BS EN 806-1-2000 Specifications for installations inside buildings conveying water for human consumption - General《建筑物内部饮用水供应设备规范 总则》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 806-1:2000 Incorpor

2、ating Amendment No. 1 The European Standard EN 806-1:2000, with incorporation of amendment A1:2001, has the status of a British Standard ICS 91.140.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Specification for installations inside buildings conveying water for human con

3、sumption Part 1: GeneralThis British Standard, having been prepared under the direction of the Sector Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 November 2000 BSI 17 January 2002 ISBN 0 580 36706 1 BS EN 806-

4、1:2000 Amendments issued since publication Amd. No. Date Comments 13472 17 January 2002 Indicated by a sideline National foreword This British Standard is the official English language version of EN 806-1:2000, including amendment A1:2001. The UK participation in its preparation was entrusted by Tec

5、hnical Committee B/504, Water supply, to Subcommittee B/504/2, Internal systems and components, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests

6、 informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referr

7、ed to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a co

8、ntract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 32, an inside b

9、ack cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Sidelining in this document indicates the most recent changes by amendment.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 806-1 September 2000+ A1August 2001 ICS 91.140.

10、60 English version Specifications for installations inside buildings conveying water for human consumption - Part 1: General (includes amendment A1:2001) Spcifications techniques relatives aux installations pour leau destine la consommation humaine lintrieur des btiments - Partie 1: Gnralits (inclut

11、 lamendement A1:2001) Technische Regeln fr Trinkwasser-Installationen - Teil 1: Allgemeines (enhlt nderung A1:2001) This European Standard was approved by CEN on 20 January 2000. Amendment A1:2001 was approved by CEN on 29 June 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regu

12、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This E

13、uropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the n

14、ational standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHE

15、S KOMITEE FR NORMUNG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 806-1:2000 + A1:2001 EPage 2 EN 806-1:2000 Contents Page Foreword. 3 1 Scope 4 2 Normative reference

16、s . 4 3 Objectives 5 4 Competence and duties for design, construction and operation 5 5 Terms and definitions. 5 6 Graphic symbols and abbreviations . 8 Annex A (informative) Examples for the use of graphic symbols . 31Page 3 EN 806-1:2000 Foreword This European Standard has been prepared by Technic

17、al Committee CEN/TC 164, “Water supply“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2001, and conflicting national standards shall be withdraw

18、n at the latest by March 2001. Annex A of this European Standard is informative. NOTE This is the first part of the European Standard EN 806 consisting of 5 parts as follows : EN 806-1, General EN 806-2, Design EN 806-3, Pipe sizing EN 806-4, Installation EN 806-5, Operation and maintenance Accordin

19、g to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, S

20、pain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This amendment EN 806-1:2000/A1:2001 to the EN 806-1:2000 has been prepared by Technical Committee CEN/TC 164 Water supply, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a nati

21、onal standard, either by publication of an identical text or by endorsement, at the latest by February 2002, and conflicting national standards shall be withdrawn at the latest by December 2004. According to the CEN/CENLEC Internal Regulations, the national standards organizations of the following c

22、ountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Page 4 EN 806-1:2000 1 Scope This European Standa

23、rd specifies requirements for and gives recommendations on the design, installation, alteration, testing, maintenance and operation of potable water installations within buildings and, for certain purposes, pipework outside buildings but within the premises (see Figure 1). It covers the system of pi

24、pes, fittings and connected appliances installed for supplying potable water. If there is a private drinking water supply within the property boundary, the scope of this standard also covers the pipe system from the point of entry from that private water supply. The sphere of application ends at the

25、 downstream end of the potable water installation at which point must be an air gap, (e. g. at a kitchen tap) or a protection device, (e. g. at a hose union tap). 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These norma

26、tive references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated refer

27、ences the latest edition of the publication referred to applies. EN 805:1999, Water supply Requirements for systems and components outside buildings. EN 1717:1999, Protection against pollution of potable water in drinking water installations and general requirements of devices to prevent pollution b

28、y backflow. EN 60617-2, Graphical symbols for diagrams Part 2: Symbol elements, qualifying symbols and other symbols having general application. EN 60617-4, Graphical symbols for diagrams Part 4: Basic passive components. EN 60617-6, Graphical symbols for diagrams Part 6: Production and conversion o

29、f electrical energy. prEN 806-2:1996, Specifications for installations inside buildings conveying water for human consumption Part 2: Design. prEN 806-3:1997, Specifications for installations inside buildings conveying water for human consumption Part 3: Pipe sizing. ISO 4063, Welding, and allied pr

30、ocesses Nomenclature of processes and reference numbers. ISO 6412-1, Technical drawings Simplified representation of pipelines Part 1: General rules and orthogonal representation. ISO 14617-3, Graphical symbols for diagrams Part 3: Connections and related devices. ISO 14617-4, Graphical symbols for

31、diagrams Part 4: Actuators and related devices. ISO 14617-5, Graphical symbols for diagrams Part 5: Measurement and control devices. ISO 14617-21, Graphical symbols for diagrams Part 21: Basic mechanical components. ISO 14617-22, Graphical symbols for diagrams Part 22: Valves and dampers.Page 5 EN 8

32、06-1:2000 3 Objectives The main objectives are to ensure that: the deterioration in water quality within the installation is avoided; the required flow of water and pressure is available at the draw-off points and at the connection points of appliances (e. g. water heaters, washing machines); the po

33、table water meets the standards for physical, chemical and microbiological quality at the draw-off points; all parts of the installation do not cause danger to health and do not damage property within calculated lifetimes; the maintenance of the installation meets the functional requirements at all

34、times during its lifetime; sound levels are kept to a practicable minimum; contamination of the public water supply, undue consumption, leakage and misuse is avoided. 4 Competence and duties for design, construction and operation 4.1 Designer The design shall be carried out by competent persons, e.

35、g. persons with relevant experience, qualifications 1), knowledge of regulations and safety requirements. 4.2 Installer The work for construction, alteration and maintenance shall be carried out by competent installers in accordance with qualification required by national or local regulations. 4.3 W

36、ater supplier The data necessary for design and construction (e. g. supply pressure, the supply flow rates and the water quality analysis at the point of delivery) shall be determined before commencement of work: the information should be made available by the water supplier (or the operator of a pr

37、ivate or separate water supply). 4.4 Operator The owner/occupier is responsible for ensuring the safe operation and maintenance of the potable water installation and should be provided with the necessary information. 5 Terms and definitions For the purposes of this European Standard, the following t

38、erms and definitions apply. 5.1 potable water for the purpose of this specification, potable water shall be suitable for human consumption and conform with the relevant regulations based on ECC directives The water may also be used for washing, cooking and sanitary purposes (at temperatures up to 95

39、 C to allow for malfunctions).1) European regulations to be prepared.Page 6 EN 806-1:2000 5.2 non-potable water the collective definition for all kinds of water other than potable water 5.3 potable water installations for the principal representation see annex A 5.3.1 service pipe the water pipe whi

40、ch supplies water from the local main to the potable water installation 5.3.2 supply pipe the water pipe which conducts water from the supply stop valve to connection draw off points and connection points of appliances 5.3.3 water meter assembly the water meter assembly comprises the water meter and

41、 associated fittings 5.3.4 distributing pipe distributing pipe means any pipe (other than an overflow pipe or a flush pipe) conveying water from a storage cistern, or from a hot water appliance supplied from a feed cistern, and under pressure from that cistern 5.3.5 header pipe the horizontal pipe b

42、etween the supply stop valve and the rising pipe 5.3.6 rising (falling) pipe the part of the pipe (supply or distributing pipe) which leads from floor to floor and from which the floor service pipes or dead-legs branch off 5.3.7 floor service pipe the pipe which branches off from the rising (falling

43、) pipe within a floor and from which dead-legs branch 5.3.8 dead-leg the pipe which is leading to a draw-off point 5.3.9 return pipe a pipe in a hot potable water circuit in which water returns to the boiler or to the hot water storage vessel 5.3.10 firefighting pipe firefighting supply pipes with e

44、xtinguishing devices (e. g. hydrants, sprinklers and water curtains) 5.4 valves 5.4.1 ferrule a device for connecting a service pipe to the local main. The device may contain a service stop valve 5.4.2 service stop valve the water suppliers stop valve, which is the first valve in the service pipe af

45、ter or included in the ferrulePage 7 EN 806-1:2000 5.4.3 supply stop valve the first stop valve in the premises which controls the downstream supply and may be included in a water meter assembly 5.4.4 servicing valve that valve intended to facilitate maintenance or servicing of a water fitting or ap

46、pliance 5.4.5 flow reducing valve a device for reducing the flow by narrowing the cross-section 5.4.6 draw-off point those points in the potable water installation from which water can be drawn 5.4.7 tap a valve with an air gap from which water is drawn 5.4.8 drain tap a tap fitted to drain the cont

47、ents of the potable water installation or of parts of it 5.4.9 protection unit a unit to protect the quality of potable water (see EN 1717:1999) 5.4.10 safety device a device which operates when dangerous physical operating conditions occur, e. g. excess pressure or temperature 5.4.11 adjustable con

48、trol valve a valve for regulating flow, pressure or temperature 5.5 measuring device a device for measuring parameters e. g. pressure, temperature or volume 5.6 appliance, equipment a device in which the potable water is used and/or is modified e. g. water heater, chemical dosing unit, coffee-machin

49、e, WC 5.7 prefabricated unit a unit comprising assemblies of pipes, fittings, valves, equipment etc., which is assembled off-site and is transported in complete units to the place of installation 5.8 hydraulic definitions 5.8.1 flow rate The quotient of the volume of water which is flowing and the time 5.8.2 velocity the quotient of flow rate and internal cross-sectionPage 8 EN 806-1:2000 5.8.3 direction of flow the direction of flow during normal operation 5.8.4 service pressure (SP) the internal pressure at the po