BS EN 4165-027-2015 Aerospace series Connectors electrical rectangular modular Operating temperature 175C continuous Rack and panel rear mounted plug for 2 and 4 modules series 3 P.pdf

1、BSI Standards PublicationBS EN 4165-027:2015Aerospace series Connectors, electrical,r e c t a n g u l a r , m o d u l a r Operating temperature 175 CcontinuousPart 027: Rack and panel rear mountedplug for 2 and 4 modules, series 3 Product standardBS EN 4165-027:2015 BRITISH STANDARDNational foreword

2、This British Standard is the UK implementation of EN 4165-027:2015.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretar

3、y.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 89605 7ICS 49.060Compliance with a British Standard cannot confer i

4、mmunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4165-027:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 41

5、65-027 November 2015 ICS 49.060 English Version Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard Srie arospatiale - Connecteurs lectriques rectangulai

6、res modulaires - Temprature dutilisation 175 C continu - Partie 027 : Fiches de rack fixations inverses 2 et 4 modules, srie 3 - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 C konstant - Teil 027: Freier rckseitiger Einschu

7、b- und Gehusesteckverbinder mit 2 und 4 Modulen, Serie 3 - Produktnorm This European Standard was approved by CEN on 8 June 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standa

8、rd without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any

9、 other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repub

10、lic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN

11、COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-027:2015 EBS EN

12、4165-027:2015EN 4165-027:2015 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 4 5 Rack and panel rear plug 5 5.1 For 2 modules classes W, F 5 5.2 For 4 modules classes W, F 6 5.3 Rack and panel plug class. 7 6 Design

13、ation 7 7 Marking . 8 8 Technical specification 8 Bibliography 9 BS EN 4165-027:2015EN 4165-027:2015 (E) 3 European foreword This document (EN 4165-027:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carrie

14、d out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, e

15、ither by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the latest by May 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CE

16、NELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu

17、blic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS E

18、N 4165-027:2015EN 4165-027:2015 (E) 4 1 Scope This European Standard defines the rack and panel rear mounted plug 2 and 4 modules, series 3 used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 4165-002. The protective covers correspo

19、nding to those plugs are defined in prEN 4165-019. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edit

20、ion of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series

21、 Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of performance and contact arrangements prEN 4165-019, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 019: Protective cover for plug

22、, for 2 or 4 modules series 2 and series 3 Product Standard EN 4165-021, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 021: Coupling system keyway for plug Product standard 3 Terms and definitions For the purposes of this document, the term

23、s and definitions given in EN 4165-001 apply. 4 Required characteristics See Figure 1 for 2 modules and Figure 2 for 4 modules. BS EN 4165-027:2015EN 4165-027:2015 (E) 5 5 Rack and panel rear plug 5.1 For 2 modules classes W, F See Figure 1. Dimensions are in millimetres NOTE Screw coupling torque o

24、n panel = 0,6 N.m 0,1 N.m Figure 1 Series 3 rack and panel plug 2 modules BS EN 4165-027:2015EN 4165-027:2015 (E) 6 5.2 For 4 modules classes W, F See Figure 2. Dimensions are in millimetres NOTE Screw coupling torque on panel= 0,6 N.m 0,1 N.m Figure 2 Series 3 rack and panel plug 4 modules BS EN 41

25、65-027:2015EN 4165-027:2015 (E) 7 5.3 Rack and panel plug class See Table 1. Table 1 Rack and panel plug class Class Description W Rack and panel plug with housing (shell) olive drab cadmium plated, aluminium alloy, 500 hours resistance to salt mist, maximum operating temperature 175 C continuous F

26、Rack and panel plug with housing (shell) black nickel plated, aluminium alloy, 96 hours resistance to salt mist, maximum operating temperature 175 C continuous 6 Designation EXAMPLE Description block ELECTRICAL RACK AND PANEL PLUG Identity block EN4165F9B4R00 Number of the basic standard Class type

27、(see Table 1) Type 9: Rack and panel plug (see EN 4165-002) Type B = series 3 Shell type 4 = plug 4 modules 2 = plug 2 modules R = rear mounting State of delivery plug keying coupling (see EN 4165-021) 0 A = Not delivered Standard 1 2 3 4 5 6 Keying code (special coding) Position of keying coupling

28、0 Not mounted 1 2 3 4 5 6 Fitted in the plug BS EN 4165-027:2015EN 4165-027:2015 (E) 8 7 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 Technical specification See EN 4165-001. BS EN 4165-027:2015EN 4165-027:2015 (E) 9

29、 Bibliography 1 EN 4165-003, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 003: Modules series 2 and series 3 Product standard 2 EN 4165-013, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuo

30、us Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 Product standard 3 EN 4165-014, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3

31、 Product standard This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardizatio

32、n products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards

33、 -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide

34、you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted Euro

35、pean and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription service

36、s are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed

37、daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Mem

38、bers. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your

39、intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continual

40、ly improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI

41、publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyrig

42、ht, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW