1、BSI Standards PublicationBS EN 12007-5:2014Gas infrastructure Pipelinesfor maximum operatingpressure up to and including 16barPart 5: Service lines Specific functionalrequirementsBS EN 12007-5:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12007-5:2014.The
2、 UK committee generally supports the content of this EN standard and the safety principles it represents. The Introduction acknowledges that it is not a Design Handbook nor a Code of Practice and that additional national and company standards describing the details are needed. Under UK gas safety le
3、gislation, gas companies are required to comply fully with UK Gas Safety Regulations as part of their License to Operate. The companies are also obliged to complete a Safety Case document, which includes: technologies employed, standards, codes and competencies of personnel etc., and have it approve
4、d by the UK Health and Safety Executive as part of their operating licence, which is issued by the Office of Gas and Electricity Markets, OFGEM. Another essential requirement of the operating license is ensuring economic costs of gas transportation and distribution. Consequently, UK gas infrastructu
5、re operating companies might make certain departures from the specific detailed requirements mentioned in Part 5 in order to comply simultaneously with the safety and economic criteria.The UK participation in its preparation was entrusted to Technical Committee GSE/33, Gas supply.A list of organizat
6、ions represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014IS
7、BN 978 0 580 78071 4ICS 23.040.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2014.Amendments/corrigenda issued since publicationDate Text affectedBS
8、EN 12007-5:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12007-5 April 2014 ICS 23.040.01 English Version Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements Infrastructures gazires - Canalisat
9、ions pour pression maximale de service infrieure ou gale 16 bar - Partie 5: Branchements - Recommandations fonctionnelles spcifiques Gasinfrastruktur - Rohrleitungen mit einem maximal zulssigen Betriebsdruck bis einschlielich 16 bar - Teil 5: Hausanschlussleitungen - Spezifische funktionale Anforder
10、ungen This European Standard was approved by CEN on 8 February 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographic
11、al references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility
12、of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of M
13、acedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION
14、EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12007-5:2014 EBS EN 12007-5:2014EN 12007-5:2014 (E) 2 Contents Page Introduction .
15、5 1 Scope 6 2 Normative references 7 3 Terms and definitions .8 3.1 General terminology 8 3.2 Pressure related terminology 10 4 Design 10 4.1 General . 10 4.2 Protection 11 4.3 Materials and components 12 4.3.1 General . 12 4.3.2 Isolation valve . 12 4.3.3 Flow limiting device 13 4.3.4 Venting devic
16、es. 13 4.3.5 Regulators and meters . 13 4.4 Service line routing. 13 4.4.1 External routing 13 4.4.2 Wall and floor transition . 13 4.4.3 Internal routing 14 4.5 Pipe sizing . 15 4.6 Identification 15 5 Construction 15 5.1 General . 15 5.2 Storage, handling and transportation. 16 5.3 Service line in
17、stallation 16 5.4 Connections to existing gas infrastructure . 17 6 Quality control . 17 6.1 Quality management system . 17 6.2 Inspection prior to installation 17 6.3 Inspection during installation 17 6.3.1 Ground conditions 17 6.3.2 Joint integrity 18 6.4 Competence 18 7 Pressure testing 18 7.1 Ge
18、neral . 18 7.2 Safety during pressure testing 19 7.3 Prior to testing 19 7.4 Test mediums 19 7.5 Measurement equipment . 19 7.6 Strength test 19 7.7 Tightness test 20 7.8 Failed pressure test 20 8 Commissioning and decommissioning 21 8.1 General . 21 8.2 Purging 21 9 Operation and maintenance 21 9.1
19、 General . 21 BS EN 12007-5:2014EN 12007-5:2014 (E) 3 9.2 Record system and traceability . 22 Annex A (normative) Jointing methods . 23 A.1 General . 23 A.2 Threaded joints 23 A.3 Fusion, welded, brazed and soldered joints . 23 A.4 Mechanical joints . 23 A.5 Pressed joints 23 A.5.1 General . 23 A.5.
20、2 Pressed joints for copper pipe . 24 Bibliography 25 BS EN 12007-5:2014EN 12007-5:2014 (E) 2 Contents Page Introduction .5 1 Scope 6 2 Normative references 7 3 Terms and definitions .8 3.1 General terminology 8 3.2 Pressure related terminology 10 4 Design 10 4.1 General . 10 4.2 Protection 11 4.3 M
21、aterials and components 12 4.3.1 General . 12 4.3.2 Isolation valve . 12 4.3.3 Flow limiting device 13 4.3.4 Venting devices. 13 4.3.5 Regulators and meters . 13 4.4 Service line routing. 13 4.4.1 External routing 13 4.4.2 Wall and floor transition . 13 4.4.3 Internal routing 14 4.5 Pipe sizing . 15
22、 4.6 Identification 15 5 Construction 15 5.1 General . 15 5.2 Storage, handling and transportation. 16 5.3 Service line installation 16 5.4 Connections to existing gas infrastructure . 17 6 Quality control . 17 6.1 Quality management system . 17 6.2 Inspection prior to installation 17 6.3 Inspection
23、 during installation 17 6.3.1 Ground conditions 17 6.3.2 Joint integrity 18 6.4 Competence 18 7 Pressure testing 18 7.1 General . 18 7.2 Safety during pressure testing 19 7.3 Prior to testing 19 7.4 Test mediums 19 7.5 Measurement equipment . 19 7.6 Strength test 19 7.7 Tightness test 20 7.8 Failed
24、pressure test 20 8 Commissioning and decommissioning 21 8.1 General . 21 8.2 Purging 21 9 Operation and maintenance 21 9.1 General . 21 BS EN 12007-5:2014EN 12007-5:2014 (E) 3 9.2 Record system and traceability . 22 Annex A (normative) Jointing methods . 23 A.1 General . 23 A.2 Threaded joints 23 A.
25、3 Fusion, welded, brazed and soldered joints . 23 A.4 Mechanical joints . 23 A.5 Pressed joints 23 A.5.1 General . 23 A.5.2 Pressed joints for copper pipe . 24 Bibliography 25 BS EN 12007-5:2014EN 12007-5:2014 (E) 4 Foreword This document (EN 12007-5:2014) has been prepared by Technical Committee CE
26、N/TC 234 “Gas infrastructure”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014 and conflicting national standards shall be withdrawn at the la
27、test by October 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by
28、the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This European Standard is part of the series EN 12007 “Gas infrastructure Pipelines for maximum operating pressure up to and including 16 bar“ which comprises the following parts:
29、 Part 1 General functional requirements; Part 2 Specific functional requirements for polyethylene (MOP up to and including 10 bar); Part 3 Specific functional requirements for steel; Part 4 Specific functional requirements for renovation; Part 5 Specific functional recommendations of new service lin
30、es. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
31、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12007-5:2014EN 12007-5:2014 (E) 5 Introduction This European Standard describ
32、es the general functional requirements for gas supply through service line pipe systems and covers the pressure range up to and including 16 bar maximum operating pressure (MOP). It gives normative and informative references for safe and secure gas infrastructures. It applies to their design, constr
33、uction, operation and the related aspects of safety, environment and public health, all in order to provide a safe and secure supply of gas. This European Standard is intended to be used in addition to the EN 12007 series of European Standards. The requirements of this European Standard are based on
34、 safe gas engineering practice under conditions normally encountered in the gas industry. Requirements for all unusual conditions cannot be specifically provided for, nor are all engineering and construction details prescribed. Existing industrial safety regulations applying to work areas, safety de
35、vices and safe work practices are not intended to be supplanted by this European Standard. Persons responsible for the design, construction and operation of gas infrastructures should have regard to the guidance given in this European Standard, the EN 12007 series of European Standards and to other
36、relevant standards. It is the responsibility of these persons to apply these functional requirements, supplemented with other proven good practice to the particular circumstances of each gas infrastructure. The recommendations in this European Standard are intended to be applied by competent persons
37、 who have suitable knowledge and experience. Notes in the text are informative. The designer, constructor or operator of service line and pipeline systems is cautioned that this European Standard is not a design handbook or code of practice. Additional national or company standards describing the de
38、tails are needed. These detailed standards should be in line with the basic principles of this European Standard. All pressures are gauge pressure unless stated otherwise. In preparing this European Standard it was recognised that the suite of relevant European Standards is incomplete. Reference may
39、 be made where appropriate to international, national or other standards until relevant European Standards are available. BS EN 12007-5:2014EN 12007-5:2014 (E) 4 Foreword This document (EN 12007-5:2014) has been prepared by Technical Committee CEN/TC 234 “Gas infrastructure”, the secretariat of whic
40、h is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014 and conflicting national standards shall be withdrawn at the latest by October 2014. Attention is drawn to the possib
41、ility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade As
42、sociation, and supports essential requirements of EU Directive(s). This European Standard is part of the series EN 12007 “Gas infrastructure Pipelines for maximum operating pressure up to and including 16 bar“ which comprises the following parts: Part 1 General functional requirements; Part 2 Specif
43、ic functional requirements for polyethylene (MOP up to and including 10 bar); Part 3 Specific functional requirements for steel; Part 4 Specific functional requirements for renovation; Part 5 Specific functional recommendations of new service lines. According to the CEN-CENELEC Internal Regulations,
44、 the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La
45、tvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12007-5:2014EN 12007-5:2014 (E) 5 Introduction This European Standard describes the general functional requirements for gas supply
46、through service line pipe systems and covers the pressure range up to and including 16 bar maximum operating pressure (MOP). It gives normative and informative references for safe and secure gas infrastructures. It applies to their design, construction, operation and the related aspects of safety, e
47、nvironment and public health, all in order to provide a safe and secure supply of gas. This European Standard is intended to be used in addition to the EN 12007 series of European Standards. The requirements of this European Standard are based on safe gas engineering practice under conditions normal
48、ly encountered in the gas industry. Requirements for all unusual conditions cannot be specifically provided for, nor are all engineering and construction details prescribed. Existing industrial safety regulations applying to work areas, safety devices and safe work practices are not intended to be s
49、upplanted by this European Standard. Persons responsible for the design, construction and operation of gas infrastructures should have regard to the guidance given in this European Standard, the EN 12007 series of European Standards and to other relevant standards. It is the responsibility of these persons to apply these functional requirements, supplemented with other proven good practice to the particular circumstances of each gas infrastructure. The recommendations in this European Standard are intended to be applied by competent persons who
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1