BS EN 12439-1999 Sterile rectal catheters for single use《一次使用消毒直肠导管》.pdf

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 12439:1999 The Euro

2、pean Standard EN 12439:1998 has the status of a British Standard ICS 11.040.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Sterile rectal catheters for single useThis British Standard, having been prepared under the direction of the Health and Environment Sector Committee,

3、 was published under the authority of the Standards Committee and comes into effect on 15 April 1999 BSI 04-1999 ISBN 0 580 30685 2 BS EN 12439:1999 Amendments issued since publication Amd. No. Date Text affected National foreword This British Standard is the English language version of EN 12439:199

4、8. The UK participation in its preparation was entrusted to Technical Committee CH/27, Medical plastics tubing, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep

5、the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European public

6、ations referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provi

7、sions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 4,

8、 an inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN

9、national Members. Ref. No. EN 12439:1998 E EUROPEAN STANDARD EN 12439 NORME EUROPE ENNE EUROPA ISCHE NORM October 1998 ICS 11.040.20 Descriptors: medical equipment, rectal catheters, disposable equipment, definitions, specifications, dimensions, designation, tensile strength, gas permeability, label

10、ling, packing, storage English version Sterile rectal catheters for single use Sondes rectales ste riles non re utilisables Sterile Rektalkatheter zur einmaligen Verwendung This European Standard was approved by CEN on 2 October 1998. CEN members are bound to comply with the CEN/CENELEC Internal Reg

11、ulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This

12、European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the

13、national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 12439:1998 BSI 04-1999 Foreword This European Standard has been prepar

14、ed by Technical Committee CEN/TC 205, Non-active medical devices, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 1999, and conflicting national stan

15、dards shall be withdrawn at the latest by April 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland

16、, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. The document is based on DIN 13273-4, Catheters for medical use Part 4: Single-use rectal catheters. Annex A is given for information only. Contents Page Foreword 2 1 Scope 3 2 Normative r

17、eferences 3 3 Definitions 3 4 Requirements 3 5 Labelling 4 Annex A (informative) Bibliography 4Page 3 EN 12439:1998 BSI 04-1999 l d = effective length = outer diameter 1 Closed, rounded tip Figure 1 Designation of dimensions 1 Scope This European Standard specifies requirements for single-use rectal

18、 catheters intended to be inserted into the rectum of a patient, for emptying, rinsing or filling purposes. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. The normative references are cited at the appropriate places in the

19、 text and the publications are listed hereafter. For dated references, subsequent amendments to, or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to

20、applies. EN 556:1994 + A1:1998, Sterilization of medical devices Requirements for terminally-sterilized medical devices to be labelled “Sterile”. EN 1041, Information supplied by the manufacturer with medical devices. EN 1618, Catheters other than intravascular catheters Test methods for common prop

21、erties. 3 Definitions For the purposes of this European Standard, the following definitions apply. 3.1 rectal catheter medical device consisting of a catheter tube, which can be fitted with a connector with tapered bore, intended to be inserted into the rectum of a patient 3.2 collapse flattening of

22、 the shaft, obstructing the flow through the catheter 4 Requirements 4.1 General The tests to ascertain that requirements are fulfilled shall be performed on the product in the ready-for-use state. 4.2 Dimensions and designation Rectal catheter dimensions should be defined as designated in Figure 1.

23、 The area of any eye shall not exceed the cross-sectional area of the lumen, and the tip shall be rounded and closed. NOTE The design of the catheter in Figure 1 is an example and is given for information only. The size and position of the catheter eyes should not compromise the stiffness required f

24、or catheter insertion. 4.3 Biocompatibility The catheter shall be evaluated for biocompatibility, and shall be free from biological hazard. NOTE Methods for evaluation for biocompatibility are given in EN 30993. 4.4 Kink stability NOTE This clause will be prepared when a test method has been develop

25、ed. 4.5 Surface When the catheter is ready for use (i.e. treated according to the manufacturers instructions) and is examined by normal or corrected-to-normal vision, the surface of the shaft, tip, and eyes shall appear free from extraneous matter. The shaft and any openings in the tip shall be desi

26、gned so as to minimize the risk of serious injury to mucous membranes. 4.6 Tensile properties When tested as described in annex B of EN 1618, the catheter shall not break and the catheter and connector shall not become separated at an applied force of 15 N or less.Page 4 EN 12439:1998 BSI 04-1999 4.

27、7 Collapse 4.7.1 When tested as described in 4.7.2, the catheter shall not collapse. 4.7.2 Place the catheter, with its eyes blocked, in a water bath at a temperature of (37 2)8C and keep it in the bath until temperature equilibrium has been reached. Apply a pressure of210 kPa to the catheter for a

28、period of 15 s. Examine the catheter for signs of collapse. 4.8 Air leakage When tested as described in annex C of EN 1618 at a test pressure of 10 kPa, the joint between the catheter and the connector shall not leak. 4.9 Sterility The catheter shall comply with EN 556:1994 + A1:1998. 5 Labelling In

29、 addition to the requirements of EN 1041, the following product-specific details shall be presented on the individual packaging: a) outer diameter, in millimetres, as designated in Figure 1; b) effective length, in millimetres, as designated in Figure 1; c) if the product contains latex, it shall be

30、 labelled to that effect. NOTE Other units of measurement can be used in addition to the SI units specified in 5a and 5b. Annex A (informative) Bibliography EN 30993, Biological evaluation of medical devices.blankBSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | |

31、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for prepa

32、ring British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or edition

33、s. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the insid

34、e front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be

35、addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wid

36、e range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996

37、7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copy

38、right subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any for

39、m or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.