BS EN 687-2011 Resilient floor coverings Specification for plain and decorative linoleum on a corkment backing《弹性地板覆盖物 软木衬底的普通和装饰油毡的规格》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 687:2011Resilient floor coverings Specification for plain and decorative linoleum on a corkment backingBS EN 687:2011 BRITISH STANDARDNational forewordThis British Standard

2、 is the UK implementation of EN 687:2011. It supersedes BS EN 687:1997, which is withdrawn.The UK participation in its preparation was entrusted to T e c h n i c a l C o m m i t t e e P R I / 6 0 , R e s i l i e n t f l o o r c o v e r i n g s .A list of organizations represented on this committee c

3、an be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 72227 1 ICS 97.150 Compliance with a British Standard cannot confer immunity from legal oblig

4、ations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2011.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 687:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 687 April 2011 ICS 97.150 Supersedes EN 687:1

5、997English Version Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing Revtements de sol rsilients - Spcifications pour le linolum uni et dcoratif sur support en composition de lige Elastische Bodenbelge - Spezifikation fr Linoleum mit und ohne Muster mi

6、t Korkmentrcken This European Standard was approved by CEN on 10 March 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibli

7、ographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons

8、ibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gree

9、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Manageme

10、nt Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 687:2011: EBS EN 687:2011EN 687:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .54 Ident

11、ification .55 Requirements .55.1 General requirements 55.2 Classification requirements 76 Marking .8Annex A (informative) Optional properties .9Bibliography . 10BS EN 687:2011EN 687:2011 (E) 3 Foreword This document (EN 687:2011) has been prepared by Technical Committee CEN/TC 134 “Resilient, textil

12、e and laminate floor coverings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the

13、 latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 687:1997. According to the CEN/CE

14、NELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua

15、nia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 687:2011EN 687:2011 (E) 4 1 Scope This European Standard specifies the characteristics of plain and decorative linoleum on a corkment backing as a comp

16、ound floor covering, supplied in roll form. To encourage the consumer to make an informed choice, the standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for mark

17、ing. The term “linoleum“ is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are not included in this European Standard. 2 Normative references The following referenced documents are indispensable for the application o

18、f this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 425, Resilient and laminate floor coverings Castor chair test EN 426, Resilient floor coverings Determination of width,

19、length, straightness and flatness of sheet material EN 428, Resilient floor coverings Determination of overall thickness EN 429, Resilient floor coverings Determination of the thickness of layers EN 430, Resilient floor coverings Determination of mass per unit area EN 433, Resilient floor coverings

20、Determination of residual indentation after static loading EN 435, Resilient floor coverings Determination of flexibility EN 670, Resilient floor coverings Identification of linoleum and determination of cement content and ash residue EN 685, Resilient, textile and laminate floor coverings Classific

21、ation EN ISO 105-B02, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994, including amendment 1:1998) BS EN 687:2011EN 687:2011 (E) 5 3 Terms and definitions For the purposes of this document, the following terms and definit

22、ions apply. 3.1 linoleum cement binder in linoleum, consisting of a mixture of linseed oil and/or other vegetable drying oils, rosin and drying oil catalysts, which is converted to a semi-elastic mass by an oxidative curing process 3.2 linoleum with corkment backing product produced by calendering a

23、 homogeneous mixture of linoleum cement, cork and/or woodflour, pigments and inorganic filler onto a corkment backing NOTE The product is then converted into its final form by an oxidative curing process. 3.3 corkment backing or underlay produced by calendering a homogeneous mixture of linoleum ceme

24、nt, granulated cork, pigments and inorganic fillers on a fibrous backing NOTE 1 The product is then converted into its final form by an oxidative curing process. NOTE 2 The only chemical cross-linking bondings in linoleum will be those which are formed during the oxidation process. 4 Identification

25、Linoleum shall be identified by its ability to be disintegrated in 0,5 mol/l potassium hydroxide/methanol solution and by the determination of cement content and ash residue. The minimum amount of linoleum cement shall be 30 % when tested in accordance with EN 670. The maximum amount of inorganic fi

26、ller (ash residue) shall be 50 % when tested in accordance with EN 670. Corkment shall be identified by its ability to be disintegrated in 0,5 mol/l potassium hydroxide/methanol solution. 5 Requirements 5.1 General requirements All classes of linoleum on corkment backing shall comply with the approp

27、riate general requirements specified in Table 1, when tested in accordance with the methods given therein. BS EN 687:2011EN 687:2011 (E) 6 Table 1 General requirements Property Requirement Test method Rolls Length m width mm Not less than the nominal values EN 426 Overall thickness mm Nominal value

28、Average Individual values 4,0 Nominal value 0,20 Nominal value 0,25 EN 428 Thickness of linoleum compositionmAverage Individual values Nominal value 0,15 Nominal value 0,20 EN 429 Mass per unit area g/m2Average Nominal value 10 % EN 430 Residual indentation after static loading mmAverage 0,40 EN 433

29、 Flexibility around a mandrel of diameter 60 mm Shall show no signs of cracking EN 435 Method A Colour fastness to artificial light 6 minimum EN ISO 105-B02 Method 31)Effect of a castor chair No damage shall be apparent. EN 425 1)Before comparing the test piece, expose the reference sample together

30、with the Blue Wool cloth to the xenon arc lamp, until a contrast is produced on Blue Wool Reference 2 equal to the contrast illustrated by Grey Scale 3. This step is necessary to remove the inherent stove yellowing of linoleum before the stable colouration is achieved. BS EN 687:2011EN 687:2011 (E)

31、7 5.2 Classification requirements The classification scheme for resilient floor coverings is described in EN 685. The requirements for plain and decorative linoleum on a corkment backing in accordance with this scheme, are related to the nominal thickness of the linoleum composition, as shown in Tab

32、le 2. Table 2 Classification Class Symbol Level of use Nominal thickness of the surface layer 21 domestic moderate 1,5 22 domestic general 22+ domestic general 23 domestic heavy 31 commercial moderate 1,5 32 commercial general 33 commercial heavy 2,0 41 light industrial moderate BS EN 687:2011EN 687

33、:2011 (E) 8 6 Marking Floor coverings of plain and decorative linoleum on a corkment backing and/or their packaging shall bear the following marking: a) number and date of this European Standard, i.e. EN 687:2011; b) manufacturers or suppliers identification; c) product name; d) colour/pattern, and

34、batch and roll number; e) classes/symbols appropriate for the product; f) length, width and thickness of rolls. BS EN 687:2011EN 687:2011 (E) 9 Annex A (informative) Optional properties Where the following properties are required for specific applications, the floor covering should be tested in acco

35、rdance with the appropriate methods. electrical resistance (see EN 1081); effect of stains (see EN 423); cigarette resistance (see EN 1399). In general use, a linoleum floor covering, depending on the colour and/or pattern, is expected to have the following rating when tested in accordance with EN 1

36、399: Method A, stubbed cigarettes; rating 4 or higher; Method B, burning cigarettes; rating 3 or higher; electrostatic propensity (see EN 1815); sound insulation (see EN ISO 10140-3 and EN ISO 717-2). BS EN 687:2011EN 687:2011 (E) 10 Bibliography 1 EN 423, Resilient floor coverings Determination of

37、resistance to staining 2 EN 1081, Resilient floor coverings Determination of the electrical resistance 3 EN 1399, Resilient floor coverings Determination of resistance to stubbed and burning cigarettes 4 EN 1815, Resilient and textile floor coverings Assessment of static electrical propensity 5 EN I

38、SO 10140-3, Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation (ISO 10140-3:2010) 6 EN ISO 717-2, Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation (ISO 717-2:1996) This pag

39、e deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Stan

40、dards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.I

41、t is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside f

42、rontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and ha

43、rd copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for interna

44、tional standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44

45、 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receiv

46、e substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at infor

47、mation about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced

48、, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the C