BS EN 3841-304-2005 Aerospace series - Circuit breakers - Test methods - Tripping points《航空航天系列 断路器 试验方法 跳闸点》.pdf

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3841-304:2004 Circuit breakers Test methods Part 304: Tripping points The European Standard EN 3841-304:2004 has the status of a British Standard ICS 49.060 BS EN 3841-304:2004 This British Standard was published under the authority of the Standards Policy and

2、 Strategy Committee on 22 February 2005 BSI 22 February 2005 ISBN 0 580 45527 0 National foreword This British Standard is the official English language version of EN 3841-304:2004. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and f

3、ibre optic technology, to Subcommittee ACE/6/5, Circuit breakers, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications refer

4、red to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provis

5、ions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals f

6、or change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. The BSI copyright notice displayed in

7、 this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN3841304 December2004 ICS49.060 Englishversion AerospaceseriesCircuitbreakersTestmethodsPart304: Trippingpoints SriearospatialeDisjonc

8、teursMthodesdessais Partie304:Limitesdedclenchement LuftundRaumfahrtSchutzschalterPrfverfahrenTeil 304:Auslsegrenzen ThisEuropeanStandardwasapprovedbyCENon10September2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestat

9、usofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation

10、 undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,

11、Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyan

12、ymeansreserved worldwideforCENnationalMembers. Ref.No.EN3841304:2004:EEN 3841-304:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Method 4 EN 3841-304:2004 (E) 3 Foreword This document (EN 3841-304:2004) has been prepared by the European Association of Aerospace Manufacturers

13、 - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European St

14、andard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. According to the CEN/CENELEC Internal Regulations, the national standar

15、ds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slov

16、akia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 3841-304:2004 (E) 4 1 Scope This standard specifies a method of verifying the tripping points of circuit breakers. It shall be used together with EN 3841-100. 2 Normative references The following referenced documents are indispensable

17、 for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3841-100, Aerospace series Circuit breakers Test methods Part 100: General 3 Method 3.1 General co

18、nditions The circuit breakers shall be mounted as described in clause 4 of EN 3841-100, in connection with the applicable technical specification. During the test, the current applied to the circuit breakers shall remain constant. The current may be either d.c. or a.c. with frequency indicated in th

19、e product standard and resistive load. Prior to each test, the tripped circuit breakers (with main contacts open) and their connections shall be stabilized to the specified temperature 5 C. The test shall only be carried out at normal airflow. 3.2 Tripping points 3.2.1 Minimum tripping point The cir

20、cuit breakers shall be subjected to the current specified in the product standard. The minimum tripping time shall be in accordance with the product standard. The circuit breakers shall not trip during this period. The temperature of the terminals shall be measured throughout the test. The temperatu

21、re increase of the terminals shall not exceed 75 K. For this measurement, thermocouples or other appropriate low conductivity sensors shall be used, placed on a terminal as close as possible to the housing of the circuit breaker. 3.2.2 Maximum tripping point When subjected to the current specified f

22、or the maximum tripping point in the product standard, the circuit breakers shall trip within the specified time. 3.2.3 Overload tripping The circuit breakers shall be subjected to the currents specified in the product standard and the tripping time shall be measured. EN 3841-304:2004 (E) 5 3.2.4 Tr

23、ip free release Overload tripping with the actuator button held in the closed position shall be verified in accordance with the conditions specified in the technical specification. 3.2.5 Minimum tripping points at altitude The circuit breakers shall be placed in a suitable low pressure/temperature c

24、hamber and shall be connected to the applicable current source. The chamber shall be set to the test temperature indicated in the product standard held constant for a minimum of 1 h. Then the chamber shall be brought to the atmospheric pressure corresponding to the altitude specified in the product

25、standard. Under these conditions, the circuit breakers shall be subjected to the current defined in the product standard for the minimum points at altitude and temperature. The test period shall be 1 h. 3.3 Requirements The tripping points and trip times shall meet the requirements of the product st

26、andard. BS EN 3841-304:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.

27、 Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy

28、or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensu

29、res that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also avail

30、able from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on n

31、ational, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20

32、8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001.

33、Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyri

34、ght, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwis

35、e without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.