knurl style, manufacturers option 4 Screen/shield 5 S

25、creen termination device 6 Three equally spaced holes for max. 0,51 safety wire Figure 2 BS EN 3660-010:2010EN 3660-010:2010 (E) 7 Table 1 Dimensions common to both variants Dimensions in millimetres Shell size A B C Thread Class 2B inches 0 1,14 0 0,56 08 0.500-20 UNF 15,677,75 10 0.625-24 UNEF 18,

26、64 12 0.750-20 UNEF 21,7914 0.875-20 UNEF 24,99 16 1.000-20 UNEF 28,2418 1.063-18 UNEF 30,94 20 1.188-18 UNEF 34,1622 1.312-18 UNEF 37,29 24 1.438-18 UNEF 40,4628 1.750-18 UNS 50,01 Table 2 Maximum cable entry codes and mass for variant A cable outlets Shell size Cable entry code Mass Classes N and

27、W Class K max. g max. 08 B 7,5 19,5 10 D 9,5 26,012 F 11,5 31,0 14 G 16 J 18 K 16,0 43,5 20 M 21,0 58,022 P 23,5 64,5 24 R 26,50 72,528 T BS EN 3660-010:2010EN 3660-010:2010 (E) 8 Table 3 Cable entry dimensions for variant A cable outlet Dimensions in millimetres Cable entry code D E F 0,51 0,51 max

28、. A 4,75 7,92 11,10B 6,35 9,52 12,70 C 7,92 11,12 14,30D 9,52 12,70 15,88 E 11,12 14,30 17,50F 12,70 15,88 19,05 G 14,30 17,50 20,65H 15,88 19,05 22,23 J 17,50 20,65 23,80K 19,05 22,23 25,40 L 20,65 23,83 27,00M 22,23 25,40 30,16 N 23,83 27,00 31,75P 25,40 28,58 33,34 R 28,85 31,75 36,51S 31,75 34,9

29、3 42,84 T 34,93 38,10 46,02Table 4 Maximum cable entry codes and mass for variant B cable outlet Shell size Cable entry code Mass a Classes N and W max. g max. 08 B 6,510 D 8,5 12 F 10,514 G 11,75 16 J 13,518 K 15,0 20 M 19,522 P 21,75 24 R 26,028 T 45,5 aThe mass quoted includes the device used for

30、 securing the screen to the cable outlet plus the specified length of screen and is for the maximum entry size. BS EN 3660-010:2010EN 3660-010:2010 (E) 9 Table 5 Cable entry dimensions for variant B cable outlet Dimensions in millimetres Cable entry code D E 0,51 0,51 A 9,58 4,75B 14,22 6,35 C 16,00

31、 7,92D 17,53 9,52 E 19,05 11,12F 20,83 12,70 G 22,61 14,30H 24,13 15,88 J 25,91 17,50K 28,45 19,05 L 30,48 20,65M 32,26 22,23 N 32,00 23,83P 34,80 25,40 R 37,34 28,58S 40,64 31,75 T 43,43 34,934.2 Interface dimensions 4.2.1 Associated connection See EN 3660-002. 4.2.2 Standard AS 85049 interface For

32、 classes N and W. See Figure 3 and Table 6. BS EN 3660-010:2010EN 3660-010:2010 (E) 10 Key 1 4,95 mm min. penetration of Z diameter measured from front of teeth 2 N number of teeth, see Table 6. Figure 3 Table 6 For standard AS85049 interface Dimensions in millimetres Shell size W X Y Z N + 0,64 0 0

33、 0,38 + 0,38 0 0 0,25 Number of teeth 08 12,74 9,14 7,59 6,86 12 10 15,88 12,55 11,00 9,53 15 12 19,05 15,49 13,94 12,98 21 14 22,23 18,67 17,12 14,86 24 16 25,40 21,84 20,29 18,03 30 18 26,97 23,27 22,07 20,04 33 20 30,18 26,44 25,25 23,22 36 22 33,32 29,62 28,42 26,39 39 24 36,53 32,79 31,60 29,31

34、 42 28 44,45 38,40 37,31 35,28 54 4.2.3 Modified AS85049 interface For class K only. See Figure 4 and Table 7. BS EN 3660-010:2010EN 3660-010:2010 (E) 11 Figure 4 Table 7 For modified AS85049 interface Dimensions in millimetres Shell size F G H J N Ref. + 0,13 0 + 0,18 0 0 0,25 Number of teeth 08 11

35、,10 9,17 6,68 6,86 12 10 14,53 11,10 9,35 9,53 15 12 17,45 14,83 12,62 12,80 21 14 20,62 17,22 15,98 14,86 24 16 23,80 20,55 17,73 17,93 30 18 25,20 22,48 21,46 20,04 33 20 28,37 25,53 25,02 23,22 36 22 31,55 29,01 27,61 26,39 39 24 34,72 32,46 31,62 29,31 42 28 42,75 38,91 37,97 35,28 54 4.3 Materi

36、al and finish Material/finish Class N : Aluminium/electroless nickel plated Material/finish Class W : Aluminium/olive drab cadmium plated Material/finish Class K : Stainless steel/passivated These descriptions do not apply to EN 3660-033. For screens see Table 11. BS EN 3660-010:2010EN 3660-010:2010

37、 (E) 12 4.4 Assembly torque These torque values are intended for installation use only. Table 8 Shell size Torque Nm 0,5 08 4,5 10 12 14 16 18 20 9,0 22 24 28 10,0 4.5 Coupling thread strength torques These torque values are for test purposes, see EN 2591-420 and Table 9. Table 9 Shell size Torque N

38、m 0,5 08 5,5 10 12 14 16 18 20 11,0 22 24 28 12,0BS EN 3660-010:2010EN 3660-010:2010 (E) 13 4.6 Tests Test details to be in accordance with Table 10, EN 3660-001 and EN 2591-100. Qualification to be in accordance with EN 3660-001. Table 10 EN 2591- Designation of the test Not applicable Applicable s

39、ee EN 3660-001Details 101 Visual examination X 102 Examination of dimensions and mass X See 4.1. 205 Housing (shell) electrical continuity X Class F: 2,5 m; Class W: 5 m; Class K: 10 m. 212 Surface transfer impedance (from 100 MHz to 1 GHz) a X Method 2. Frequency Minimum attenuation Classes F, W an

40、d K MHz dB 100 90/80 200 88/75 300 88/75 400 87/71 800 85/66 1 000 85/65 301 Endurance at temperature X Classes N and W only Class K, see b. 305 Rapid change of temperature X ClassesTATBT1+ 5 0 0 5 C C min. N 200 65 30 W 175 65 30 K 260 65 30 continued BS EN 3660-010:2010EN 3660-010:2010 (E) 14 Tabl

41、e 8 (concluded) EN 2591- Designation of the test Not applicable Applicable see EN 3660-001Details 306 Mould growth X See EN 3660-001, 10.2.3. 307 Salt mist X Duration: Class N 48 h Class W 500 h Class K 500 h 308 Sand and dust X 314 Immersion at low air pressure X 315 Fluid resistance X 316 Ozone re

42、sistance X 317 Flammability X 318 Fire-resistance X 402 Shock X Method A. Severity: 300 No. of shocks: One in each direction in 3 perpendicular axis Visual examination only No visual damage 403 Vibration X Method B. Figure 3 and Table 2 Level J Duration: 8 hours at ambient temperature Visual examina

43、tion only. No visual damage. 406 Mechanical endurance 30 cycles 408 Mating and unmating X 420 Mechanical strength of rear accessories X Phase A only. Torque as specified in Table 9. 422 Locking wire hole strength X 513 Magnetic permeability X Not fitted to a connector max. values Classes N and W : 2

44、,0 Class K : 2,5 a1 GHz to 10 GHz under consideration. bClass K to be subjected to Test EN 2591-301 only where non-metallic components are used. BS EN 3660-010:2010EN 3660-010:2010 (E) 15 5 Identification EXAMPLE 1 Description block CABLE OUTLET Identity block EN3660-010XXXXX Number of this standard

45、 Material/Finish For variant B, see Table 11 For variant A, see 4.3 Shell size Entry size (see Tables 3 and 5) Screen type for variant B only (see Table 12) EXAMPLE 2 EN3660-010C08AN Cable outlet, style K, straight, shielded, sealed, aluminium, olive drab cadmium, cable outlet variant B, shell size

46、08, entry code A with a pre-terminated nickel plated copper screen. Table 11 Identification code for material, finish and screen type for variant B only Code Class a Screen code b A N T B N N C W T D W N aSee 4.3. bSee Table 12. Table 12 Identification code of screen type for variant B only Code Scr

47、een and plating T Tin plated copper N Nickel plated copper 6 Marking See Figures 1 and 2 and EN 3660-001. 7 Technical specification See EN 3660-001. This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand o

48、ther standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL U

49、KTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British