BS EN 459-1-2015 Building lime Definitions specifications and conformity criteria《建筑用石灰 定义 规范和合格标准》.pdf

1、BSI Standards PublicationBS EN 459-1:2015Building limePart 1: Definitions, specifications andconformity criteriaBS EN 459-1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 459-1:2015. Itsupersedes BS EN 459-1:2010 which is withdrawn.The UK participation in

2、its preparation was entrusted to TechnicalCommittee B/516/11, Lime.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication

3、. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 87067 5ICS 01.040.91; 91.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Co

4、mmittee on 30 April 2015.Amendments issued since publicationDate Text affectedBS EN 459-1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 459-1 April 2015 ICS 91.100.10 Supersedes EN 459-1:2010English Version Building lime - Part 1: Definitions, specifications and conformity criteria Chaux

5、de construction - Partie 1 : Dfinitions, spcifications et critres de conformit Baukalk - Teil 1: Begriffe, Anforderungen und Konformittskriterien This European Standard was approved by CEN on 16 February 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate

6、the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standa

7、rd exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the natio

8、nal standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slov

9、akia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any mean

10、s reserved worldwide for CEN national Members. Ref. No. EN 459-1:2015 EBS EN 459-1:2015EN 459-1:2015 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Air lime 6 4.1 General 6 4.2 Sub-families of air lime .7 4.3 Forms of air lime 7 4.4 Cal

11、cium lime .7 4.5 Dolomitic lime . 13 5 Lime with hydraulic properties 18 5.1 General . 18 5.2 Sub-families of lime with hydraulic properties 18 5.3 Natural hydraulic lime 19 5.4 Formulated lime 20 5.5 Hydraulic lime . 23 5.6 Assessment and verification of constancy of performance of natural hydrauli

12、c lime, formulated lime and hydraulic lime 25 5.7 Standard designation of lime with hydraulic properties 28 Annex A (normative) Statistical evaluation methods for strength, physical and chemical properties 29 A.1 Statistical conformity criteria 29 A.2 Single result conformity criteria 31 Annex B (in

13、formative) Additional properties for building lime 36 Annex C (informative) Schematic diagram for the types of lime and fields of application 38 Annex D (normative) Declaration of composition for formulated lime . 39 D.1 Main constituents content to be declared by the producer . 39 D.2 Minor constit

14、uents 39 D.3 Additives 39 D.4 Declaration of composition . 39 D.5 Standard designation . 40 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Product Regulation . 41 Bibliography . 51 BS EN 459-1:2015EN 459-1:2015 (E) 3 Foreword This document (

15、EN 459-1:2015) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015

16、, and conflicting national standards shall be withdrawn at the latest by January 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.

17、 This document supersedes EN 459-1:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. EN 459,

18、Building lime, consists of the following parts: Part 1: Definitions, specifications and conformity criteria; Part 2: Test methods; Part 3: Conformity evaluation. The requirements in EN 459-1 are based on the results of tests on building lime determined in accordance with EN 459-2. Annexes A and D ar

19、e normative, Annexes B, C and ZA are informative. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,

20、Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 459-1:2015EN 459-1:2015 (E) 4 I

21、ntroduction The revision of this European Standard for building lime was initiated by Decision 4 taken by CEN/TC 51 “Cement and building limes” in 2013. Different sources of raw materials and different climatic conditions have led to different developments in building construction and civil engineer

22、ing practices and materials and therefore to different kinds of building lime in different regions of Europe. The inclusion of a wider range of building lime which exists in Europe has made it necessary to establish a number of classes. The previous national standards for building lime generally als

23、o formed the basis for different areas of application (see Annex C (informative). The classification chosen therefore also takes into consideration these circumstances as far as possible. For a better understanding, the standard makes a clear distinction between air lime (Clause 4) and lime with hyd

24、raulic properties (Clause 5). Depending on the composition and characteristics of the products, each clause is then divided into sub-paragraphs (calcium lime and dolomitic lime for air lime; natural hydraulic lime, formulated lime and hydraulic lime for lime with hydraulic properties) containing the

25、 appropriate definitions, specifications and conformity criteria. BS EN 459-1:2015EN 459-1:2015 (E) 5 1 Scope This European Standard applies to building lime used for: preparation of binder for mortar (for example for masonry, rendering and plastering); production of other construction products (for

26、 example calcium silicate bricks, autoclaved aerated concrete, concrete, etc.); civil engineering applications (for example soil treatment, asphalt mixtures, etc.). It gives definitions for the different types of building lime and their classification. It also gives requirements for their chemical a

27、nd physical properties which depend on the type of building lime and specifies the conformity criteria. Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of building lime, are outside the scope of this European Standard

28、. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any ame

29、ndments) applies. EN 197-1, Cement Part 1: Composition, specifications and conformity criteria for common cements EN 459-2:2010, Building lime Part 2: Test methods EN 459-3:2015, Building lime Part 3: Conformity evaluation 3 Terms and definitions For the purposes of this document, the following term

30、s, definitions and abbreviations apply. NOTE See also Annex C. 3.1 lime calcium oxide and/or hydroxide, and calcium-magnesium oxide and/or hydroxide produced by the thermal decomposition (calcination) of naturally occurring calcium carbonate (for example limestone, chalk, shells) or naturally occurr

31、ing calcium magnesium carbonate (for example dolomitic limestone, dolomite) 3.2 building lime group of lime products, exclusively consisting of two families: air lime and lime with hydraulic properties, used in applications or materials for construction, building and civil engineering 3.3 air lime1)

32、lime (see 3.1) which combines and hardens with carbon dioxide present in air Note 1 to entry: Air lime has no hydraulic properties. Air lime is divided into two sub-families, calcium lime (CL) and dolomitic lime (DL). 1) Translation of a term used in most European countries. BS EN 459-1:2015EN 459-1

33、:2015 (E) 6 3.4 lime with hydraulic properties building lime (see 3.2) consisting mainly of calcium hydroxide, calcium silicates and calcium aluminates Note 1 to entry: It has the property of setting and hardening when mixed with water and/or under water. Reaction with atmospheric carbon dioxide is

34、part of the hardening process. Lime with hydraulic properties is divided into three sub-families, natural hydraulic lime (NHL), formulated lime (FL) and hydraulic lime (HL). 3.5 allowable probability of acceptance CR for a given sampling plan, allowed probability of acceptance of building lime with

35、a characteristic value outside the specified characteristic value 3.6 sampling plan specific plan which states the (statistical) sample size(s) to be used, the percentile Pkand the allowable probability of acceptance CR 3.7 characteristic value value of a required property outside which lies a speci

36、fied percentage, the percentile Pk, of all the values of the population 3.8 specified characteristic value characteristic value of a strength, physical or chemical property which in the case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached 3.9 s

37、ingle result limit value value of a strength, physical or chemical property which for any single test result in the case of an upper limit is not be exceeded or in the case of a lower limit is, as a minimum, to be reached 3.10 spot sample sample taken at the same time and from one and the same place

38、, relating to the intended tests Note 1 to entry: It can be obtained by combining one or more immediately consecutive increments (see EN 4592). 3.11 autocontrol testing continual testing by the manufacturer of building lime spot samples taken at the point(s) of release from the factory/depot 3.12 co

39、ntrol period period of production and dispatch identified for the evaluation of the autocontrol test results 4 Air lime 4.1 General Air lime is used for the preparation or the production of materials used in building construction as well as in civil engineering. BS EN 459-1:2015EN 459-1:2015 (E) 7 A

40、ir lime (see 3.3) when appropriately batched and mixed with water, forms a paste that improves the workability (values of flow and penetration) and water retention of mortars. The carbonation of hydrates in contact with atmospheric carbon dioxide forms calcium carbonate which develops strength and c

41、ontributes to the durability of mortars containing building lime (hence the name of air lime). Sub-families and forms of air lime are given in 4.2 and 4.3 respectively. 4.2 Sub-families of air lime 4.2.1 Calcium lime (CL) Calcium lime is an air lime consisting mainly of calcium oxide and/or calcium

42、hydroxide without any hydraulic or pozzolanic addition. 4.2.2 Dolomitic lime (DL) Dolomitic lime is an air lime consisting mainly of calcium magnesium oxide and/or calcium magnesium hydroxide without any hydraulic or pozzolanic addition. 4.3 Forms of air lime 4.3.1 Quicklime (Q) Quicklime is an air

43、lime mainly in the oxide form which reacts exothermically on contact with water. Quicklime is available in a range of sizes from lump to powder. 4.3.2 Hydrated lime (S, S PL or S ML) Hydrated lime is an air lime mainly in the hydroxide form produced by the controlled slaking of quicklime. Hydrated l

44、ime is available as: powder (S); putty (S PL); or slurry or milk of lime (S ML). Dolomitic lime is also produced as semi-hydrated dolomitic lime (S1), mainly consisting of calcium hydroxide and magnesium oxide. 4.4 Calcium lime 4.4.1 Classification of calcium lime Calcium lime shall be classified ac

45、cording to the notation given in Table 1 and its total (CaO + MgO) content in accordance with Table 2. BS EN 459-1:2015EN 459-1:2015 (E) 8 Table 1 Types of calcium lime aDesignation Notation Calcium lime 90 CL 90 Calcium lime 80 CL 80 Calcium lime 70 CL 70 aIn addition, calcium lime is classified ac

46、cording to the form of the product, quicklime (Q), hydrated lime (S), lime putty (S PL) or milk of lime (S ML). Conformity with this classification is assessed by means of statistical quality control as described in Annex A of this European Standard. 4.4.2 Chemical requirements for calcium lime The

47、properties of the type of calcium lime shown in Table 2 determined in accordance with EN 459-2 shall conform to the requirements in that table. All types of calcium lime listed in Table 2 may contain additives in small quantities to improve the manufacture or properties of calcium lime. When the tot

48、al content exceeds 0,1 %, the actual types and amounts shall be declared. Table 2 Chemical requirements of calcium lime given as characteristic values Type of calcium lime Values given as mass fraction in percent CaO + MgO MgOaCO2bSO3Available limecCL 90 90 5 4 2 80 CL 80 80 5 7 2 65 CL 70 70 5 12 2

49、 55 The values for CaO + MgO, MgO, CO2and SO3are applicable to all forms of calcium lime. For quicklime these values correspond to the finished product; for all other forms of lime (hydrated lime, lime putty and milk of lime) the values are based on the product after subtraction of its free water and bound water content. The values for available lime (calcium oxide for quicklime, calcium hydroxide for hydrated lime) refer to the product when tested in accordance with EN 4592. aMgO content up to 7 % is permitted if