BS EN 4173-2006 Aerospace series - Lockbolts 100 countersunk normal head sheartype close tolerance in titanium alloy TI-P64001 anodized metric series - Classification 1100 MPa (at .pdf

1、BRITISH STANDARD AEROSPACE SERIESBS EN 4173:2006Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series Classification: 1 100 MPa (at ambient temperature) / 315 CThe European Standard EN 4173:2006 has the status of a British StandardIC

2、S 49.030.60g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Fri Jul 14 07:49:50 BST 2006, Uncontrolled Copy, (c) BSIBS E

3、N 4173:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 April 2006 BSI 2006ISBN 0 580 48245 6National forewordThis British Standard is the official English language version of EN 4173:2006.The UK participation in its preparation was ent

4、rusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publicat

5、ions referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessa

6、ry provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpr

7、etation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover.The BSI copyright not

8、ice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Fri Jul 14 07:49:50 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4173 April 2006 ICS 49.030.60

9、English Version Aerospace series - Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 C Srie arospatiale - Rivets bague sertie, tte fraise 100 normale, cisaillement, tolra

10、nce serre, en alliage de titane TI-P64001, anodiss, srie mtrique - Classification : 1 100 MPa ( temprature ambiante) / 315 C Luft- und Raumfahrt - Paniete, mit 100 normalem Senkkopf, Schertyp, aus Titanlegierung TI-P64001, anodisiert, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 C

11、This European Standard was approved by CEN on 13 January 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref

12、erences concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member

13、into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan

14、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 C

15、EN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4173:2006: ELicensed Copy: Wang Bin, na, Fri Jul 14 07:49:50 BST 2006, Uncontrolled Copy, (c) BSI2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Required characterist

16、ics 4 4 Description 7 5 Marking 7 6 Technical specification.7 EN 4173:2006Licensed Copy: Wang Bin, na, Fri Jul 14 07:49:50 BST 2006, Uncontrolled Copy, (c) BSI3 Foreword This European Standard (EN 4173:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (

17、AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be give

18、n the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. Attention is drawn to the possibility that some of the elements of this document may

19、be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

20、Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 4173:2006Licensed Cop

21、y: Wang Bin, na, Fri Jul 14 07:49:50 BST 2006, Uncontrolled Copy, (c) BSI4 1 Scope This standard specifies the characteristics of lockbolts with 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series, for use in aerospace applications. Classific

22、ation : 1 100 MPa 1)/ 315 C 2)In both versions, i.e. with and without pintail these lockbolts fulfill the same function when installed and are statically / dynamically equivalent. They are intended to be used with collars to EN 4174 or EN 4175. 2 Normative references The following referenced documen

23、ts are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products. EN 2808, Aerospace serie

24、s Anodizing of titanium and titanium alloys. EN 4174, Aerospace series Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series. EN 4175, Aerospace series Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series. EN 4176, Aerospace serie

25、s Lockbolts, 100 countersunk normal head or protruding head, tension- / shear-type, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating Collars in titanium TI-P99002 or in aluminium alloy 2024 Metric series Technical specification. MIL-L-87132B, Lubricant, Cety

26、l Alcohol, 1-Hexadecanol, Application to Fasteners. 3)TR 3775, Aerospace series Bolts and pins Materials. 4)3 Required characteristics 3.1 Configuration - Dimensions - Masses See Figure 1 and Tables 1 and 2. Dimensions and tolerances are expressed in millimetres and apply after surface treatment. 1)

27、 Minimum tensile strength of the material at ambient temperature. 2) Maximum temperature that the lockbolt can withstand without continuous change in its original characteristics, after return to ambient temperature. The maximum temperature is determined by the material. 3) Published by: Department

28、of Defense (DoD), the Pentagon, Washington, D.C.20301, USA. 4) Published as AECMA Technical Report at the date of publication of this standard. EN 4173:2006Licensed Copy: Wang Bin, na, Fri Jul 14 07:49:50 BST 2006, Uncontrolled Copy, (c) BSI5 3.2 Materials TR 3775 (titanium alloy, strength class 1 1

29、00 MPa) 3.3 Surface treatments EN 2808 Lubrication with cetylic alcohol (chlorine free) according to MIL-L-87132 Values in micrometres apply prior to surface treatment. Lockbolt, version P with pintail (pulltype) Lockbolt, version S without pintail (stumptype) Key 1 Location of manufactures symbol 2

30、 Sealant escape groove option: code G 3 Predetermined breaking point 4 Marking 5 Groove section at manufacturers option 6 Lightening hole 7 Drill start Figure 1 3,2 1,6 EN 4173:2006Licensed Copy: Wang Bin, na, Fri Jul 14 07:49:50 BST 2006, Uncontrolled Copy, (c) BSI6 Table 1 C1C2D1D2D3D4L2R Diameter

31、 codemax. max. min. f7 min. max. max. D5D6max. L4K max. min. 040 0,08 0,93 0,85 4 7,2 3,88 1,65 8 5,78 2,95 4,6 1,69 050 0,96 0,88 5 9 4,89 2,18 10 7,71 3 5 2,11 060 1,26 1,18 6 10,8 5,89 2,77 12 9 4,12 6,15 2,53 0,65 0,4 080 1,6 1,52 8 14,8 7,88 3,58 16 12,21 5,49 8,4 3,38 100 0,1 1,93 1,85 10 18,8

32、 9,88 4,34 20 15,43 6,17 10,6 4,23 0,75 0,5 Table 2 Diameter code 040 050 060 080 100 Length Grip length L3 Mass bL3Mass bL3Mass bL3Mass bL3Mass bcode L1a 0,25 over to + 2 0 + 20 + 2 0 + 2 0 + 2 0 040 4 2 4 20,9 0,48 23,3 0,80 25,6 1,83 060 6 4 6 22,9 0,59 25,3 0,97 27,6 2,08 31,2 4,07 35,4 7,06 080

33、 8 6 8 24,9 0,70 27,3 1,14 29,6 2,33 33,2 4,51 37,4 7,76 100 10 8 10 26,9 0,81 29,3 1,31 31,6 2,58 35,2 4,95 39,4 8,46 120 12 10 12 28,9 0,92 31,3 1,48 33,6 2,83 37,2 5,39 41,4 9,16 140 14 12 14 30,9 1,03 33,3 1,65 35,6 3,08 39,2 5,83 43,4 9,86 160 16 14 16 32,9 1,14 35,3 1,82 37,6 3,33 41,2 6,27 45

34、,4 10,56 180 18 16 18 34,9 1,25 37,3 1,99 39,6 3,58 43,2 6,71 47,4 11,26 200 20 18 20 36,9 1,36 39,3 2,16 41,6 3,83 45,2 7,15 49,4 11,96 220 22 20 22 38,9 1,47 41,3 2,33 43,6 4,08 47,2 7,59 51,4 12,66 240 24 22 24 40,9 1,58 43,3 2,50 45,6 4,33 49,2 8,03 53,4 13,36 260 26 24 26 42,9 1,69 45,3 2,67 47

35、,6 4,58 51,2 8,47 55,4 14,06 280 28 26 28 44,9 1,80 47,3 2,84 49,6 4,83 53,2 8,91 57,4 14,76 300 30 28 30 46,9 1,91 49,3 3,01 51,6 5,08 55,2 9,35 59,4 15,46 320 32 30 32 48,9 2,02 51,3 3,18 53,6 5,33 57,2 9,79 61,4 16,16 340 34 32 34 50,9 2,13 53,3 3,35 55,6 5,58 59,2 10,23 63,4 16,86 360 36 34 36 5

36、2,9 2,24 55,3 3,52 57,6 5,83 61,2 10,67 65,4 17,56 380 38 36 38 54,9 2,35 57,3 3,69 59,6 6,08 63,2 11,11 67,4 18,26 400 40 38 40 56,9 2,46 59,3 3,86 61,6 6,33 65,2 11,55 69,4 18,96 420 42 40 42 58,9 2,57 61,3 4,03 63,6 6,58 67,2 11,99 71,4 19,66 440 44 42 44 60,9 2,68 63,3 4,20 65,6 6,83 69,2 12,43

37、73,4 20,36 460 46 44 46 62,9 2,79 65,3 4,37 67,6 7,08 71,2 12,87 75,4 21,06 480 48 46 48 64,9 2,90 67,3 4,54 69,6 7,33 73,2 13,31 77,4 21,76 500 50 48 50 66,9 3,01 69,3 4,71 71,6 7,58 75,2 13,75 79,4 22,46 aMeasured from the bearing surface under the head to the end of full cylindrical portion of sh

38、ank. bApproximate values (kg/1 000 installed pieces without collar), calculated on the basis of 4,45 kg/dm3, for information purposes only. Mass reduction for version “S“ = 5 %. Average is depending of grip length. EN 4173:2006Licensed Copy: Wang Bin, na, Fri Jul 14 07:49:50 BST 2006, Uncontrolled C

39、opy, (c) BSI7 4 Description EXAMPLE Description block LOCKBOLT Identity block EN4173P040-140G Number of this standard Lockbolt version 5)(see Figure 1) Diameter code (see Table 1) Length code (see Table 2) Sealant escape groove code (see Figure 1) NOTE If necessary, the code I9005 shall be placed be

40、tween the description block and the identity block. 5 Marking EN 2424, style C (see Figure 1). 6 Technical specification See EN 4176. 5) If it is not intended to define the version in the documents (with or without pintail, depending on whether riveting will be manual or automatic), it is not necess

41、ary to give a code letter. However, the version has to be clearly indicated in the purchase order. EN 4173:2006Licensed Copy: Wang Bin, na, Fri Jul 14 07:49:50 BST 2006, Uncontrolled Copy, (c) BSIBS EN 4173:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independ

42、ent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they pos

43、sess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identit

44、y of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international

45、and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BS

46、I implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electron

47、ic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial disco

48、unts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/ww

49、w.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying