BS EN 4084-2009 Aerospace series - Nuts anchor self-locking fixed two lug with counterbore in alloy steel cadmium plated MoS2 lubricated - Classification 1100 MPa (at ambient tempe.pdf

1、BS EN 4084:2009ICS 49.030.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Nuts, anchor, self-locking, fixed, twolug, with counterbore,in alloy steel,cadmium plated,MoS2 lubricated Classification: 1 100MPA (at ambienttemperature) / 235 CLicense

2、d Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 69811 8Amendments/corrigenda issued since publicationDate Commen

3、tsBS EN 4084:2009National forewordThis British Standard is the UK implementation of EN 4084:2009. The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can be obtained onrequ

4、est to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/03

5、/2010 07:16, Uncontrolled Copy, (c) BSIBS EN 4084:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4084 November 2009 ICS 49.030.30 English Version Aerospace series - Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classificatio

6、n: 1 100 MPA (at ambient temperature) / 235 C Srie arospatiale - crous river, freinage interne, fixes, double patte, avec chambrage, en acier, cadmis, lubrifis MoS2 - Classification: 1 100 MPa ( temprature ambiente)/235 C Luft- und Raumfahrt - Annietmuttern, selbstsichernd, beiderseitiger Flansch mi

7、t zylindrischer Aussenkung aus legiertem Stahl, verkadmet, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 235 C This European Standard was approved by CEN on 15 September 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for gi

8、ving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official v

9、ersions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belg

10、ium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR

11、 STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4084:2009: ELicensed Copy: Wang Bin, ISO/EXCHA

12、NGE CHINA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIBS EN 4084:2009EN 4084:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Required characteristics .53.1 Configuration Dimensions Masses 53.2 Materials .53.3 Surface treatment 54 Designation 85 Marking .86 Technical

13、specification .8Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIBS EN 4084:2009EN 4084:2009 (E) 3 Foreword This document (EN 4084:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). Aft

14、er enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a

15、national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

16、ights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus,

17、 Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CH

18、INA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIBS EN 4084:2009EN 4084:2009 (E) 4 1 Scope This European Standard specifies the characteristics of two lug fixed anchor nuts, with counterbore and a self-locking feature achieved by forming the upper portion out-of-round, in alloy steel, cadm

19、ium plated, MoS2 lubricated. Classification: 1 100 MPa 1)/ 235 C 2). 2 Normative references EN 2133, Aerospace series Cadmium plating of steels with specified tensile strength 1450 MPa, copper, copper alloys and nickel alloys EN 2424:2008, Aerospace series Marking of aerospace products EN 2491, Aero

20、space series Molybdenum disulphide dry lubricants Coating methods EN 2542, Aerospace series Steel FE-PL1502 (25CrMo4) Annealed Bar and wire - De 40 mm For prevailing torque nuts EN 2543, Aerospace series Steel FE-PL1502 (25CrMo4) Annealed Sheet and strip 0,3 mm a 2 mm For prevailing torque nuts EN 9

21、100, Quality Management Systems Requirements for Aviation, Space and Defense Organizations EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts ISO 3223, Aerospace Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, clas

22、sifications: 1 100 MPa (at ambient temperature)/235 C, 1 100 MPa (at ambient temperature)/315 C and 1 100 MPa (at ambient temperature)/425 C Dimensions ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts ISO 5858, Aerospace Nuts, self-locking, with maximum operating temperat

23、ure less than or equal to 425 C Procurement specification ISO 8788, Aerospace Nuts, metric Tolerances of form and position TR 3791, Aerospace series Materials for self-locking nuts, threaded inserts and screw thread inserts of temperature classes 425 C 3)1) Corresponds to strength class of the assoc

24、iated bolt, the 100 % load of which it is able to withstand, when tested at ambient temperature, without breaking or cracking. 2) Maximum temperature that the nut can withstand without continuous change in its original characteristics, after return to ambient temperature. The maximum temperature is

25、determined by the surface treatment. 3) Published as ASD-STAN Technical Report at the date of publication of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIBS EN 4084:2009EN 4084:2009 (E) 5 3 Required characteristics 3.1 Configuratio

26、n Dimensions Masses See Figure 1 and Table 1. Dimensions and tolerances are in conformity with ISO 3223, expressed in millimetres and apply after cadmium plating but before MoS2lubrication. Form and position tolerances shall be in conformity with ISO 8788 and those specified in Table 1. 3.2 Material

27、s EN 2542, EN 2543 or TR 3791. 3.3 Surface treatment EN 2133, 5 m minimum on threads and all surfaces which can be contacted by a 20 mm diameter ball. On all other surfaces a continuous deposit shall be present, plus EN 2491, thickness not specified. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAND

28、ARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIBS EN 4084:2009EN 4084:2009 (E) 6 Dimensions in millimetres Key 1 Thread 2 Marking 3 Seating face a These values in micrometres apply before surface treatement. The do not apply to threads and sheared edges the surface texture of which will be as ach

29、ieved by usual manufacturing methods. b Radius or chamfer c Form out-of-round in this area to achieve the self- locking. Tooling marks are permitted in this area. d Alternatives: countersunk rivet holes (when specified by purchaser) may be dimpled or cut countersunk (at manufacturers option). e Sect

30、ion on X Figure 1 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIBS EN 4084:2009EN 4084:2009 (E) 7 Table 1 Diameter Code Threada E F G H Jb K L M Nc R S V Mass kg/1 000min. min. max. max. max. max. max. 0,25pieces approx. 030 MJ3x0,5-4H6H 6 12 d d4

31、,6 6 17,2 3,2 1 2,5 2,5 4,8 0,45 040 MJ4x0,7-4H6H 8,5 17 4,4 2,2 6,2 8 23,2 5,8 3 1,15 050 MJ5x0,8-4H6H 9,5 19 5,5 2,4 7,3 9 25,2 6,9 1,30 060 MJ6x1-4H5H 11 22 6,5 2,7 8,7 10 29,2 8,1 1,2 2,10 080 MJ8x1-4H5H 8,5 10,9 13 9,9 1,5 3,5 3 5,7 4,40 100 MJ10x1,25-4H5H 13 26 10,5 3 12,9 16,2 35,2 12 1,6 4,5

32、 3,5 6,6 7,65 aIn accordance with ISO 5855-2. In the self-locking zone, the tolerances apply before forming out-of-round. bIs to sharp corners (chamfered) or point of tangency (radiused). cIs applicable at the rivet hole location. dDiameter code 030 does not have a counterbore. Licensed Copy: Wang B

33、in, ISO/EXCHANGE CHINA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIBS EN 4084:2009EN 4084:2009 (E) 8 4 Designation EXAMPLE Description block NUT Identity block EN4084-060 Standard number Hole code (see Table 2) Diameter code (see Table 1) NOTE If necessary, the code I9005 shall be placed

34、between the description block and the identity block. Table 2 Option Code Plain rivet holes (hyphen) Dimpled or countersunk rivet holes K 5 Marking EN 2424:2008, style N. See Figure 1. 6 Technical specification ISO 5858 except for: Approval of manufactures: see EN 9100; Qualification of products: se

35、e EN 9133. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIBS EN 4084:2009This page has been intentionally left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSIBS EN4084:2009BSI GroupHeadquarte

36、rs 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Ro

37、yal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inacc

38、uracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which en

39、suresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit

40、/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on n

41、ational, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048

42、 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regard

43、ing online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardizat

44、ion bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the fr

45、ee use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/03/2010 07:16, Uncontrolled Copy, (c) BSI