BS EN 572-9-2004 Glass in building - Basic soda lime silicate glass products - Evaluation of conformity Product standard《建筑用玻璃 基本的钠钙玻璃制品 合格评价 产品标准》.pdf

1、BRITISH STANDARD BS EN 572-9:2004 Glass in building Basic soda lime silicate glass products Part 9: Evaluation of conformity/Product standard The European Standard EN 572-9:2004 has the status of a British Standard ICS 81.040.20 BS EN 572-9:2004 This British Standard was published under the authorit

2、y of the Standards Policy and Strategy Committee on 14 October 2004 BSI 14 October 2004 ISBN 0 580 44593 3 National foreword This British Standard is the official English language version of EN 572-9:2004. The UK participation in its preparation was entrusted by Technical Committee B/520, Glass and

3、glazing in building, to Subcommittee B/520/1, Glass and glazing in building Basic and transformed glass products, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implem

4、ent international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does

5、 not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European

6、 committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages

7、2 to 41 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN5729 October2004 ICS81.040.20 Englishversion GlassinbuildingBasicsodal

8、imesilicateglassproductsPart 9:Evaluationofconformity/Productstandard VerredanslaconstructionVerredesilicatesodocalcique debasePartie9:Evaluationdelaconformit GlasimBauwesenBasiserzeugnisseausKalk NatronsilicatglasTeil9:Konformittsbewertung ThisEuropeanStandardwasapprovedbyCENon27May2004. CENmembers

9、areboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember.

10、 ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgi

11、um,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EURO

12、PISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN5729:2004:EEN 572-9:2004 (E) 2 Contents Foreword4 1 Scope.5 2 Normative references . 5 3 Terms and definitions. 6 4 Requiremen

13、ts 6 4.1 Conformity with the definition of basic soda lime silicate glass products. 6 4.2 Determination of the characteristics performances. 6 4.2.1 Characteristics of basic soda lime silicate glass 6 4.2.2 Determination of essential characteristics of basic soda lime silicate glass products. 7 4.3

14、Durability 9 4.4 Characteristics other than those listed in 4.2 9 4.5 Dangerous substances. 9 5 Evaluation of conformity 10 5.1 General. 10 5.2 Initial type testing of the product (see 5.1, 2). 10 5.2.1 General. 10 5.2.2 Initial type testing if the product belongs to the group soda lime silicate gla

15、ss, clear or tinted 11 5.2.3 Initial type testing of characteristics performances. 12 5.3 Factory production control and inspection of samples in accordance with a prescribed test plan (see 5.1, 1a and b) 12 5.4 Initial inspection of factory and of factory production control (see 5.1, 1c). 12 5.5 Co

16、ntinuous surveillance and assessment of the factory production control (see 5.1, 1c) 13 6 Marking and/or labelling. 14 6.1 General. 14 6.2 Product marking 14 6.3 Product characteristics 14 6.4 “Characteristics/performance identification paper” . 14 Annex A (normative) Factory production control 15 A

17、.1 Factory Production Control Requirements 15 A.1.1 General. 15 A.1.2 Organisation 15 A.1.3 Control system 15 A.2 Marking 16 A.3 Inspection and testing tables of soda lime silicate glass products production 17 A.3.1 Information on tables A.1 to A.7 17 A.3.2 Use of proxy testing 17 Annex B (informati

18、ve) Provisions for voluntary involvement of third party(ies) . 32 B.1 General. 32 B.2 Voluntary tasks for third parties 32 B.3 Marking and labelling . 32 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Directive. 33 EN 572-9:2004 (E) 3 Z

19、A.1 Scope and relevant characteristics. 33 ZA.2 Procedure(s) for the attestation of conformity of basic soda lime silicate glass products. 35 ZA.2.1 System(s) of attestation of conformity . 35 ZA.2.2 EC Certificate and Declaration of conformity 37 ZA.3 CE marking and labelling . 39 Bibliography . 41

20、 EN 572-9:2004 (E) 4 Foreword This document (EN 572-9:2004) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endo

21、rsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by July 2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive

22、(s). For relationship with EU Directive(s), see informative Annex ZA, B, C or D, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belg

23、ium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. No existing document is superseded This p

24、art of the document does not stand-alone, it is a part of one document: EN 572-1: Glass in building Basic soda lime silicate glass products Part 1:Definition and general physical and mechanical properties EN 572-2: Glass in building Basic soda lime silicate glass products - Part 2: Float glass EN 57

25、2-3: Glass in building Basic soda lime silicate glass products Part:3 Polished wired glass EN 572-4: Glass in building Basic soda lime silicate glass products Part 4: Drawn sheet glass EN 572-5: Glass in building Basic soda lime silicate glass products- Part 5: Patterned glass EN 572-6: Glass in bui

26、lding Basic soda lime silicate glass products- Part 6: Wired patterned glass EN 572-7: Glass in building Basic soda lime silicate glass products Part 7: Wired or unwired channel shaped glass EN 572-8: Glass in building Basic soda lime silicate glass products Part 8: Supplied and final cut sizes EN57

27、2-9: Glass in building Basic soda lime silicate glass products- Part 9 Evaluation of conformity/Product standard This part of this document details the evaluation of conformity, which includes initial type testing of the essential characteristics, initial type testing if the product belongs to the i

28、ntended product group, and the organisation of the factory production control, and is in line with the draft Mandate for flat glass, profiled glass and glass block products. This document contains other aspects of importance of trade. EN 572-9:2004 (E) 5 1 Scope This document covers the evaluation o

29、f conformity and the factory production control of basic soda lime silicate glass products for use in buildings. Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply. 2 Normative references The fol

30、lowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356, Glass in building - Security glazing - Testing a

31、nd classification of resistance against manual attack EN 410, Glass in building - Determination of luminous and solar characteristics of glazing EN 572-1, Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties EN 572-2, Glass

32、in building - Basic soda lime silicate glass products - Part 2 Float glass EN 572-3, Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass EN 572-4, Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass EN 572-5, Glass in buildin

33、g - Basic soda lime silicate glass products - Part 5: Patterned glass EN 572-6, Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass EN 572-7, Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass EN 572-8,

34、Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes EN 673, Glass in building Determination of thermal transmittance (U value) Calculation method EN 1063, Glass in building - Security glazing - Testing and classification of resistance against bullet att

35、ack EN 12600, Glass in building - Pendulum test - Impact test method and classification for flat glass EN 12758, Glass in building - Glazing and airborne sound insulation Product descriptions and determination of properties prEN 13474, Glass in building - Design of glass panes EN 13501-1, Fire class

36、ification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN 572-9:2004 (E) 6 EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ven

37、tilation services prEN 13501-5, Fire classification of construction products and building elements - Part 5: Classification using data from fire exposure roof tests EN 13541, Glass in building - Security glazing - Testing and classification of resistance against explosion pressure 3 Terms and defini

38、tions For the purposes of this document, the terms and definitions in EN 572 1, 2, 3, 4, 5, 6, 7 and 8 and the following apply. 3.1 initial type testing determination of the performance of a product (characteristic, durability), on the basis of either actual tests or other procedures (such as conven

39、tional, standardised, tabulated or general accepted values, standardised or recognised calculation methods, test reports when made available,), in accordance with this document that demonstrates compliance with this document 3.2 test report document that covers the results of tests undertaken on a r

40、epresentative sample of the product from production or on a prototype design of the product 3.3 product description document that details the relevant parameters, e.g. process conditions, structure, etc., for defining a product that complies with the standard. It includes specific reference(s) to ch

41、aracteristics that are modified by the production process 3.4 significant change variation in performance beyond the permitted tolerance for the characteristic 4 Requirements 4.1 Conformity with the definition of basic soda lime silicate glass products Products shall conform to the definition and fu

42、lfil the requirements of basic soda lime silicate glass products as defined in EN 572-1. 4.2 Determination of the characteristics performances 4.2.1 Characteristics of basic soda lime silicate glass Basic soda lime silicate glass products are made in accordance with EN 572-1 and one of the other Par

43、ts: EN 572-2, EN 572-3, EN 572-4, EN 572-5, EN 572-6, or EN 572-7. The characteristics listed in Table 1, concern general accepted values, calculated values or measured values. EN 572-9:2004 (E) 7 Table 1: Necessary information on characteristics of basic soda lime silicate glass Characteristic Symb

44、ol Unit Generally accepted values: - density - hardness - Youngs modulus - Poissons ratio - Characteristic bending strength - Resistance against sudden temperature changes and temperature differentials - Specific heat capacity - Coefficient of linear expansion - Thermal conductivity (for U-value) -

45、Mean refractive index to visible radiation - Emissivity HK 0,1/20 E f g,k c n kg/m GPa Pa Dimensionless Pa K J/(kg.K) K -1W/(m.K) Dimensionless Dimensionless Measured values: - light transmittance - solar direct transmittance v eDimensionless Dimensionless Calculated values: - total solar energy tra

46、nsmittance g Dimensionless 4.2.2 Determination of essential characteristics of basic soda lime silicate glass products If the basic soda lime silicate glass manufacturer wishes to claim that any performance characteristic is independent of the production equipment used then the factory production co

47、ntrol system shall be in accordance with this document including his specific process control conditions. 4.2.2.1 Safety in the case of fire - Resistance to fire Fire resistance shall be determined and classified in accordance with EN 13501-2. Note: EN 357 may be used as a classification reference s

48、pecific to fire resistant glazed elements. 4.2.2.2 Safety in the case of fire - Reaction to fire Reaction to fire shall be determined and classified in accordance with EN 13501-1. Basic soda lime silicate glass products are products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1* according to Commission Decision 96/603/EC, as amended 2000/605/EC) EN 572-9:2004 (E) 8 4.2.2.3 Safety in the case of fire - External fire behaviour