BS EN 4700-003-2010 Aerospace series Steel and heat resisting alloys Wrought products Technical specification Tube《航空航天系列 钢和耐热合金 锻制产品 技术规范 管》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4700-003:2010Aerospace series Steeland heat resisting alloys Wrought products TechnicalspecificationPart 003: TubeBS EN 4700-003:2010 BRITISH STANDARDNational forewordThis

2、British Standard is the UK implementation of EN 4700-003:2010.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/61/-/48, Heat Resisting Alloys for AerospacePurposes.A list of organizations represented on this committee can beobtained on request to its secretary.This pub

3、lication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 53328 0ICS 49.025.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the a

4、uthority of theStandards Policy and Strategy Committee on 31 October 2010.Amendments issued since publicationDate Text affectedBS EN 4700-003:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4700-003 September 2010 ICS 49.025.10 English Version Aerospace series - Steel and heat resisting all

5、oys - Wrought products - Technical specification - Part 003: Tube Srie arospatiale - Aciers et alliages rsistant chaud - Produits corroys - Spcification technique - Partie 003: Tubes Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen -

6、Teil 003: Rohre This European Standard was approved by CEN on 9 January 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl

7、iographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility

8、 of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ic

9、eland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Aven

10、ue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4700-003:2010: EBS EN 4700-003:2010EN 4700-003:2010 (E) 2 Contents Page Foreword 3Introduction .41 Scope 42 Normative references 43 Terms and defini

11、tions .64 Wording of order 65 Health and safety .66 Technical requirements 66.1 General 66.2 Qualification requirements .76.3 Release requirements .76.3.1 Release tests 76.3.2 Retests 76.3.3 Rejection .86.3.4 Special tests .86.3.5 Capability clause86.3.6 Statistical process control 86.3.7 Inspection

12、 and test report .86.4 Traceability .8BS EN 4700-003:2010EN 4700-003:2010 (E) 3 Foreword This document (EN 4700-003:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules o

13、f this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

14、by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for i

15、dentifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

16、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 4700-003:2010EN 4700-003:2010 (E) 4 Introduction This European Standard is part of the

17、 series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. 1 Scope This European Standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy tube. It sh

18、all be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the e

19、dition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 643, Steels Micrographic determination of the apparent grain size (ISO 643:2003) EN ISO 8492, Metallic materials Tube Flattening test (ISO 8492:1998) EN ISO 8493, Me

20、tallic materials Tube Drift-expanding test (ISO 8493:1998) EN ISO 3651-1, Determination of resistance to intergranular corrosion of stainless steels Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (I

21、SO 3651-1:1998) EN ISO 3651-2, Determination of resistance to intergranular corrosion of stainless steels Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels Corrosion test in media containing sulfuric acid (ISO 3651-2:1998) EN ISO 3887, Steels Determination of depth of de

22、carburization (ISO 3887:2003) EN ISO 6506-1, Metallic materials Brinell hardness test Part 1: Test method (ISO 6506-1:2005) EN ISO 6507-1, Metallic materials Vickers hardness test Part 1: Test method (ISO 6507-1:2005) EN ISO 6508-1, Metallic materials Rockwell hardness test Part 1: Test method (scal

23、es A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005) EN ISO 6892-1, Metallic materials Tensile testing Part 1: Method of test at room temperature (ISO 6892-1:2009) prEN ISO 6892-2, Metallic materials Tensile testing Part 2: Method of test at elevated temperature (ISO/DIS 6892-2:2009) EN 2002-001, A

24、erospace series Metallic materials Test methods Part 001: Tensile testing at ambient temperature EN 2002-002, Aerospace series Metallic materials Test methods Part 002: Tensile testing at elevated temperature BS EN 4700-003:2010EN 4700-003:2010 (E) 5 EN 2002-005, Aerospace series Test methods for me

25、tallic materials Part 005: Uninterrupted creep and stress-rupture testing EN 2002-17, Aerospace series Metallic materials Test methods Part 17: Integrity test 1)EN 2002-18, Aerospace series Metallic materials Test methods Part 18: Hydraulic distension test for tube 1)EN 2002-20, Aerospace series Met

26、allic materials Test methods Part 20: Eddy current testing of circular cross-section tubes 1)EN 2032-1, Aerospace series Metallic materials Part 1: Conventional designation EN 2032-2, Aerospace series Metallic materials Part 2: Coding of metallurgical condition in delivery condition EN 2078, Aerospa

27、ce series Metallic materials Manufacturing schedule, inspection schedule, inspection and test report Definition, general principles, preparation and approval EN 2950, Aerospace series Test method Wrought heat resisting alloys Semi-finished products and parts Conditions for macrographic and micrograp

28、hic examination Atlas of structures and defects EN 2951, Aerospace series Metallic materials Test method Micrographic determination of content of non-metallic inclusions 1)EN 3718, Aerospace series Test method for metallic materials Ultrasonic inspection of tubes1)EN 4258, Aerospace series Metallic

29、materials General organization of standardization Links between types of EN standards and their use EN 4259, Aerospace series Metallic materials Definition of general terms 1)EN 9100, Quality Management Systems Requirements for Aviation, Space and Defence Organizations EN 9133, Aerospace series Qual

30、ity management systems Qualification procedure for aerospace standard parts EN 10027-1, Designation systems for steels Part 1: Steel names EN 10079, Definition of steel products TR 2410, Aerospace series Metallic materials Relationship between dimensional standards and material standards 2)AMS 2315,

31、 Determination of Delta Ferrite Content 3)AMS 2750, Pyrometry 3)1) Published as ASD-STAN Prestandard at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). 2) Published as ASD-STAN Technical Report at the

32、date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). 3) Published by: SAE National (US) Society of Automotive Engineers http:/www.sae.org/ BS EN 4700-003:2010EN 4700-003:2010 (E) 6 ASTM A604, Standard Practice

33、for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets 4)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4259 apply. For definitions specific to steel, see EN 10079. 3.1 batch for heat treatment using a continuous furnace, a con

34、tinuous run of less than or equal to 8 hours may be considered as the same heat treatment charge 4 Wording of order The order shall clearly indicate: quantities to be supplied; dates of delivery; material standard number; delivery condition and metallurgical code of products; dimensions and toleranc

35、es or reference to an appropriate dimensional standard; product designation, when required; forwarding address; nature and type of packing, if required; surface protection, if appropriate; definition and frequency of any special tests and their retest procedures, if required. 5 Health and safety The

36、 product in the delivery condition shall fulfil the current health and safety laws of the area of the country where it is to be delivered. A product safety data sheet shall be available. 6 Technical requirements 6.1 General The product shall be manufactured in accordance with the requirements of the

37、 relevant material standard and the applicable requirements of this specification. A manufacturing schedule shall be established and applied in accordance with EN 2078. Product shall satisfy the requirements of the material standard and/or order and shall be free from irregularities prejudicial to t

38、he subsequent manufacture or use of this product. 4) Published by: ASTM National (US) American Society for Testing and Materials http:/www.astm.org/ BS EN 4700-003:2010 EN 4700-003:2010 (E) 7 Notwithstanding previous acceptance complying with this material standard, any product that is found, at a l

39、ater stage, to contain such defects shall be rejected. Unless otherwise specified, the requirements in Tables 1 and 2 shall apply in conjunction with those of the relevant material standard. Table 1 relates to lines 1 to 29 (inclusive) of the material standard and Table 2 relates to lines 30 onwards

40、 in which the sub-line format is also used. Lines 2 to 98 may also be opened in line 100 if the material standard details specific qualification requirements. If a specific line number is not shown in Tables 1 and 2, the requirement is stated in the material standard and/or order. 6.2 Qualification

41、requirements Qualification requirements when invoked by the material standard and/or order are detailed in Tables 1 and 2. Unless otherwise agreed between the manufacturer and purchaser the qualification phase shall be run on the first 3 batches, coming from at least 2 casts. 6.3 Release requirement

42、s 6.3.1 Release tests Release testing shall be the responsibility of the manufacturer. The purchaser reserves the right to perform any of the inspections and/or tests required by the material standard and/or order. The test samples shall be representative of the product. When required by the order,

43、the manufacturer shall inform the purchaser of the planned dates for extraction of samples and release testing in order that these operations may be witnessed. Tables 1 and 2 detail the requirements for each line of the material standard. Unless otherwise specifically requested by the purchaser, a p

44、articular inspection and/or test for release shall be carried out if corresponding acceptance criteria and/or values are stated in the applicable material standard, but see also in 6.3.5. 6.3.2 Retests If any requirement is not met, retests shall be carried out under the following conditions unless

45、otherwise stated in the material standard or order. If the test procedure or test piece preparation is faulty, testing shall be re-applied at the original frequency after rectification of the original cause of failure, on a test sample located near the first one. For tube with hardness results below

46、 the minimum or above the maximum value, the softest or hardest tube, as appropriate, shall be submitted to a tensile test. If the results comply with the specified tensile requirements, all tube shall be accepted. When failure cannot be attributed to faulty testing, or test piece preparation, furth

47、er test samples shall be selected at twice the original frequency from the product, one of which shall be that on which the original results were obtained unless already withdrawn by the manufacturer after suitable identification of the cause of failure. If all retest results are satisfactory, the b

48、atch shall be accepted. If one or more tests are unsatisfactory, the batch shall be: rejected, or 100 % retested and the conforming products accepted, or partially or fully re-heat treated if heat treatment can rectify the cause of the failure and tested as a completely new batch except for chemical

49、 composition and cleanness inspection. The reheat treatment shall be stated on the release test certificate. For cleanness inspection, if the material fails the requirement the product may be cut back before retesting. BS EN 4700-003:2010 EN 4700-003:2010 (E) 8 For deformation under pressure, test samples from 25 % of the tubes in the batch shall be tested. All samples shall me