1、BRITISH STANDARDBS EN 3685:2008Aerospace series Bolts in heat resisting steel FE-PA2601 (A286) Classification: 1 100 MPa/650 C Technical specificationICS 49.030.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48
2、g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3685:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 May 2008 BSI 2008ISBN 978 0 580 62888 7National forewordThis British Standard is the UK implementation of EN 3685
3、:2008.The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provis
4、ions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3685 April 2008 ICS 49.030.20 English
5、 Version Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa/650 C - Technical specification Srie arospatiale - Vis en acier rsistant chaud FE-PA26HT (A286) - Classification: 1 100 MPa/650 C - Spcification technique Luft- und Raumfahrt - Schrauben aus hochwa
6、rmfestem Stahl FE-PA2601 (A286) - Klasse: 1 100 MPa/650 C - Technische Lieferbedingungen This European Standard was approved by CEN on 21 December 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the stat
7、us of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A
8、 version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republi
9、c, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NO
10、RMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3685:2008: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms
11、 and definitions .5 4 Certification and quality assurance.6 5 Technical requirements and test method .8 BS EN 3685:20083 Foreword This document (EN 3685:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carri
12、ed out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by
13、 publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CE
14、NELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Den
15、mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3685:20084 1 Scope This standard specifies the technic
16、al, qualification and quality assurance requirements for bolts in material FEPA2601 (A286) of tensile strength class 1 100 MPa at room temperature, maximum test temperature of material 650 C. Primarily for aerospace applications it is applicable to such bolts when referenced on the product standard
17、or definition document. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IS
18、O 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. ISO 3452, Non-destructive testing Penetrant inspection General principles. ISO 4288, Geometrical Product Specifications (GPS) Surface texture: Prof
19、ile method Rules and procedures for the assessment of surface texture. ISO 6508-1, Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T). ISO 7961, Aerospace Bolts Test methods. ISO 9000, Quality management systems Fundamentals and vocabulary. EN 2002
20、-8, Aerospace series Metallic materials Test methods Part 8: Micrographic determination of grain size. 1)EN 3041, Aerospace series Propulsion standard parts Manufacturing process change procedure for qualified parts.2)EN 3761, Aerospace series Heat resisting alloy FE-PA2601 Softened and cold worked
21、Bar for forged fasteners D 50 mm 1 100 MPa Rm 1 300 MPa. 1)EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts. TR 3040-1, Aerospace series Quality Assurance EN aerospace products Part 1: List of approved manufacturers. 3)ASTM E 112-96, Standard
22、Test Methods for Determining Average Grain Size. 4)1) Published as ASD Prestandard at the date of publication of this standard. 2) In preparation at the date of publication this standard. 3) Published as ASD Technical Report at the date of publication of this standard. 4) Published by: American Soci
23、ety for Testing and Materials (ASTM), 1916 Race street, Philadelphia, PA 19103-1187, USA. BS EN 3685:20085 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 production batch quantity of finished parts fabricated by the same process from a singl
24、e material cast (single heat of alloy), having the same basic part number and diameter, heat treated together to the same specified condition and produced as one continuous run 3.2 inspection lot quantity of parts from a single production batch of the same part number which completely defines the pa
25、rts 3.3 Surface discontinuities 3.3.1 crack rupture in the material which may extend in any direction and which may be intercrystalline or transcrystalline in character 3.3.2 seam longitudinal surface defect in the form of an unwelded open fold in the material 3.3.3 lap surface defect caused by fold
26、ing over metal fins or sharp corners and then rolling or forging them into the surface 3.3.4 inclusion non-metallic particles originating from the material making process. They may exist as discrete particles or strings of particles extending longitudinally. 3.4 test temperature ambient temperature,
27、 unless otherwise specified 3.5 simple random sampling the taking of n items from a population of N items in such a way that all possible combinations of n items have the same probability of being chosen 3.6 critical defect a defect that according to judgement and experience, is likely to result in
28、hazardous or unsafe conditions for individuals using, maintaining, or depending upon the considered product, or that is likely to prevent performance of the function of a major end item 3.7 major defect a defect other than critical, that is likely to result in a failure or to reduce materially the u
29、sability of the considered product for its intended purpose BS EN 3685:20086 3.8 minor defect a defect that is not likely to reduce materially the usability of the considered product for its intended purpose, or that is a departure from established specification having little bearing on the effectiv
30、e use or operation of this product 3.9 sampling plan a plan according to which one or more samples are taken in order to obtain information and possibly to reach a decision 3.10 limiting quality (LQ10) in a sampling plan, a quality limit which corresponds to a specified and relatively low probabilit
31、y of acceptance in this case 10 % probability of acceptance. It is the limiting lot quality characteristic that a lot of this if quality would occur. 3.11 acceptance quality limit (AQL) a quality limit which in a sampling plan corresponds to a specified but relatively high probability of acceptance
32、It is the maximum per cent defective (or the maximum number of defects per hundred units) that, for purposes of sampling inspection, can be considered satisfactory as a process average. 3.12 finished bolt a bolt ready for use, inclusive of any possible treatments and/or surface coatings, as specifie
33、d in the dimensional standard or definition document 4 Certification and quality assurance 4.1 Qualification 4.1.1 Purpose The purpose of qualification tests is to ensure that the bolt design and bolt manufacturing conditions allow the bolt to comply with the requirements of this standard. 4.1.2 Con
34、ditions The qualification tests summarized in Table 3 shall be performed on each type and diameter of bolt. Proposed changes in manufacturing source or procedure shall be subject to the requirements of EN 3041. 25 bolts selected from a single inspection lot by simple random sampling shall be subject
35、ed to the qualification tests. The number of bolts to be subjected to each test as well as the method(s) to be used are specified in Table 1. The tests to be applied to each bolt are shown in Table 4. The test programme may possibly be reduced, this decision will be based on the comparison of result
36、s obtained from parts of similar design, size and manufacturing conditions. All or part of these tests may also be performed for production acceptance, when a reinforced inspection seems to be necessary, or to survey bolts that have not proved satisfactory in use. BS EN 3685:20087 In that case, the
37、sample to be subjected to these tests is the same as that used for production acceptance tests. 4.1.3 Qualification test requirements and procedures The qualification test requirements and procedures shall be to the requirements of EN 9133. 4.1.4 Qualified manufacturers A list of qualified manufactu
38、rers for specific standard parts is listed in TR 3040-1. 4.2 Acceptance 4.2.1 Purpose The purpose of acceptance tests is to check, as simply as possible, by a method representative of actual use conditions, with the uncertainty inherent to statistical sampling, that the bolts constituting the batch
39、satisfy the requirements of this standard. 4.2.2 Conditions Acceptance tests are summarized in Table 3. They shall be performed on each batch. Table 1 specifies the test method and sampling plan to be used for each test. Bolts from the batch to be tested shall be selected by simple random sampling.
40、Each bolt may be submitted to several tests. The bolts to be subjected to destructive tests may be those on which non-destructive tests have been performed. 4.3 Quality system certification 4.3.1 Purpose The purpose of quality system certification is to ensure that the manufacturer has demonstrated
41、the acceptability of his quality system and his ability for continuing production of parts to this standard, to the required limit of quality. 4.3.2 Requirements and procedure The requirements and procedures for quality system certification shall be to the requirements of ISO 9000. 4.4 Responsibilit
42、y for inspection and tests The manufacturer is responsible for the performance of all inspection and test requirements as specified herein. Each manufacturer will use their own or exceptionally any other facilities approved in accordance with 4.1 and 4.2 for the implementation of these inspection an
43、d test requirements. 4.5 Inspection and test report A test report showing actual numerical values shall be provided at the purchasers option as part of the terms of the purchase order. BS EN 3685:20088 5 Technical requirements and test method See Table 1. Table 1 Clause Characteristic Requirement In
44、spection and test method Q/A aSample size 5.1 Material Material FE-2601 to specification EN 3761 supplied by an approved source: shall be used for the manufacture of bolts to this standard. As stated in the material specification. Q 25 5.2 Dimensions, tolerances of form and position, threads and qua
45、lity A Tables 6 and 7 5.2.1 Dimensions The dimensions of the finished bolts shall conform to the product standard or drawing. All dimensions shall be controlled by an approved system of gauging. 5.2.2 Tolerances of form and position Tolerances of form and position shall conform to the product standa
46、rd or drawing. Tolerances of form and position shall be controlled by an approved system of gauging. 5.2.3 Threads Threads shall conform to the product standard or drawing. Threads shall be gauged by an approved system of gauging. 5.3 Manufacturing 5.3.1 Forging The heads of the bolts shall be forme
47、d by hot or cold forging. If hot forged the forging temperature shall not exceed 1 150 C and shall be air cooled or faster. The method of forging shall be approved. The heating equipment for forging shall be of a type which ensures a consistent temperature throughout the batch. continued BS EN 3685:
48、20089 Table 1 (continued) Clause Characteristic Requirement Inspection and test method Q/A aSample size 5.3.2 Heat treatment The heat treatment medium or atmosphere shall not cause any surface contamination except as permitted by 5.5.6. The heat treatment equipment shall be approved. Any scale which
49、 will not be removed by subsequent machining shall be removed by abrasive blasting. The equipment for abrasive blasting shall be approved. 5.3.2.1 Solution and precipitation heat treatment The headed blanks shall be precipitation treated at a temperature 710 C - 730 C holding the selected temperature within 8 C for not less than 16 hours and cooling in air. 5.3.3 Removal of surface contamination After precipitation treatment the headed blanks shall have all the shank and bearing surfaces grou
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1