BS EN 621-2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW without a fan to assist transportation of combustion .pdf

1、BS EN 621:2009ICS 97.100.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDNon-domestic gas-fired forced convectionair heaters for spaceheating not exceedinga net heat input of 300kW, without a fan toassist transportation ofcombustion air and/orcombustion produc

2、tsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/05/2010 04:05, Uncontrolled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 58602 6Amendments/corrigenda issued since publicationDa

3、te CommentsBS EN 621:2009National forewordThis British Standard is the UK implementation of EN 621:2009. Itsupersedes BS EN 621:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GSE/20, Non-domestic space heaters (gas).A list of organizations represe

4、nted on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy:

5、Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/05/2010 04:05, Uncontrolled Copy, (c) BSIBS EN 621:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 621 November 2009 ICS 97.100.20 Supersedes EN 621:1998English Version Non-domestic gas-fired forced convection air heaters for space heating not exce

6、eding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products Gnrateurs dair chaud convection force utilisant les combustibles gazeux pour le chauffage de locaux autres que lhabitat individuel, de dbit calorifique sur Hi infrieur ou gal 300 kW,

7、 sans ventilateur pour aider lalimentation en air comburant et/ou lvacuation des produits de combustion Gasbefeuerte Warmlufterzeuger mit erzwungener Konvektion zum Beheizen von Rumen fr den nicht-huslichen Gebrauch mit einer Nennwrmebelastung nicht ber 300 kW, ohne Geblse zur Befrderung der Verbren

8、nungsluft und/oder der Abgase This European Standard was approved by CEN on 10 October 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date

9、 lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the

10、 responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hunga

11、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre

12、: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 621:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/05/2010 04:05, Uncontrolled Copy, (c) BSIBS EN 621:2009EN 621:2009 (E) 2

13、Contents Page Foreword . 41 Scope . 52 Normative references . 53 Terms and definitions. 73.1 Appliance and its constituent parts 73.2 Adjustment, control and safety devices . 93.3 Operation of the appliance 113.4 Gases . 143.5 Conditions of operation and measurement . 153.6 Marking of the appliance

14、and packaging . 164 Classification . 164.1 Classification of gases . 164.2 Classification of appliances according to the gases capable of being used . 174.3 Classification of appliances according to the mode of evacuation of the combustion products . 185 Construction and design requirements 195.1 Ge

15、neral . 195.2 Adjusting, control and safety devices 255.3 Ignition devices . 285.4 Flame supervision system . 295.5 Start-gas flame establishment . 305.6 Main flame establishment 315.7 Main burner . 325.8 Facility for remote control . 325.9 Thermostats and control of air temperature 325.10 Combustio

16、n chamber pressure reliefs . 335.11 Facilities for commissioning and testing 336 Operational requirements 346.1 Safety of operation . 346.2 Efficiency . 387 Test methods . 397.1 General . 397.2 Construction and design . 467.3 Safety of operation . 477.4 Efficiency . 698 Marking and instructions . 75

17、8.1 Marking of the appliance 758.2 Marking of the packaging 768.3 Utilization of symbols on the appliance and packaging . 768.4 Instructions . 789 Evaluation of POCED conformity and their associated terminals . 809.1 General . 809.2 Type testing . 809.3 Factory production control (FPC) . 81Annex A (

18、informative) National situations 83A.1 General . 83A.2 Categories listed in the body of the standard and marketed in different countries 83Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/05/2010 04:05, Uncontrolled Copy, (c) BSIBS EN 621:2009EN 621:2009 (E) 3 A.3 Appliance supply pressures

19、 corresponding to the categories given in A.2 . 85A.4 Special categories marketed nationally or locally . 86A.5 Test gases corresponding to the special categories given in A.4 . 90A.6 Gas connections in the various countries 91A.7 Flue connections in the various countries . 93Annex B (informative) E

20、quivalence rules 94B.1 Conversion to categories within a restricted Wobbe index range . 94B.2 Conversion to categories within an identical Wobbe index range . 94B.3 Conversion to categories within a wider Wobbe index range 95Annex C (informative) Facilities for commissioning and testing 96C.1 Applia

21、nces with automatic ignition of a start-gas flame . 96C.2 Appliances with direct automatic ignition of the main burner . 96Annex D (informative) Identification of gas types in use in various countries . 97Annex E (informative) A-deviations 98E.1 General . 98E.2 Switzerland . 98Annex F (normative) Sp

22、ecial national conditions 99F.1 General . 99F.2 Belgium . 99F.3 Italy 99Annex G (informative) National solutions for countries whose national bodies are Affiliate Members of CEN . 100G.1 Categories listed in the body of the standard and marketed in different countries . 100G.2 Appliance supply press

23、ures corresponding to the categories given in G.1 . 100G.3 Special categories marketed nationally or locally . 100G.4 Gases and test pressures corresponding to the special categories given in G.3 100Annex H (informative) Calculation of conversions of NOx 101Annex I (informative) An example of a samp

24、ling plan . 102I.1 Sampling plans 102I.2 Inspection levels and procedures 103Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 90/396/EEC . 104Annex ZB (informative) Clauses of this European Standard addressing the provisions of the EU

25、Construction Products Directive . 106ZB.1 Scope and relevant characteristics . 106ZB.2 Procedure(s) for attestation of conformity of construction products . 108ZB.3 CE marking and labelling 110Bibliography 112Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/05/2010 04:05, Uncontrolled Copy,

26、 (c) BSIBS EN 621:2009EN 621:2009 (E) 4 Foreword This document (EN 621:2009) has been prepared by Technical Committee CEN/TC 180 “Domestic and non-domestic gas fired air heaters and non-domestic overhead radiant heaters”, the secretariat of which is held by AFNOR. This European Standard shall be giv

27、en the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the

28、subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 621:1998. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and support

29、s essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. This revision modifies EN 621:1998. It has been prepared to incorporate requirements for combustion products evacuation ducts, POCEDs, sup

30、plied as an integral part of the system to support the EU Directive 89/106/EEC on construction products under mandate M105. To this end it extends the scope of the standard to cover Type B41 appliances. Furthermore, the opportunity presented by this revision has been taken to update the standard in

31、respect to EN 437:2003. NOTE For countries requesting special categories (specified in EN 437:2003), the absence of specific information concerning A.4.3 and A.4.4 implies that the general requirements described in the body of the standard (see 5.1.1, 5.2.2, 5.2.3 and 5.2.5) also apply to these spec

32、ial categories. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

33、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/05/2010 04:05, Uncontrolled Copy, (c) BSIBS EN 621:2009EN 621:2009 (E

34、) 5 1 Scope This European Standard specifies the requirements and test methods for the safety and efficiency of non-domestic gas-fired air heaters not exceeding a net heat input of 300 kW with (an) atmospheric burner(s) and without a fan to assist the transportation of combustion air and/or flue gas

35、es, hereafter referred to as “appliances“. This European Standard applies to Type B11, B41, C11and C31appliances intended for use in other than single unit residential dwellings. Provision of the heated air may be by means of ducting or may be directly into the heated space. This standard does not a

36、pply to: a) appliances intended for use in a single unit residential dwelling; b) appliances of the condensing type; c) appliances for outdoor installation; d) dual purpose air conditioning appliances (heating and cooling); e) appliances where the air is heated by an intermediate fluid; f) appliance

37、s with forced draught burners; g) appliances fitted with a manual or automatic means of adjusting the combustion air supply or the combustion products evacuation (including flue dampers); h) portable or transportable forced convection appliances; i) appliances having multiple heating units with a si

38、ngle draught diverter; j) appliances fitted with more than one flue outlet; k) appliances that are designed for continuous condensation within the flue system under normal operating conditions; l) appliances having combustion products evacuation ducts, POCEDs, that are non-metallic. This standard is

39、 applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals. NOTE Requirements for appliances which are not type

40、 tested would need to be subject to further consideration. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (in

41、cluding any amendments) applies. EN 88-1, Pressure regulators and associated safety devices for gas appliances Part 1: Pressure regulators for inlet pressures up to and including 500 mbar EN 125, Flame supervision devices for gas burning appliances Thermoelectric flame supervision devices Licensed C

42、opy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/05/2010 04:05, Uncontrolled Copy, (c) BSIBS EN 621:2009EN 621:2009 (E) 6 EN 126, Multifuctional controls for gas burning appliances EN 161:2007, Automatic shut-off valves for gas burners and gas appliances EN 257, Mechanical thermostats for gas-burning

43、 appliances EN 298:2003, Automatic gas burner control systems for gas burners and gas burning appliances with or without fans EN 437:2003, Test gases Test pressures Appliance categories EN 1859:2000, Chimneys Metal chimneys Test methods EN 10226-1, Pipe threads where pressure tight joints are made o

44、n the threads Part 1: Taper external threads and parallel internal threads Dimensions, tolerances and designation EN 10226-2, Pipe threads where pressure tight joints are made on the threads Part 2: Taper external threads and taper internal threads Dimensions, tolerances and designation EN 60335-1,

45、Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2001, modified) EN 60335-2-102, Household and similar electrical appliances Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections (IEC 60335-

46、2-102:2004, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) EN 60584-1, Thermocouples Part 1: Reference tables (IEC 60584-1:1995) EN 60584-2:1993, Thermocouples Part 2: Tolerances (IEC 60584-2:1982 + A1:1989) EN 60730-1, Automatic electrical controls

47、for household and similar use Part 1: General requirements (IEC 60730- 1:1999, modified) EN 60730-2-9:2002, Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2000, modified) EN 61058-1, Switches for appliance

48、s Part 1: General requirements (IEC 61058-1:2000 + A1:2001, modified) EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) ISO 1182, Reaction to fire tests for building products Non-combustibility test ISO

49、7005-1, Metallic flanges Part 1: Steel flanges ISO 7005-2, Metallic flanges Part 2: Cast iron flanges ISO 7005-3, Metallic flanges Part 3: Copper alloy and composite flanges CR 1404, Determination of emissions from appliances burning gaseous fuels during type-testing Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 10/05/2010 04:05, Uncontro