BS EN 12561-8-2011 Railway applications Tank wagons Heating connections《轨道交通 油罐车 加热连接装置》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 12561-8:2011Railway applications TankwagonsPart 8: Heating connectionsIncorporating corrigendum August 2011BS EN 12561-8:2011 BRITISH STANDARDNational forewordThis British

2、Standard is the UK implementation of EN 12561-8:2011.It supersedes BS EN 12561-8:2004 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee RAE/1/-/9, Railway Applications - Wagons (Tank/Freight).A list of organizations represented on this committee can be o

3、btained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 76299 4ICS 45.060.20 Compliance with a British Standard cannot confer immunity from legal obligations

4、.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2011.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e d31 August 2011 Incorporation of CEN correction notice July 2011: modification of Figure 3EUROPEAN STANDARD

5、 NORME EUROPENNE EUROPISCHE NORM EN 12561-8 June 2011 ICS 45.060.20 Supersedes EN 12561-8:2004English Version Railway applications - Tank wagons - Part 8: Heating connections Applications ferroviaires - Wagons citernes - Partie 8 : Raccordements de rchauffage Bahnanwendungen - Kesselwagen - Teil 8:

6、HeizanschlsseThis European Standard was approved by CEN on 3 June 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograp

7、hical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili

8、ty of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, H

9、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Ce

10、ntre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12561-8:2011: EBS EN 12561-8:2011EN 12561-8:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .4

11、4 Requirements .45 Positioning of connections .46 Connection .56.1 Dimensions .56.2 Tightening device 66.3 Test pressure of connections .67 Materials .78 Marking .7Bibliography 8Figures Figure 1 Positioning of connections 5 Figure 2 Dimensions of connections .6 Figure 3 Example of tightening device

12、6 BS EN 12561-8:2011EN 12561-8:2011 (E) 3 Foreword This document (EN 12561-8:2011) has been prepared by Technical Committee CEN/TC 256 “Raiway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an

13、identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not b

14、e held responsible for identifying any or all such patent rights. This document supersedes EN 12561-8:2004. This European Standard Railway applications Tank wagons consists of the following parts: Part 1: Identification plates for tank wagons for the carriage of dangerous goods; Part 2: Bottom empty

15、ing devices for liquid products including vapour return; Part 3: Bottom filling and emptying devices for gases liquefied under pressure; Part 4: Devices for top filling and emptying of liquid products; Part 5: Devices for vapour return while filling or emptying of liquid products; Part 6: Manholes;

16、Part 7: Platforms and ladders; Part 8: Heating connections. The changes made during this revision are editorial because of the change of the title of part 1 and the necessary updates of references. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followi

17、ng countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovaki

18、a, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 12561-8:2011EN 12561-8:2011 (E) 4 1 Scope This European Standard specifies positioning of connections, connection dimensions and coupling tightening devices for connections of steam heating installations used on tank wagons. This

19、European Standard applies to new tank wagons built after the 1st January 2010. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the ref

20、erenced document (including any amendments) applies. EN 14564, Tanks for transport of dangerous goods Terminology 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 14564 and the following apply. 3.1 heating installation device heating the tank contents

21、and/or discharge equipment with steam 3.2 steam trap self contained valve which automatically drains the condensate from a steam containing enclosure while remaining tight to live steam, or if necessary, allowing steam to flow at a controlled or adjusted rate 4 Requirements The extremities of the he

22、ating installation shall be fitted as follows: each inlet shall be fitted with a valve PN 16, and a connection according to Clause 6; each outlet shall be fitted with a valve PN 16 or a steam trap. In order to drain condensate the outlet shall be situated at the lowest point of the steam heating ins

23、tallation. This outlet shall not be obstructed when the outlet valve is open. It shall be directed to the ground in such a way as not to present a danger to personnel or damage on brake parts or to other wagon equipment. 5 Positioning of connections Except by agreement between customer and manufactu

24、rer, the connections shall be positioned entirely within the areas shown in Figure 1. BS EN 12561-8:2011EN 12561-8:2011 (E) 5 The steam connections shall not infringe the loading gauge. Spaces for connections may need to be different for domestic traffic in Great Britain (see Technical Specification

25、 for Interoperability for Freight Wagons). 6 Connection 6.1 Dimensions Except for other types of connections agreed between the customer and the manufacturer, the dimensions of the connection shall be as shown in Figure 2. Dimensions in millimetres Key 1 Where tank wagons are fitted with top connect

26、ions, they shall be positioned within this area 2 Where tank wagons are fitted with bottom connections, they shall be positioned on both sides within this area Figure 1 Positioning of connections BS EN 12561-8:2011EN 12561-8:2011 (E) 6 Dimensions in millimetres Figure 2 Dimensions of connections 6.2

27、 Tightening device The connection to the steam supply pipe shall be made in a leak-tight manner. An example of a tightening device is shown in Figure 3. Figure 3 Example of tightening device 6.3 Test pressure of connections The test pressure of the connections shall be at least equal to the test pre

28、ssure of the steam heating installation. BS EN 12561-8:2011EN 12561-8:2011 (E) 7 7 Materials The materials of the fittings shall exhibit a suitable degree of safety in accordance with the maximum permissible working pressure and temperature of the heating installation. At these maximum working condi

29、tions, the materials shall be compatible with the steam where they come in contact with it. 8 Marking The maximum allowable working pressure of the heating installation shall be clearly marked on the tank wagon close to the connections. NOTE Regulation should require other marking in case of hot par

30、ts. Where the heating device can also be used for heating tank equipment, a diagrammatic representation of the use of the different devices shall be fitted on the tank wagon close to the connections. BS EN 12561-8:2011EN 12561-8:2011 (E) 8 Bibliography 1 EN 12972, Tanks for transport of dangerous go

31、ods Testing, inspection and marking of metallic tanks 2 RID, Regulations concerning the International Carriage of Dangerous Goods by Rail1)implementing Commission Directives 2003/28/EC and 2003/29/EC 3 TSI Rolling Stock Freight Wagons 4 UIC 503, Continental wagons running in Great Britain (via the C

32、hannel Tunnel and on Network Rail Infrastructure) General conditions (reference profile, axle-load, etc.) for the acceptance, in international traffic with Great-Britain, of 2-axle and bogie wagons registered with other UIC member Rus2)5 UIC 573, Technical conditions for the construction of tank wag

33、ons 1) Commonly known as RID. 2) May be purchased from: Railway Technical Publications (ETF), 16 rue Jean Rey, F-75015 Paris. This page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and ser

34、vices. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards ar

35、e updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this B

36、ritish Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically r

37、eceive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicati

38、onscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on st

39、andardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel

40、: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +

41、44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the inte

42、rnational standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. T

43、his does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: