BS EN 795-2012 Personal fall protection equipment Anchor devices《防止从高处跌落设备 锚固装置》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 795:2012Personal fall protectionequipment Anchor devicesBS EN 795:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 795:2012. Itsup

2、ersedes BS EN 795:1997 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PH/5, Personal Fall Protection.A list of organizations represented on this committee can beobtained on request to its secretary.T h e i n t r o d u c t i o n t o B S E N 7 9 5 : 2 0

3、1 2 s t a t e s , R e q u i r e m e n t s a n d t e s t m e t h o d s f o r m u l t i - u s e r a n c h o r d e v i c e s , i . e . a n c h o r d e v i c e s t h a t a l l o w m o r e t h a n o n e u s e r t o b e a t t a c h e d a t a n y o n e t i m e , a r e p r o v i d e d i n a s e p a r a t e

4、C E N T e c h n i c a l S p e c i f i c a t i o n . T h i s T e c h n i c a l S p e c i f i c a t i o n i s C E N / T S 1 6 4 1 5 : 2 0 1 2 .This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards

5、 Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 65235 6ICS 13.340.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2012.Amendmen

6、ts issued since publicationDate T e x t a f f e c t e dBS EN 795:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 795 July 2012 ICS 13.340.60 Supersedes EN 795:1996English Version Personal fall protection equipment - Anchor devices quipement de protection individuelle contre les chutes - Dis

7、positifs dancrage Persnliche Absturzschutzausrstung - Anschlageinrichtungen This European Standard was approved by CEN on 9 June 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national s

8、tandard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version i

9、n any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

10、Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EURO

11、PEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 795:2012: EBS EN 795:2012EN

12、795:2012 (E) 2 Contents Page Foreword . 5Introduction 61 Scope . 72 Normative references . 73 Terms and definitions . 74 Requirements 144.1 General . 144.2 Materials. 144.2.1 Metal parts . 144.2.2 Rope and webbing 144.2.3 Connectors 154.3 Design and ergonomics . 154.4 Specific requirements 154.4.1 T

13、ype A anchor devices . 154.4.2 Type B anchor devices . 154.4.3 Type C anchor devices . 154.4.4 Type D anchor devices . 164.4.5 Type E anchor devices . 164.5 Marking and information 175 Test methods . 175.1 General . 175.2 Test arrangement and apparatus 185.2.1 Test lanyard and determination of free

14、fall distance 185.2.2 Dynamic strength and integrity test apparatus for types A, B, C and D anchor devices . 195.2.3 Static strength test apparatus . 195.2.4 Dynamic performance test apparatus for type E anchor devices . 195.3 Type A anchor devices . 205.3.1 General . 205.3.2 Deformation . 205.3.3 D

15、ynamic strength and integrity . 205.3.4 Static strength . 215.4 Type B anchor devices . 215.4.1 General . 215.4.2 Deformation . 215.4.3 Dynamic strength and integrity . 215.4.4 Static strength . 245.5 Type C anchor devices . 265.5.1 General . 265.5.2 Deformation . 275.5.3 Dynamic strength and integr

16、ity . 275.5.4 Static strength . 315.6 Type D anchor devices . 315.6.1 General . 315.6.2 Deformation . 315.6.3 Dynamic strength and integrity . 315.6.4 Static strength . 335.7 Type E anchor devices . 335.7.1 Deformation . 335.7.2 Dynamic performance 335.7.3 Post arrest suspension 34BS EN 795:2012EN 7

17、95:2012 (E) 3 5.7.4 Static strength . 345.8 Corrosion resistance . 346 Marking . 357 Information supplied by the manufacturer . 35Annex A (informative) Information on installation documentation and periodic examination . 37A.1 Information on installation to be supplied by the manufacturer 37A.2 Guid

18、ance on documentation to be supplied after an installation 37A.3 Guidance on periodic examination procedure . 40Annex B (informative) Significant technical changes between this European Standard and the previous edition EN 795:1996 and EN 795:1996/A1:2001 41Annex ZA (informative) Relationship betwee

19、n this European Standard and the Essential Requirements of EU Directive 89/686/EEC 43Bibliography 44Figures Figure 1 Examples of anchor systems that include an anchor device . 8Figure 2 Examples of anchor systems that are not covered by this European Standard 9 Figure 3 Example of a type A anchor de

20、vice with a structural anchor . 11 Figure 4 Example of a type A anchor device with a fixing element 11 Figure 5 Examples of type B anchor devices . 12Figure 6 Example of a type C anchor device 13Figure 7 Example of a type D anchor device 13Figure 8 Example of a type E anchor device 13Figure 9 Bowlin

21、e knot . 18Figure 10 Test lanyard for dynamic strength and integrity tests and dynamic performance tests . 19Figure 11 Example of a dynamic performance test apparatus for type E anchor devices . 20Figure 12 Dynamic test for type B anchor devices with legs (e.g. a tripod) and an anchor point(s) not o

22、n a leg23Figure 13 Dynamic test for type B anchor devices with legs (e.g. a tripod) and an anchor point on a leg 24Figure 14 Static strength test for type B anchor device with legs (e.g. a tripod) and a central anchor point . 25Figure 15 Static strength test for type B anchor device with legs (e.g.

23、a tripod) and an anchor point on a leg26Figure 16 Example of a single-span type C anchor device test arrangement 28Figure 17 Example of a multi-span type C anchor device test arrangement without a corner . 30Figure 18 Example of a multi-span type C anchor device test arrangement with a corner 30Figu

24、re 19 Example of a type D anchor device test arrangement including a cantilever. 32BS EN 795:2012EN 795:2012 (E) 4 Figure 20 Example of a type D anchor device test arrangement including a rigid anchor line joint or junction and a corner anchor . 33Figure A.1 Example of an installation plan . 39Figur

25、e A.2 Example of periodic examination procedure 40Tables Table B.1 Significant technical changes 41Table ZA.1 Correspondence between this European Standard and Directive 89/686/EEC 43BS EN 795:2012EN 795:2012 (E) 5 Foreword This document (EN 795:2012) has been prepared by Technical Committee CEN/TC

26、160 “Protection against falls from height including working belts”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2013, and conflicting national

27、standards shall be withdrawn at the latest by January 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes E

28、N 795:1996. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/686/EEC. For relationship with EU Directive 89/686/EEC, see informative Annex ZA, which is an integral p

29、art of this document. For details of the significant changes made since EN 795:1996 please refer to Annex B. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, C

30、roatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey an

31、d the United Kingdom. BS EN 795:2012EN 795:2012 (E) 6 Introduction A reliable anchor device is an essential component of any personal fall protection system. This European Standard is intended to act as a complementary standard for existing European Standards covering other components used in person

32、al fall protection systems. The scope and the requirements are based on the philosophy that anchor devices are rated to sustain the maximum dynamic force generated in a fall from a height by the mass of one person, including any equipment carried. The static strength tests are based on a minimum fac

33、tor of safety of two. To allow for foreseeable misuse of equipment, this European Standard provides requirements and test methods for anchor devices used in personal fall protection systems in accordance with EN 363, even if their intended use is for restraint. Requirements and test methods for mult

34、i-user anchor devices, i.e. anchor devices that allow more than one user to be attached at any one time, are not addressed in this document but advice is provided in a separate CEN Technical Specification. This European Standard is intended for the type testing of new products before placing them on

35、 the market and gives only minimum performance requirements. It is essential that anchor devices are designed and manufactured so that, in the foreseeable conditions of use for which they are intended, the user is able to perform the risk-related activity while being appropriately protected at the h

36、ighest possible level. Manufacturers may wish to bear these points in mind when deciding on the actual performance of their products. BS EN 795:2012EN 795:2012 (E) 7 1 Scope This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which

37、 are intended to be removable from the structure. These anchor devices incorporate stationary or travelling (mobile) anchor points designed for the attachment of components of a personal fall protection system in accordance with EN 363. This European Standard also gives requirements for marking and

38、instructions for use, and guidance on installation. This European Standard is not applicable to: anchor devices intended to allow more than one user to be attached at any one time; anchor devices used in any sports or recreational activity; equipment designed to conform to EN 516 or EN 517; elements

39、 or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders; structural anchors (see 3.3). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applic

40、ation. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 360, Personal protective equipment against falls from a height Retractable type fall arresters EN 362, Personal protective equipme

41、nt against falls from a height Connectors EN 363, Personal fall protection equipment Personal fall protection systems EN 364:1992, Personal protective equipment against falls from a height Test methods EN 365, Personal protective equipment against falls from a height General requirements for instruc

42、tions for use, maintenance, periodic examination, repair, marking and packaging EN 892, Mountaineering equipment Dynamic mountaineering ropes Safety requirements and test methods EN ISO 9227, Corrosion tests in artificial atmospheres Salt spray tests (ISO 9227) ISO 2232, Round drawn wire for general

43、 purpose non-alloy steel wire ropes and for large diameter steel wire ropes Specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 anchor system system intended for use as part of a personal fall protection system that incorporates an

44、 anchor point or points and/or an anchor device and/or an element and/or a fixing element and/or a structural anchor (see Figure 1) BS EN 795:2012EN 795:2012 (E) 8 Note 1 to entry: Anchor systems that are not intended to be removed from the structure are not covered by this European Standard. See Fi

45、gure 2. Figure 1a Figure 1c Figure 1b Figure 1d Key 1 anchor point 4 anchor device 2 structure (not part of the anchor device) 5 structural anchor (not part of the anchor device) 3 fixing element 6 7 element permanent fixation (e.g. resin bonding) Figure 1e Figure 1 Examples of anchor systems that i

46、nclude an anchor device BS EN 795:2012EN 795:2012 (E) 9 Figure 2a Figure 2b Figure 2c Figure 2d Key 1 anchor point 2 structure 3 permanent fixation (e.g. studded, screwed, riveted, welded, resin bonded) 4 structural anchor 5 concrete, insulation or other covering Figure 2 Examples of anchor systems

47、that are not covered by this European Standard 3.2 anchor device assembly of elements which incorporates one or more anchor points or mobile anchor points that can include a fixing element, is intended for use as part of a personal fall protection system, is intended to be removable from the structu

48、re and to be part of the anchor system 3.2.1 type A anchor device anchor device with one or more stationary anchor points, while in use, and with the need for a structural anchor(s) or fixing element(s) to fix to the structure (see Figures 3 and 4) Note 1 to entry: Anchor points may rotate or swivel

49、 when in use, where they are designed to do so. 3.2.2 type B anchor device anchor device with one or more stationary anchor points without the need for a structural anchor(s) or fixing element(s) to fix it to the structure (see Figure 5) 3.2.3 type C anchor device anchor device employing a flexible anchor line which deviates from th