BS EN 12079-1-2006 Offshore containers and associated lifting sets - Offshore containers - Design manufacture and marking《海岸集装箱及其相关提升设备 第1部分 海岸集装箱 设计、制造和标识》.pdf

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Part 1: Offshore containers Design, manufacture and markingThe European Standard EN 12079-1:2006 ha

2、s the status of a British StandardICS 55.180.10Offshore containers and associated lifting sets BRITISH STANDARDBS EN 12079-1:2006BS EN 12079-1:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006ISBN 0 580 48823 3request

3、to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electro

4、nic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis d

5、ocument comprises a front cover, an inside front cover, the EN title page, pages 2 to 34, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsA list of organizat

6、ions represented on this committee can be obtained on present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Nation

7、al forewordThis British Standard is the official English language version of EN 12079-1:2006. Together with BS EN 12079-3:2006 it supersedes BS EN 12079:1999 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TW/1, Freight containers and swap bodies, whic

8、h has the responsibility to: aid enquirers to understand the text;EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 12079-1April 2006ICS 55.180.10 Supersedes EN 12079:1999 English VersionOffshore containers and associated lifting sets - Part 1: Offshorecontainer - Design, manufacture and markingCont

9、eneurs pour utilisation en mer et dispositifs de levageassocis - Partie 1: Conception, construction et marquageOffshore-Container und zugehrige Anschlaggarnituren -Teil 1: Offshore-Container - Auslegung, Herstellung undKennzeichnungThis European Standard was approved by CEN on 9 March 2006.CEN membe

10、rs are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application

11、to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same s

12、tatus as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia,

13、 Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN

14、 national Members.Ref. No. EN 12079-1:2006: EEN 12079-1:2006 (E) 2 Contents Page Foreword. 3 1 Scope 4 2 Normative references . 4 3 Terms and definitions. 6 4 Symbols . 8 5 Design 8 5.1 General. 8 5.2 Structural strength 9 5.3 Welding 12 5.4 Additional design details 13 5.5 Tank containers. 15 5.6 C

15、ontainers for bulk solids 16 6 Materials. 16 6.1 Steel General. 16 6.2 Rolled and extruded steels in offshore container structures. 17 6.3 Aluminium 19 6.4 Non-metallic materials 20 6.5 Material certificates. 20 7 Type testing . 21 7.1 General. 21 7.2 Test equipment and calibration. 21 7.3 Lifting t

16、est 22 7.4 Vertical impact test . 23 7.5 Other tests . 23 8 Production . 24 8.1 General. 24 8.2 Primary structure 24 8.3 Secondary structure . 26 8.4 Production testing 26 8.5 Failure of production containers. 27 9 Marking 27 9.1 Safety marking 27 9.2 Identification markings. 27 9.3 Information mark

17、ings . 28 9.4 Other markings 28 10 Container Data Plate. 28 10.1 General. 28 10.2 Contents of Data Plate 29 11 Certificate of conformity. 30 11.1 General. 30 11.2 Documentation 30 11.3 Contents of the certificate of conformity 30 Annex A (Informative) Certification Requirements for Containers. 32 Bi

18、bliography . 34 EN 12079-1:2006 (E) 3 Foreword This document (EN 12079-1:2006) has been prepared by Technical Committee CEN/TC 280 “Offshore containers and associated lifting sets”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, eith

19、er by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. This document, together with EN 12079-3:2006, supersedes EN 12079:1999. According to the CEN/CENELEC Internal Regulations, the

20、 national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Polan

21、d, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 12079-1:2006 (E) 4 1 Scope This part of EN 12079 specifies requirements for the design, manufacture and marking of offshore freight and service containers with maximum gross mass not exceeding 25000 kg, inten

22、ded for repeated use to, from and between offshore installations and ships. This part of EN 12079 specifies only transport related requirements. Other parts of the standard are: EN 12079-2, Offshore containers and associated lifting sets - Part 2: Lifting sets Design, manufacture and marking EN 1207

23、9-3, Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated ref

24、erences, the latest edition of the referenced document (including any amendments) applies. EN 287-1, Qualification test of welders Fusion welding Part 1: Steels EN 473, Non destructive testing - Qualification and certification of NDT personnel - General principles EN 571-1, Non destructive testing -

25、 Penetrant testing - Part 1: General principles EN 970, Non-destructive examination of fusion welds Visual examination EN 1289, Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels EN 1290, Non-destructive examination of welds - Magnetic particle examination of welds

26、 EN 1291, Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels EN 1435, Non-destructive examination of welds - Radiographic examination of welded joints EN 1712, Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance level

27、s EN 1714, Non-destructive examination of welds - Ultrasonic examination of welded joints EN 10002-1, Metallic materials Tensile testing Part 1: Method of test at ambient temperature EN 10025-1, Hot rolled products of structural steels - Part 1: General technical delivery conditions EN 10025-2, Hot

28、rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels EN 10025-3, Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels EN 12079-1:2006 (E) 5 EN 10

29、025-4, Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels EN 10045-1, Metallic materials Charpy impact test Part 1: Test method EN 10164, Steel products with improved deformation properties perpendicular

30、to the surface of the product - Technical delivery conditions EN 10204, Metallic products Types of inspection documents EN 10210-1, Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements EN 10219-1, Cold formed welded structura

31、l hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements EN 10250-2, Open die steel forgings for general engineering purposes Part 2: Non-alloy quality and special steels EN 10250-3, Open die steel forgings for general engineering purposes Part 3: Alloy special

32、steels EN 12517-1, Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels EN 30042, Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections (ISO 10042:1992) EN

33、 ISO 5817, Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003) EN ISO 7500-1, Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verif

34、ication and calibration of the force-measuring system (ISO 7500-1:2004) EN ISO 9606-2, Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) EN ISO 15607, Specification and qualification of welding procedures for metallic materials - General rules

35、(ISO 15607:2003) EN ISO 15609-1, Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) EN ISO 15614-1, Specification and qualification of welding procedures for metallic materials - Welding procedure te

36、st - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) EN ISO 15614-2, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) ISO 209

37、-1, Wrought aluminium and aluminium alloys - Chemical composition and forms of products Part 1: Chemical composition ISO 1161, Series 1 freight containers Corner fittings Specification ISO 1496-1, Series 1 freight containers Specification and testing Part 1: General cargo containers for general purp

38、oses EN 12079-1:2006 (E) 6 ISO 1496-3, Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk ISO 1496-4, Series 1 freight containers Specification and testing Part 4: Non-pressurized containers for dry bulk International Maritime Da

39、ngerous Goods (IMDG Code) ATEX Directive 94/9/EC 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 offshore container portable unit for repeated use in the transport of goods or equipment handled in open seas to, from and between fixed

40、 and/or floating installations and ships. NOTE The unit incorporates permanently installed equipment for lifting and handling and may include equipment for filling, emptying, cooling, heating, etc. Offshore containers are subdivided into 3 categories: 3.1.1 offshore freight container offshore contai

41、ner built for the transport of goods NOTE Examples of offshore freight containers are: general cargo container: A closed container with doors; cargo basket: An open top container for general or special cargo; tank container: A container for the transport of dangerous or non-dangerous fluids; bulk co

42、ntainer: A container for the transport of solids in bulk; special container: A container for the transport of special cargo e.g. garbage containers, equipment; boxes, gas cylinder racks. 3.1.2 offshore service container offshore container built and equipped for a special service task, usually as a t

43、emporary installation e.g. laboratories, workshops, stores, power plants, control stations 3.1.3 offshore waste skip open or closed offshore container used for the storage and removal of waste NOTE Normally constructed from flat steel plate forming the load bearing sections of the container, with br

44、acing in the form of steel profiles e.g. channel or hollow section, being fitted horizontally and/or vertically around sides and ends. In addition to the pad eyes for the lifting set, these containers may have side mounted lugs suitable for use with the lifting equipment mounted on a skip lift vehic

45、le. EN 12079-1:2006 (E) 7 3.2 permanent equipment equipment that is attached to the container and which is not cargo. NOTE This may include, e.g. lifting sets, refrigeration units, shelves, securing points, garbage compactors. 3.3 primary structure load carrying and supporting frames and load carryi

46、ng panels. Primary structure is divided into two subgroups: 3.3.1 essential /non-redundant primary structure main structural elements which transfer the cargo load to the crane hook (i.e. forming the “load path” from the payload to the lifting sling) and will include, at least: top and bottom side r

47、ails; top and bottom end rails; corner posts; pad eyes; although other primary structure may also be considered as essential /non-redundant. 3.3.2 non-essential primary structure other structural elements for which the main function is other than that described in 3.3.1 e.g. floor plates and protect

48、ive frame members. Side and roof panels, including corrugated panels, are not considered to be part of the primary structure 3.4 secondary structure parts which are not considered as load carrying for the purposes of the design calculations, including the following components: doors, wall and roof p

49、anels; panel stiffeners and corrugations; structural components used for tank protection only; internal securing points. NOTE Not all container walls are corrugated. 3.5 prototype equipment item, used for type testing, considered to be representative of the product for which conformity is being claimed. It may either be fabricated especially for type testing or selected at random from a production series 3.6 owner legal owner of the offshore container or the de