BS EN 10058-2003 Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions《一般用途热轧扁钢棒 尺寸及形状和尺寸公差》.pdf

1、BRITISH STANDARD BS EN 10058:2003 Hot rolled flat steel bars for general purposes Dimensions and tolerances on shape and dimensions The European Standard EN 10058:2003 has the status of a British Standard ICS 77.140.60 BS EN 10058:2003 This British Standard, was published under the authority of the

2、Standards Policy and Strategy Committee on 1 December 2003 BSI 1 December 2003 ISBN 0 580 43003 0 National foreword This British Standard is the official English language version of EN 10058:2003. The UK participation in its preparation was entrusted to Technical Committee ISE/31, Wrought steels, wh

3、ich has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the sec

4、tion entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

5、Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor re

6、lated international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 10, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the

7、document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN10058 October2003 ICS77.140.60 Englishversion HotrolledflatsteelbarsforgeneralpurposesDimensionsand tolerancesonshapeanddimensions Platsenacierlaminschaudpourusagesgnr

8、aux Dimensionsettolrancessurlaformeetlesdimensions WarmgewalzteFlachstbeausStahlfrallgemeine VerwendungMae,FormtoleranzenundGrenzabmae ThisEuropeanStandardwasapprovedbyCENon12September2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope

9、an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagema

10、debytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,N

11、etherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnati

12、onalMembers. Ref.No.EN10058:2003EEN10058:2003(E) 2 Contents page Foreword .3 1 Scope 4 2 Normativereferences 4 3 Termsanddefinitions . 4 4 Designation 4 5 Dimensions 4 6 Tolerancesondimensionsandshape 6 6.1 Thickness( t).6 6.2 Width( b) .6 6.3 Length( L) .6 6.4 Straightness( q) .6 6.5 Outofsection(

13、u).6 7 Measurement8 7.1 Thicknessandwidth . 8 7.2 Length.8 7.3 Straightness .8 7.4 Outofsection 8 Bibliography10EN10058:2003(E) 3 Foreword Thisdocument(EN10058:2003)hasbeenpreparedbyTechnicalCommitteeECISS/TC11“Structuralsteelsectionsand hotrolledsteelbarsforengineeringuseDimensionsandtolerances”,th

14、esecretariatofwhichisheldbyBSI. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextorby endorsement,atthelatestbyApril2004,andconflictingnationalstandardsshallbewithdrawnatthelatestbyApril2004. ThisEuropeanStandardreplaces: EURONORM5878 Hotrolledflatsfor

15、generalpurposes . AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowingcountriesare boundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland,France,Germany, Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portu

16、gal,Slovakia,Spain,Sweden, SwitzerlandandtheUnitedKingdom.EN10058:2003(E) 4 1Scope ThisEuropeanStandardspecifiesthenominaldimensionsandthetolerancesondimensionsandshapeofhotrolledsteel flatbarsforgeneralpurposes. Thisstandardisnotapplicabletospringleaves,seeEN100921. 2 Normativereferences ThisEurope

17、anStandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.Thesenormative referencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.Fordatedreferences, subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropeanStandardonlywhen incor

18、poratedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthepublicationreferredtoapplies (includingamendments). EN10079:1992, Definitionofsteelproducts . EN100881, StainlesssteelsPart1:Listofstainlesssteels . 3 Termsanddefinitions ForthepurposesofthisEuropeanStandardthetermsanddefiniti

19、onsgiveninEN10079:1992apply. 4Designation Thedesignationofhotrolledsteelflatbarsshallcomprise: theterm”flatbar”; thenumberofthisEuropeanStandard(EN10058); dimensionsinmm(widthxthicknessxlength(M,ForE,seeTable3); thenumberofthequalitystandardandthesteelnameorsteelnumberoftheorderedsteel. EXAMPLE Flat

20、barEN1005820x5x6000M steelEN10025S235JR 5Dimensions HotrolledflatbarsforgeneralpurposescomplyingwiththisEuropeanStandardshallbedeliveredwiththespecified dimensionsrangegiveninTable1andillustratedinFigure1.ThepreferreddimensionsarepresentedinTable1. NOTE Formanufacturingreasonsthecornersarenotsharp.E

21、N10058:2003(E) 5 Figure1Hotrolledsteelflatbar Table1Preferreddimensionsandmassofhotrolledflatsforgeneralpurposes Width Thickness, t(mm) b 5681 01 21 52 02 53 03 54 05 06 08 0 (mm) Mass(kg/m ab ) 10 0,393 12 0,471 0,565 15 0,589 0,707 0,942 1,18 16 0,628 0,754 1,00 1,26 20 0,785 0,942 1,26 1,57 1,88

22、2,36 25 0,981 1,18 1,57 1,96 2,36 2,94 30 1,18 1,41 1,88 2,36 2,83 3,53 4,71 35 1,37 1,65 2,20 2,75 3,30 4,12 5,50 40 1,57 1,88 2,51 3,14 3,77 4,71 6,28 7,85 9,42 45 1,77 2,12 2,83 3,53 4,24 5,30 7,07 8,83 10,60 50 1,96 2,36 3,14 3,93 4,71 5,89 7,85 9,81 11,8 60 2,36 2,83 3,77 4,71 5,65 7,07 9,42 11

23、,8 14,1 16,5 18,8 70 2,75 3,30 4,40 5,50 6,59 8,24 11,0 13,7 16,5 19,2 22,0 80 3,14 3,77 5,02 6,28 7,54 9,42 12,6 15,7 18,8 22,0 25,1 31,4 37,7 90 3,53 4,24 5,65 7,07 8,48 10,6 14,1 17,7 21,2 24,7 28,3 35,3 42,4 100 3,93 4,71 6,28 7,85 9,42 11,8 15,7 19,6 23,6 27,5 31,4 39,3 47,1 120 5,65 7,54 9,42

24、11,3 14,1 18,8 23,6 28,3 33,0 37,7 47,1 56,5 150 7,06 9,42 11,8 14,1 17,7 23,6 29,4 35,3 41,2 47,1 58,9 70,7 94,2 a Calculatedusingdensityof7,85kg/dm 3 b ThemassesofstainlesssteelbarsshallbemultipliedbythefactorsaccordingtoEN100881.EN10058:2003(E) 6 6 Tolerancesondimensionsandshape 6.1Thickness ( t)

25、 Thedeviationfromnominalthickness( t)shallbewithinthetolerancegiveninTable2. 6.2Width ( b) Thedeviationfromnominalwidth( b)shallbewithinthetolerancegiveninTable2. 6.3Length ( L) Dependingonthetypeoflength,flatbarsshallbecuttolengthswithintolerancesgiveninTable3. 6.4Straightness ( q) Thestraightnesss

26、hallcomplywiththerequirementsgiveninTable2.Therequirementsforwavinessmaybeagreedat thetimeofenquiryandorder. 6.5Outofsection ( u) Theoutofsection( u)shallbewithinthetolerancegiveninTable2.EN10058:2003(E) 7 Table2Tolerancesondimensionsandshapeofhotrolledflatbarsforgeneralpurposes Dimensionsinmm Width

27、 b Nominalwidth Limitdeviation a 10 b 40 0,75 40 b 80 1 80 b 100 1,5 100 b 120 2 SeeFigure1 120 b 150 2,5 Thickness t Nominalthickness Limitdeviation a t 20 0,5 20 t 40 1 SeeFigure1 40 t 80 1,5 Straightness q Nominalcrosssection Toleranceintheplaneof b 1000mm 2 1000mm 2 q 0,4%of L q 0,25%of L Outofs

28、ection u Nominalthickness Tolerance 10 t 25 0,5 25 t 40 1 SeeFigure2 40 t 80 1,5 a Whenordering,thetotalrangesforpermissibledeviationsmay,byagreement,beentirelyonthe plusside.EN10058:2003(E) 8 Table3Tolerancesonlengths Typeoflength a Range (mm) Limitdeviation b Manufacturinglength(M) 3000to13000with

29、arangeof 2000perorderitem. 10%ofbarssuppliedmaybe belowtheminimumforthe orderedrangebutnotlessthan 75%oftheminimumofthe range. Fixedlength(F) 3000to13000 100mm 6000 25mm 6000to 50mm Exactlength(E) 13000 a Thepurchasershallindicateintheenquiryandorderthetypeoflengthrequiredandthelength rangeorlengthr

30、equired. b Ifagreedduringtheenquiryandorder,productsmaybedeliveredonplustolerances. 7Measurement 7.1Thickness and width Thethicknessandwidthshallbemeasuredatanypointsituatedatleast100mmfromtheendofthebar.Shearingmay deformthebarends,Theconditionoftheendsmaybeagreedattimeofenquiryandorder. 7.2Length

31、Thelengthshallbemeasuredasthelongestlengthofthebar. 7.3Straightness Thestraightnessshallbemeasuredoverthetotallength Lofthebar. 7.4Outofsection TheoutofsectionshallbemeasuredaccordingtoFigure2asthedifference uonthenominalwidth b.EN10058:2003(E) 9 Figure2OutofsectionEN10058:2003(E) 10 Bibliography 1

32、EN100921, HotrolledspringsteelflatbarsPart1:FlatbarsDimensionsandtolerancesonshapeand dimensions.blankBS EN 10058:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view

33、on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the

34、quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +4

35、4 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:

36、 +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless

37、otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its produ

38、cts and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benef

39、its contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http

40、:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system

41、 or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.