BS EN 4008-003-2017 Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Positioner for crimping tool M22520 2-01 Product standa.pdf

1、BS EN 4008-003:2017Aerospace series Elements of electrical and optical connection Crimping tools and associated accessoriesPart 003: Positioner for crimping tool M22520/2-01 - Product standardBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 4008-003:2017 BRITISH

2、 STANDARDNational forewordThis British Standard is the UK implementation of EN 4008-003:2017. The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtain

3、ed on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 96017 8 ICS 49.060Compliance with a

4、British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4008-003:2017EUROPEAN STANDARD NORME

5、EUROPENNE EUROPISCHE NORM EN 4008-003 March 2017 ICS 49.060 English Version Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 003: Positioner for crimping tool M22520/2-01 - Product standard Srie arospatiale - Organes de connexion lec

6、trique et optique - Outils de sertissage et accessoires associs - Partie 003: Positionneur pour pince sertir M22520/2-01 - Norme de produit Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeuge und zugehriges Zubehr - Teil 003: Positionierer fr Crimpzange M22520/2-01 -

7、Produktnorm This European Standard was approved by CEN on 2 January 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogr

8、aphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibi

9、lity of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic

10、 of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE N

11、ORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4008-003:2017 EBS EN 4008-003:2017EN 4008-003:2017 (E) 2 Contents Pag

12、e European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 4 5 Designation 6 6 Marking . 6 7 Technical specification 6 BS EN 4008-003:2017EN 4008-003:2017 (E) 3 European foreword This document (EN 4008-003:2017) has been prepared by the Aerospac

13、e and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to

14、 its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017 and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn t

15、o the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following c

16、ountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

17、 Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4008-003:2017EN 4008-003:2017 (E) 4 1 Scope This European Standard specifies the characteristics for the positioner used with the M22520/2-01 crimping tool to crimp electrical con

18、tacts according to EN 4008-002. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenc

19、ed document (including any amendments) applies. EN 2591-100, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 3155-024, Aerospace series Electrical contacts used in elements of connection Part 024: Contacts, electrical, triaxial, size 8, male, type D,

20、crimp, class S Product standard EN 3155-025, Aerospace series Electrical contacts used in elements of connection Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S Product standard EN 4008-001, Aerospace series Elements of electrical and optical connection Crimping tool

21、s and associated accessories Part 001: Technical specification EN 4008-002, Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Part 002: List of product standards SAE AS 22520/2-01, Crimping Tools, Terminal, Hand, Wire Termination for Wire Barrel

22、 Sizes 20 through 28 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2591-100 apply. 4 Required characteristics 4.1 Description Securing the positioner on the crimping tool is provided by the combined action of the two bayonets and the pressure from

23、 the internal spring on the central moving part (locator). The appropriate longitudinal positioning of the contact with respect to the crimping tool indenters is performed by the contact butting against a shoulder on the central part bore. 1) Published by: SAE National (US) Society of Automotive Eng

24、ineers http:/www.sae.org/ BS EN 4008-003:2017EN 4008-003:2017 (E) 5 4.2 Dimensions Dimensions of positioner are given in Figure 1. Dimensions are given in millimetres. General tolerances: 0,127 mm Key 1 Data plate 2 2 places 3 Locator in extended position, see Figure 2. 4 Bayonet lock pins 1,07 1,12

25、 5 Mark on this surface: Manufacturers name and Part Number 6 Mark on this surface: EN 4008-003 “use with M22520/2-01 basic tool“ (conform to SAE AS 22520/2-01) Figure 1 Locator assembly BS EN 4008-003:2017EN 4008-003:2017 (E) 6 Key 1 0,127 45 chamfer Figure 2 Detail A 5 Designation EXAMPLE NOTE If

26、necessary, the code I9005 shall be placed between the description block and the identity block. 6 Marking See Figure 1. 7 Technical specification See EN 4008-001. This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publica

27、tions, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape the

28、ir combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve

29、their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of B

30、SI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services

31、team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such informa

32、tion to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoe

33、ver without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is

34、 accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use onl

35、y. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).

36、Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards

37、Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purch

38、ase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about b

39、ecoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure

40、your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British

41、 Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20