BS EN 986-2005 Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane《铺地织物 铺地织物块 .pdf

1、BRITISH STANDARDBS EN 986:2005Textile floor coverings Tiles Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of planeThe European Standard EN 986:2005 has the status of a British StandardICS 59.080.60g49g50g3g38g50g51g60g44g49g42g3g58g44g

2、55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Wed Apr 12 08:47:26 BST 2006, Uncontrolled Copy, (c) BSIBS EN 986:2005This British Standard was published und

3、er the authority of the Standards Policy and Strategy Committee on 16 January 2006 BSI 16 January 2006ISBN 0 580 47669 3National forewordThis British Standard is the official English language version of EN 986:2005. It supersedes BS EN 986:1995 which is withdrawn.The UK participation in its preparat

4、ion was entrusted to Technical Committee PRI/1, Textile floor coverings, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications ref

5、erred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provi

6、sions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation,

7、 or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover.The BSI copyright notice disp

8、layed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Wed Apr 12 08:47:26 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 986December 2005ICS 59.080.60 Supersedes

9、EN 986:1995 English VersionTextile floor coverings - Tiles - Determination of dimensionalchanges due to the effects of varied water and heat conditionsand distortion out of planeRevtements de sol textiles - Dalles - Dtermination de lavariation des dimensions et de lincurvation due aux effetsde diver

10、ses conditions de mouillage et de chaleurTextile Bodenbelge - Fliesen - Bestimmung derManderung infolge der Wirkungen wechselnder Feuchte-und Temperaturbedingungen und vertikaleFlchenverformungThis European Standard was approved by CEN on 26 October 2005.CEN members are bound to comply with the CEN/

11、CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any

12、 CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN me

13、mbers are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and Uni

14、ted Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 986:2005: ELice

15、nsed Copy: Wang Bin, na, Wed Apr 12 08:47:26 BST 2006, Uncontrolled Copy, (c) BSIEN 986:2005 (E) 2 Contents Page Foreword. 3 1 Scope 4 2 Normative references . 4 3 Principle . 4 3.1 Dimensional stability 4 3.2 Distortion out of plane 4 4 Apparatus 4 4.1 Dimensional stability 4 4.2 Distortion out of

16、plane 4 5 Sampling and preparation of specimens 5 5.1 Tiles of dimensions 500 mm . 5 5.2 Tiles of dimensions 500 mm. 5 6 Conditioning 5 7 Test procedure 5 7.1 Initial measurements 5 7.2 Test procedure 5 8 Expression of results 6 8.1 Dimensional stability 6 8.2 Distortion out of plane 6 9 Test report

17、 . 6 Licensed Copy: Wang Bin, na, Wed Apr 12 08:47:26 BST 2006, Uncontrolled Copy, (c) BSIEN 986:2005 (E) 3 Foreword This European Standard (EN 986:2005) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI. Th

18、is European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by June 2006. This European Standard supersedes EN 986:1995. According

19、to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

20、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Wed Apr 12 08:47:26 BST 2006, Uncontrolled Copy, (c) BSIEN 986:2005 (E) 4 1 Scope This European Standard specifies a method for the determination o

21、f dimensional changes and distortion out of plane likely to take place when textile floor coverings in tile form are exposed to various conditions of moisture and heat. This European Standard is applicable to all textile floor coverings in tile form. 2 Normative references The following referenced d

22、ocuments are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 139, Textiles Standard atmospheres for conditioning and tes

23、ting (ISO 139:2005) 3 Principle 3.1 Dimensional stability Determination of changes in the flat dimensions of a specimen after treatment with various specified conditions of moisture and heat. 3.2 Distortion out of plane Measurement of the vertical deformation shown by the specimen after treatment wi

24、th various specified conditions of moisture and heat. 4 Apparatus 4.1 Dimensional stability 4.1.1 Instrument capable of measuring a dimension to an accuracy of 0,05 mm, such as a slide gauge or measuring table or an opto-electronic system. 4.1.2 Loading plate of metal or glass of dimensions slightly

25、 smaller than the test specimen, or any other device capable of keeping the specimen flat during measurement of dimensional change. 4.2 Distortion out of plane 4.2.1 Instrument capable of measuring in the vertical dimension to an accuracy of 0,5 mm. 4.2.2 Support plate of dimensions slightly larger

26、than the test specimen on which to place the specimen during measurement. 4.3 Drying oven with forced ventilation able to maintain a temperature of 60 C 2 C containing removable shelves of smooth inert material with perforations to permit free circulation of air. 4.4 Container to hold water at 20 C

27、2 C, of dimensions at least 20 mm greater than the test specimen and deep enough to permit the specimen to be submerged. Licensed Copy: Wang Bin, na, Wed Apr 12 08:47:26 BST 2006, Uncontrolled Copy, (c) BSIEN 986:2005 (E) 5 5 Sampling and preparation of specimens 5.1 Tiles of dimensions 500 mm Take

28、at least three tiles as delivered by the manufacturer, marking to show the direction of manufacture. 5.2 Tiles of dimensions 500 mm From these tiles take at least three specimens and reduce the size to dimensions not greater than 500 mm x 500 mm. 6 Conditioning Condition the test specimens in the st

29、andard atmosphere for testing textiles as defined in EN ISO 139 for at least 48 h or until constant mass. 7 Test procedure 7.1 Initial measurements 7.1.1 Distortion out of plane Make all measurements on the conditioned specimen. Place each specimen with the use surface uppermost on the flat support

30、(4.2.2). 7.1.2 Dimensional stability For the determination of the dimensional stability, it is important to measure the backing, the measuring system will determine whether the tiles should be positioned face upwards or downwards. Keeping the conditioned specimen flat with the loading plate (4.1.2),

31、 measure the distance between the sides parallel to the direction of manufacture then between the sides perpendicular to the direction of manufacture in at least two different places. Measure to the nearest 0,05 mm with the apparatus in 4.1.1. 7.2 Test procedure The same test specimen should be trea

32、ted consecutively by all of the following procedures. 7.2.1 Place the test specimen in the oven at 60 C 2 C so that air can circulate freely around the specimen. After 2 h remove the specimen and perform the measurements in 7.1.2 at an interval of (5 1) min from the time of removal from the oven. 7.

33、2.2 Immerse the test specimen flat in the water at 20 C 2 C. After 2 h remove the specimen taking care not to distort it (e.g. as a result of its weight). The excess of water is removed by use of blotting paper, care has to be taken so as not to distort the sample. Perform the measurements in 7.1.2

34、at an interval of (5 1) min from the time of removal from the water. 7.2.3 Place each test specimen in the oven with the use surface uppermost at 60 C 2 C for 24 h then perform the measurements described in 7.1.2 at an interval of (5 1) min from the time of removal from the oven. Licensed Copy: Wang

35、 Bin, na, Wed Apr 12 08:47:26 BST 2006, Uncontrolled Copy, (c) BSIEN 986:2005 (E) 6 7.2.4 Re-condition the specimen in the standard atmosphere for testing textiles for 48 h or until constant mass. 7.2.5 After conditioning measure the distortion out of plane as follows: place each specimen with the u

36、se surface uppermost on the flat support (4.2.2). Measure the vertical distance between the support plate and the back of the tile, measure this distance in each direction and in the position where it is greatest with the apparatus in 4.2.1, or at various places along each edge (edge curl). 7.2.6 Th

37、en measure the dimensions of the specimen as indicated in 7.1.2. 8 Expression of results 8.1 Dimensional stability Calculate the dimensional change averaging (over the three specimens) for each direction and each stage of the procedure and express as a percentage by the following equation to the nea

38、rest 0,1 %: let lo, be the arithmetic mean of the initial measures; and lmithe arithmetic mean at each stage. Calculate the dimensional change and express as a percentage of the mean by the following equation percentage: (lm - lo) x 100 loIndicate the result with a - if it is a shrinkage and a + if

39、it is an increase. Whenever possible the results may be expressed in the form of a graph. 8.2 Distortion out of plane For each specimen and for each direction express the distortion out of plane by the distance measured in 7.2.5. 9 Test report The test report shall include the following information:

40、 a) reference to this European Standard, i.e. EN 986; b) complete identification of the product tested including type, source and the manufacture reference numbers; c) previous history of the sample; d) values calculated in Clause 8; e) description of the final appearance of the test specimen includ

41、ing indications of the degree of buckling, saucering, doming, curling and other changes; Licensed Copy: Wang Bin, na, Wed Apr 12 08:47:26 BST 2006, Uncontrolled Copy, (c) BSIEN 986:2005 (E) 7 f) details of the measuring instrument used; g) any deviation from this European Standard which may have aff

42、ected the results. Licensed Copy: Wang Bin, na, Wed Apr 12 08:47:26 BST 2006, Uncontrolled Copy, (c) BSIBS EN 986:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on sta

43、ndards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality o

44、f our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8

45、996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8

46、996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise req

47、uested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and service

48、s. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Memb

49、ership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except