BS EN 3660-066-2017 Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet style K 90 for heat shrinkable boot shield.pdf

1、Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectorsPart 066: Cable outlet, style K, 90, for heat shrinkable boot, shielded, sealed - Product standardBS EN 3660-066:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 1

2、5:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-066 September 2017 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 066: Cable outlet, style K, 90, for heat shrinkable boot, shielded, sealed - P

3、roduct standard Srie arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 066 : Raccord, type K, coud 90, blind, tanche, pour manchon thermortractable - Norme de produit Luft- und Raumfahrt - Endgehuse fr elektrische und optische Rund- und R

4、echtecksteckverbinder - Teil 066: Endgehuse, Bauform K, 90, fr wrmeschrumpfende Bauteile, Schirmanschlu, abgedichtet, selbstsichernd -Produktnorm This European Standard was approved by CEN on 23 January 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t

5、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standar

6、d exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nation

7、al standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbi

8、a, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by a

9、ny means reserved worldwide for CEN national Members. Ref. No. EN 3660-066:2017 ENational forewordThis British Standard is the UK implementation of EN 3660-066:2017.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic techno

10、logy.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI S

11、tandards Limited 2017ISBN 978 0 580 96070 3ICS 49.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publica

12、tionDate Text affectedBRITISH STANDARDBS EN 3660066:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-066 September 2017 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 066: Cable outlet, style K

13、, 90, for heat shrinkable boot, shielded, sealed - Product standard Srie arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 066 : Raccord, type K, coud 90, blind, tanche, pour manchon thermortractable - Norme de produit Luft- und Raumfahrt

14、 - Endgehuse fr elektrische und optische Rund- und Rechtecksteckverbinder - Teil 066: Endgehuse, Bauform K, 90, fr wrmeschrumpfende Bauteile, Schirmanschlu, abgedichtet, selbstsichernd -Produktnorm This European Standard was approved by CEN on 23 January 2017. CEN members are bound to comply with th

15、e CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Managemen

16、t Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status

17、as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, N

18、etherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017

19、 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-066:2017 EBS EN 3660066:2017EN 3660-066:2017 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 5 4 Characteristics . 5 5 Desig

20、nation . 18 6 Marking . 18 7 Technical specification . 18 BS EN 3660066:2017EN 3660-066:2017 (E) 3 European foreword This document (EN 3660-066:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in

21、 accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by

22、 publication of an identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be

23、held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto

24、nia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3660066:2

25、017EN 3660-066:2017 (E) 4 1 Scope This European Standard defines a range of cable outlets, style K, 90, shielded, sealed for heat shrinkable boot, for use with memory metal rings under the following conditions. The mating connectors are listed in EN 3660-002. Temperature range, Class N : 65 C to 200

26、 C Class K : 65 C to 200 C Class W : 65 C to 175 C Class T : 65 C to 175 C (Nickel PTFE plating) Class Z : 65 C to 175 C (Zinc nickel plating) Associated electrical accessories : EN 3660-034 memory metal rings (for shield termination backshells). These cable outlets are designed for termination of o

27、verall shielding braid or individual cable shields. They accommodate/permit the termination of heat shrinkable boots. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated re

28、ferences, the latest edition of the referenced document (including any amendments) applies. EN 2591-100*, Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General EN 2997 (series), Aerospace series - Connectors, electrical, circular, coupled by threaded rin

29、g, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 200 C continuous, 260 C peak EN 3646 (series), Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous EN 3660-001, Aerospace series - Cable outl

30、et accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification EN 3660-002, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 002: Index of product standards *All its parts quoted in th

31、is European Standard. BS EN 3660066:2017EN 3660-066:2017 (E) 5 EN 3660-034, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 034: Memory metal rings, style Z, for the attachment of screens - Product standard EN 60529, Degrees of protec

32、tion provided by enclosures (IP Code) (IEC 60529) AS85049, Connector accessories, electrical general specification for- 1)A-A-59569, Braid, wire (copper, tin-coated, silver-coated, or nickel coated, tubular or flat) 3 Terms and definitions For the purposes of this document, the terms and definitions

33、 given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figures 1 and 2 and Tables 1, 2 and 3. For cable entry dimensions, see 4.2. Dimensions are in millimetres. 1) Published by: SAE National (US) Society of Automotive Engineers. (http:/ www.sae.org/) BS

34、EN 3660066:2017EN 3660-066:2017 (E) 6 Key 1 Thread C 2 Marking 3 Three equally spaced holes 1 mm diameter for locking wire 4 Straight knurl, pitch manufacturers option 5 EN 3660-034 memory metal ring NOTE Valley of start tooth to be at vertical centre line of accessory at position shown: Within 3 fo

35、r shell sizes 08-12, Within 2 for shell sizes 14-18, Within 1 for shell sizes 20 and larger. Cable outlets may be manufactured as cast, fabricated or machined (manufacturers option). No sharp edges/burrs permissible on internal surfaces/joints. Surface finish of on all internal surfaces. Figure 1 Ca

36、ble outlet 1,6 m max. BS EN 3660066:2017EN 3660-066:2017 (E) 7 Table 1 Fixed dimensions of shell Dimensions in millimetres Shell size Entry size Cable dia. (ref.) C Thread A B D E W max. max. max. max. min. max. max. 08 04 5,4 0,500-20UNEF 27,9 19,1 6,35 14,5 28,4 10 06 8,1 0,625-24UNEF 29,5 21,6 9,

37、53 14,5 31,8 12 08 10,8 0,750-20UNEF 31,0 25,4 12,70 14,5 35,1 14 08 10,8 0,875-20UNEF 32,5 29,2 12,70 14,5 35,1 16 10 13,5 1,000-20UNEF 34,3 31,8 15,87 14,5 38,1 18 12 16,2 1,062-18UNEF 35,6 35,6 19,05 14,5 41,1 20 14 18,9 1,188-18UNEF 37,1 38,1 22,23 14,5 44,5 22 16 21,6 1,312-18UNEF 38,9 41,9 25,

38、40 14,5 47,5 24 18 24,3 1,438-18UNEF 40,4 44,5 28,57 14,5 50,8 Table 2 Mass for classes K, N, W, T and Z Mass in grams Shell size code End-fitting size code Classes 04 05 06 07 08 10 12 14 16 18 20 08 11,20 N, T, W, Z 31,10 K 10 13,10 14,20 16,00 N, T, W, Z 36,30 39,35 44,32 K 12 15,10 17,65 21,15 N

39、, W, Z, 41,85 48,90 58,60 K 14 17,30 19,95 22,85 N, T, W, Z 47,95 55,26 63,30 K 16 19,80 22,60 25,50 N, T, W, Z 54,85 62,60 70,65 K 18 24,50 27,40 34,50 N, T, W, Z 67,90 75,90 95,60 K 20 34,75 42,10 47,10 N, T, W, Z 96,30 116,65 130,50 K 22 42,95 51,20 N, T, W, Z 119,00 141,85 K 24 50,75 60,30 65,50

40、 N, T, W, Z 140,60 167,10 181,50 K BS EN 3660066:2017EN 3660-066:2017 (E) 8 4.2 Cable entry dimensions See Figure 2 and Table 3. Key 1 See detail section AA for surface dimensions Figure 2 Cable entry BS EN 3660066:2017EN 3660-066:2017 (E) 9 Table 3 Dimensions in millimetres End fitting size code A

41、B C D + 0,25 0,5 min. max. 0,5 + 0,2 0 04 6,4 9,39 9,56 14,0 1,12 05 7,9 10,97 11,13 15,5 1,12 06 9,5 12,57 12,73 17,1 1,12 07 11,1 14,12 14,31 18,7 1,12 08 12,7 15,72 15,91 20,3 1,12 10 15,9 18,84 19,11 23,5 1,12 12 19,1 22,02 22,28 26,7 1,75 14 22,2 25,17 25,46 29,8 1,75 16 25,4 28,34 28,63 33,0 1

42、,75 18 28,6 31,52 31,81 36,2 1,75 20 31,8 34,69 34,98 39,4 1,75 NOTE The cable outlet shall be selected in accordance with the maximum diameter of the cable bundle, see Table 1. 4.3 Associated connectors See EN 3660-002. 4.4 Standard AS85049 interface See Figure 3 and Table 4. All dimensions are in

43、millimetres. BS EN 3660066:2017EN 3660-066:2017 (E) 10 Detail AA (Less accessory nut) Detail B (Less accessory nut) Detail B (Less accessory nut) Optional for accessories made from stainless material. Key 1 Root of tooth on centreline within 2 (applicable to angled accessories only) 2 Thread 3 Depth

44、 of teeth 4 Start of angle 5 Before radius NOTE 1 Minimum penetration of “Z“ diameter measured from front of teeth. NOTE 2 The first thread must be chamfered. NOTE 3 Dimensions are in millimetres. NOTE 4 Angle, manufacturing option to meet performance requirements. a See Note 1. bSee Note 4. Figure

45、3 BS EN 3660066:2017EN 3660-066:2017 (E) 11 Table 4 Dimensions in millimetres Shell size W X Y Z N Number of teeth + 0,25 0 0 0,38 + 0,38 0 0 0,25 08 12,70 9,14 7,59 6,86 12 10 15,88 12,55 11,00 9,53 15 12 19,05 15,49 13,94 12,98 21 14 22,23 18,67 17,12 14,86 24 16 25,40 21,84 20,29 18,03 30 18 26,9

46、7 23,27 22,07 20,04 33 20 30,17 26,44 25,25 23,22 36 22 33,32 29,62 28,42 26,39 39 24 36,53 32,79 31,60 29,31 42 4.5 Material and finish Material/Finish Class N : Aluminium/Nickel plated Material/Finish Class K : Stainless steel/Passivated Material/Finish Class W : Aluminium/Olive drab cadmium plate

47、d Material/Finish Class T : Aluminium (Nickel PTFE plated) Material/Finish Class Z : Aluminium (Zinc nickel plated) 4.6 Assembly torque These torque values are intended for installation use only, see Table 5. BS EN 3660066:2017EN 3660-066:2017 (E) 12 Table 5 Shell size Assembly torque max. Nm Class

48、K Classes N, T, W and Z 08 6,3 6,3 10 8,6 8,6 12 12,2 12,2 14 13,1 13,1 16 13,1 13,1 18 13,1 13,1 20 15,4 15,4 22 15,4 15,4 24 15,4 15,4 4.7 Tests 4.7.1 Tests according to EN 2591-100 Test details to be in accordance with Table 6, EN 3660-001 and EN 2591-100. Qualification to be in accordance with EN 3660-001. BS EN 3660066:2017EN 3660-066:2017 (E) 13 Table 6 (1 of 4) EN 2591- Designation on the test Not applicable Applicable see EN 3660-001 Details 101 Visu