BS EN 12101-10-2005 Smoke and heat control systems - Power supplies《烟和热控制系统 电源》.pdf

1、BRITISH STANDARDBS EN 12101-10:2005Smoke and heat control systems Part 10: Power suppliesThe European Standard EN 12101-10:2005 has the status of a British StandardICS 13.220.99g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54

2、g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Mon May 08 07:24:27 BST 2006, Uncontrolled Copy, (c) BSIBS EN 12101-10:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 1 March 2006

3、BSI 1 March 2006ISBN 0 580 47901 3National forewordThis British Standard is the official English language version of EN 12101-10:2005. The UK participation in its preparation was entrusted to Technical Committee FSH/25, Smoke and heat control systems and components, which has the responsibility to:

4、A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Stan

5、dards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard

6、 does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European devel

7、opments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 51 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd

8、. No. Date CommentsLicensed Copy: Wang Bin, na, Mon May 08 07:24:27 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 12101-10October 2005ICS 13.220.99English VersionSmoke and heat control systems - Part 10: Power suppliesSystmes pour le contrle des fumes et de la

9、 chaleur -Partie 10 : Equipement dalimentation en nergieRauch- und Wrmefreihaltung - Teil 10: EnergieversorgungThis European Standard was approved by CEN on 26 August 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea

10、nStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, Fren

11、ch, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic

12、, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUR

13、OPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12101-10:2005: ELicensed Copy: Wang Bin, na, Mon May 08 07:24:27 BST 2006, Uncontrolled Copy, (c)

14、BSIEN 12101-10:2005 (E) 2 Contents Page Foreword 4 Introduction6 1 Scope .7 2 Normative references .7 3 Terms, definitions and abbreviations8 3.1 Terms and definitions.8 3.2 Abbreviations 9 4 General requirements (electrical) 10 4.1 General 10 4.2 Batteries.11 4.3 Generator sets.11 5 General require

15、ments (pneumatic)12 5.1 General 12 5.2 Power sources 12 6 Functions.15 6.1 Power supply from the primary power source (electrical).15 6.2 Power supply from the secondary power source (battery)15 6.3 Power supply from the secondary power source (generators).16 6.4 Recognition and indication of faults

16、 (electrical).17 6.5 Power supply from compressed gases.18 7 Materials, design and manufacture .20 7.1 Mechanical design 20 7.2 Electrical design .20 8 Classification.20 9 Documentation21 9.1 Users documentation 21 9.2 Design documentation .22 10 Marking 22 10.1 General 22 10.2 Gas bottles 23 11 Gen

17、eral test requirements23 11.1 Standard atmospheric conditions for testing.23 11.2 Mounting and orientation .23 11.3 Electrical connection 23 11.4 Selection of tests 23 12 Tests 26 12.1 Electrical functional test.26 12.2 Pneumatic functional test.28 12.3 Test of the charger and the secondary power so

18、urce .28 12.4 Cold (operational) .29 12.5 Damp heat, steady state (operational).30 12.6 Impact (operational)31 12.7 Vibration, sinusoidal (operational) 31 12.8 Damp heat, steady state (endurance)32 12.9 Vibration, sinusoidal (endurance)34 Licensed Copy: Wang Bin, na, Mon May 08 07:24:27 BST 2006, Un

19、controlled Copy, (c) BSIEN 12101-10:2005 (E) 3 12.10 Dry heat (operational).34 12.11 SO2corrosion35 12.12 Salt spray testing 37 12.13 Protection against water 38 12.14 Protection against solid foreign objects .38 12.15 EMC immunity tests (operational) .39 13 Evaluation of conformity 40 13.1 General

20、40 13.2 Initial type testing .40 13.3 Factory production control (FPC)41 Annex A (informative) Summary of functions 45 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive .46 ZA.1 Scope and relevant characteristics .46 ZA.2 Pro

21、cedure for attestation of conformity of power supply equipment.47 ZA.2.1 System of attestation of conformity 47 ZA.2.2 EC Certificate and Declaration of conformity .48 ZA.3 CE marking and labelling .49 Licensed Copy: Wang Bin, na, Mon May 08 07:24:27 BST 2006, Uncontrolled Copy, (c) BSIEN 12101-10:2

22、005 (E) 4 Foreword This European Standard (EN 12101-10:2005) has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text

23、or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by April 2006. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirem

24、ents of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European Standard. EN 12101 Smoke and heat control systems consists of the following: Part 1: Specification for smoke barriers, Part 2: Specification for natural smoke and heat

25、 exhaust ventilators, Part 3: Specification for powered smoke and heat exhaust ventilators, Part 4: Fire and smoke control installations Kits, Part 6: Pressure differential systems Kits, Part 7: Smoke control ducts, Part 8: Specifications for smoke control dampers, Part 9: Control panels, Part 10: P

26、ower supplies. EN 12101 is included in a series of European Standards planned to cover also: Gas extinguishing systems (EN 12094 and EN ISO 14520), Sprinkler systems (EN 12259), Powder systems (EN 12416), Explosion protection systems (EN 26184), Foam systems (EN 13565), Hose systems (EN 671), Water

27、spray systems. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Licensed Copy: Wang Bin, na, Mon May 08 07:24:27 BST 2006, Uncontrolled Copy, (c)

28、 BSIEN 12101-10:2005 (E) 5 Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Mon May 08 07:

29、24:27 BST 2006, Uncontrolled Copy, (c) BSIEN 12101-10:2005 (E) 6 Introduction Smoke and heat control systems are used to protect people, buildings and/or building contents from the effects of smoke and heat in the event of fire. The most common systems are smoke and heat exhaust ventilation systems

30、(SHEVS) and pressure differential systems. Smoke and heat exhaust ventilation systems (SHEVS) create a smoke free layer above the floor by removing smoke and thus improve the conditions for the safe escape and/or rescue of people and animals and the protection of property and permit the fire to be f

31、ought while still in its early stages. They also exhaust hot gases released by a fire in the developing stage. The use of smoke and heat exhaust ventilation systems to create smoke free areas beneath a buoyant smoke layer has become widespread. Their value in assisting in the evacuation of people fr

32、om construction works, reducing fire damage and financial loss by preventing smoke logging, facilitating fire fighting, reducing roof temperatures and retarding the lateral spread of fire is firmly established. For these benefits to be obtained it is essential that smoke and heat exhaust ventilators

33、 operate fully and reliably whenever called upon to do so during their installed life. A heat and smoke exhaust ventilation system is a scheme of safety equipment intended to perform a positive role in a fire emergency. Components for smoke and heat exhaust systems should be installed as part of a p

34、roperly designed smoke and heat system. Smoke and heat exhaust ventilation systems help to: keep the escape and access routes free from smoke; facilitate fire fighting operations by creating a smoke free layer; delay and/or prevent flashover and thus full development of the fire; protect buildings,

35、equipment and furnishings; reduce thermal effects on structural components during a fire; reduce damage caused by thermal decomposition products and hot gases. Pressure differential systems are used to either positively pressurise spaces separated from the fire or to depressurise the space containin

36、g the fire in order to limit or prevent the flow of smoke and heat into adjacent spaces. A typical use would be to pressurise an escape stair well in order to protect vertical means of escape. Depending on the design of the system, natural or powered smoke and heat ventilation can be used in a smoke

37、 and heat control system. Power supply equipment for a smoke and heat control system may be for pneumatic systems, low voltage or extra low voltage electrical systems, or a combination of any of these. Smoke and heat control system power supplies may also provide power for day to day ventilation and

38、 for other fire safety equipment under fire conditions. Licensed Copy: Wang Bin, na, Mon May 08 07:24:27 BST 2006, Uncontrolled Copy, (c) BSIEN 12101-10:2005 (E) 7 1 Scope This European Standard specifies requirements and gives test methods for primary and secondary electrical and pneumatic power su

39、pply equipment, designed for use in smoke and heat control systems in buildings. It also provides for the evaluation of conformity of such equipment to the requirements of this European Standard. NOTE A summary of functions is given in Annex A. 2 Normative references The following referenced documen

40、ts are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 286-1, Simple unfired pressure vessels designed to contain air or nit

41、rogen Part 1: Pressure vessels for general purposes EN 1964-1, Transportable gas cylinders Part 1: Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. Cylinders made of seamless stee

42、l with an Rmvalue of less than 1100 MPa prEN 12101-9, Smoke and heat control systems Part 9: Control panels EN 12205, Transportable gas cylinders Non-refillable metallic gas cylinders EN 13293, Transportable gas cylinders Specification for the design and construction of refillable transportable seam

43、less normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide EN 50130-4, Alarm systems Part 4: Electromagnetic compatibility Product family standard: Immunity requirements for components of f

44、ire, intruder and social alarm systems EN 60068-1, Environmental testing Part 1: General and guidance (IEC 60068-1:1988 + Corrigendum 1988 + A1:1992) EN 60068-2-1, Environmental testing Part 2-1: Test methods Tests A: Cold (IEC 60068-2-1:1990) EN 60068-2-6, Environmental testing Part 2-6: Test metho

45、ds Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:1990 + Corrigendum 1995) EN 60068-2-47, Environmental testing Part 2-47: Test methods Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests (IEC 60068-2-47:1999) EN 60068-2-52:1996, Environmental testing

46、 Part 2-52 Test methods Test Kb, salt mist cyclic (sodium chloride solution (IEC 60068-2-52:1996) EN 60068-2-75, Environmental testing Part 2-75: Tests Test Eh: Hammer tests (IEC 60068-2-75:1997) EN 60068-2-78, Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state (IEC 60068-2-78:

47、2001) EN 60204-1, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:1997) EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) Licensed Copy: Wang Bin, na, Mon May 08 07:24:27 BST 2006, Uncontrolled Copy, (c) BSIEN 12101-10:20

48、05 (E) 8 EN ISO 6988, Metallic and other non-organic coatings Sulphur dioxide test with general condensation of moisture (ISO 6988:1985) EN ISO 9001:2000, Quality management systems Requirements (ISO 9001:2000) EN ISO 12100-1, Safety of machinery Basic concepts, general principles for design Part 1:

49、 Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) ISO 8528-1, Reciprocating internal combustion engine driven alternating current generating sets Part 1: Application, ratings and performance ISO 8528-2, Reciprocating internal combustion engine driven alternating current generating sets Part 2: Engines ISO 8528-3, Reciprocating internal combustion engi