BS EN 4658-2010 Aerospace series Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation treated Forgings.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4658:2010Aerospace series Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation treated Forging

2、s a or D null 200 mm Rm null 1 520 MPaLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBS EN 4658:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4658:2010.The UK participation in its preparation was entrust

3、ed to TechnicalCommittee ACE/61/-/15, Steels for Aerospace Purposes.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplicatio

4、n. BSI 2011ISBN 978 0 580 62806 1ICS 49.025.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2011.Amendments issued since publicationDate Text affected

5、Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBS EN 4658:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4658 December 2010 ICS 49.025.10 English Version Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted a

6、nd consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 1 520 MPa Srie arospatiale - Acier FE-PM1507 (X1CrNiMoAlTi12-11-2) - labor sous vide par induction et refondu llectrode consommable - Mis en solution et vieilli - Pices forges et pices matri

7、ces - a ou D 200 mm - Rm 1 520 MPa Luft- und Raumfahrt - Stahl FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lsungsgeglht und ausgelagert - Schmiedestcke - a oder D 200 mm - Rm 1 520 MPa This European Standard was approved by CEN o

8、n 9 July 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may b

9、e obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to

10、the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem

11、bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All righ

12、ts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4658:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBS EN 4658:2010EN 4658:2010 (E) 2 Contents Page Foreword 3Introduction . 41 Scope 52

13、 Normative references 5Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBS EN 4658:2010EN 4658:2010 (E) 3 Foreword This document (EN 4658:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STA

14、N). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the statu

15、s of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of

16、 patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria

17、, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bi

18、n, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBS EN 4658:2010EN 4658:2010 (E) 4 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard

19、 has been prepared in accordance with EN 4500-5. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBS EN 4658:2010EN 4658:2010 (E) 5 1 Scope This standard specifies the requirements relating to: Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) Vacuum induction m

20、elted and consumable electrode remelted Solution treated and precipitation treated Forgings a or D 200 mm Rm 1 520 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition

21、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2043, Aerospace series Metallic materials General requirements for semi-finished product qualification (excluding forgings and castings) 1)EN 4258, Aerospace series Metallic ma

22、terials General organization of standardization Links between types of EN standards and their use EN 4500-5, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 5: Specific rules for steels 1)EN 4670, Aerospace series Steel FE-PM1507 (X1CrNiMoAlTi12-11-

23、2) Vacuum induction melted and consumable electrode remelted Softened Forging stock a or D 300 mmEN 4700-006, Aerospace series Steel and heat resisting alloys Wrought products Technical specification Part 006: Pre-production and production forgings 1) Published as ASD-STAN Prestandard at the date of

24、 publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN) (www.asd-stan.org). Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBS EN 4658:2010EN 4658:2010 (E) 6 Material designation FE-PM1507 (

25、X1CrNiMoAlTi12-11-2) 2 Chemical composition % Element C Si Mn P S Cr Ni Mo Al Ti N2Fe min. 11,0 10,25 1,75 1,35 0,20 base max. 0,015 0,10 0,10 0,010 0,005 12,5 11,25 2,25 1,75 0,50 0,01 3 Method of melting Vacuum induction melted and consumable electrode remelted 4.1 Form Forgings 4.2 Method of prod

26、uction Forged from forging stock EN 4670 4.3 Limit dimension(s) mm a or D 200 5 Technical specification EN 4700-006 6.1 Delivery condition Solution treated Solution treated and precipitation treated Heat treatment 840 C 860 C / 2 h / WQ + Sub-zero to 75 C / 8 h 840 C 860 C / 2 h / WQ + Sub-zero to 7

27、5 C / 8 h + 525 C 545 C / t 8 h / AC 6.2 Delivery condition code W U 7 Use condition Solution treated and precipitation treated Delivery condition Heat treatment Delivery condition + 525 C 545 C / t 8 h / AC Characteristics 8.1 Test sample(s) See EN 4700-006. 8.2 Test piece(s) See EN 4700-006. 8.3 H

28、eat treatment Delivery condition Use condition 9 Dimensions concerned mm a or D 200 a or D 200 a75 a or D 200 a10 Thickness of cladding on each face % 11 Direction of test piece L T 12 T Temperature C Ambient Ambient 13 Proof stress Rp0,2 MPa 1 380 1 380 14 Strength Rm MPa 1 520 1 520 15 Elongation

29、A % 10 10 16 Reduction of area Z % 50 40 17 Hardness 363 HB 426 HB 426 HB 18 Shear strength Rc MPa 19 Bending k 20 Impact strength Notch direction T KV 30 J; ambient Notch direction L KV 25 J; ambient 21 C Temperature C 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupture stress R MPa 26 Elongatio

30、n at rupture A % 27 Notes (see line 98) aLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBS EN 4658:2010EN 4658:2010 (E) 7 30 Microstructure 1See EN 4700-006. 2 One per cast. 3 Corresponding to ingot top. 7 The ferrite content shall not exceed 2 %.

31、34 Grain size See EN 4700-006. 7 G 6, some 5 accepted. 44 External defects See EN 4700-006. 1 Visual. 50 Cleanliness / inclusion content (micro-cleanness) 1 EN 4700-006 7 Category 5 51 Macrostructure See EN 4700-006. 7 Class Condition Severity 1 Freckles A 2 White spots A 3 Radial segregation A 4 Ri

32、ng pattern B 61 Internal defects See EN 4700-006. 6 a or D 100 mm may be tested either on the product or at an earlier stage of manufacturing. 7 Class 5 95 Marking inspection See EN 4700-006. 96 Dimensional inspection See EN 4700-006. 98 Notes a 75 mm a or D 200 mm may be tested in L or T direction.

33、 99 Typical use Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBS EN 4658:2010EN 4658:2010 (E) 8 100 Product qualification See EN 2043. Qualification programme to be agreed between manufacturer and purchaser. Licensed Copy: Wang Bin, ISO/EXCHANGE C

34、HINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSIBSI is the independent national body responsible for preparing British Standards. It presents the UK view on

35、 standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revisio

36、n. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products andservices. We would be grateful if anyone finding an inaccuracy orambiguity while using this British Standard would inform the Secre

37、tary ofthe technical committee responsible, the identity of which can be foundon the inside front cover.Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400BSI offers members an individual updating service called PLUS whichensures that subscribers automatically receive the latest editions ofstandards.B

38、uying standardsOrders for all BSI, international and foreign standards publicationsshould be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: You may also buy directly using a debit/credit card from the BSI Shopon the website response to orders for internat

39、ional standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library.Various BSI electr

40、onic information services are also available which givedetails on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standardsdevelopments and receive substantial discounts on the

41、 purchase priceof standards. For details of these and other benefits contact MembershipAdministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on

42、 the BSI website CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of thepublications of the international standardization bodies. Except as permitted under theCopyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrievalsyste

43、m or transmitted in any form or by any means electronic, photocopying, recording orotherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard of necessarydetails such as symbols, and size, type or grade designations. If these

44、details are to be used forany other purpose than implementation then the prior written permission of BSI must beobtained. Details and advice can be obtained from the Copyright & Licensing Manager.Tel: +44 (0)20 8996 7070 Email: WB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 2Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 18/04/2011 03:47, Uncontrolled Copy, (c) BSI