BS EN 12697-43-2014 Bituminous mixtures Test methods for hot mix asphalt Resistance to fuel《沥青混合物 热混合沥青的试验方法 抗燃料性》.pdf

1、BSI Standards PublicationBS EN 12697-43:2014Bituminous mixtures Testmethods for hot mix asphaltPart 43: Resistance to fuelBS EN 12697-43:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12697-43:2014.It supersedes BS EN 12697-43:2005 which is withdrawn.The U

2、K participation in its preparation was entrusted to TechnicalCommittee B/510/1, Asphalt products.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsi

3、ble for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 80223 2ICS 93.080.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Pol

4、icy and Strategy Committee on 30 June 2014.Amendments issued since publicationDate Text affectedBS EN 12697-43:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12697-43 June 2014 ICS 93.080.20 Supersedes EN 12697-43:2005English Version Bituminous mixtures - Test methods for hot mix asphalt -

5、 Part 43: Resistance to fuel Mlanges bitumineux - Mthodes d essais pour mlange hydrocarbon chaud - Partie 43: Rsistance aux carburants Asphalt - Prfverfahren fr Heiasphalt - Teil 43: Treibstoffbestndigkeit This European Standard was approved by CEN on 14 May 2014. CEN members are bound to comply wit

6、h the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manag

7、ement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same sta

8、tus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malt

9、a, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN

10、 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-43:2014 EBS EN 12697-43:2014EN 12697-43:2014 (E) 2 Contents Page Foreword 3 1 Scope 7 2 Normative references 7 3 Terms and definitions .7 4 Principle 7 5 Apparatus .8 6 Fuels . 11

11、7 Preparation of test specimens 11 8 Procedure 12 8.1 Soaking in fuel and removing the fuel 12 8.1.1 Preparation for testing and immersion 12 8.1.2 Cleaning the specimen . 12 8.1.3 Loss of mass due to immersion 12 8.2 The brush test . 13 8.2.1 General . 13 8.2.2 Brush test for a porous asphalt speci

12、men using a laboratory mixer 13 8.2.3 Brush test for a non-porous asphalt specimen using a laboratory mixer 13 8.2.4 Brush test for porous asphalt specimen using an adapted milling machine 13 8.2.5 Brush test for a non-porous asphalt specimen using an adapted milling machine 14 8.3 Calculation and e

13、xpression of results 14 9 Test report . 15 10 Precision 15 BS EN 12697-43:2014EN 12697-43:2014 (E) 3 Foreword This document (EN 12697-43:2014) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the stat

14、us of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and conflicting national standards shall be withdrawn at the latest by December 2014. This document supersedes EN 12697-43:2005. Attention is drawn to the possibility that some of

15、 the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. In comparison with EN 12697-43:2005, the following significant changes were made: a) the note that jet fuel is usually used is removed;

16、b) the principle is revised and clarified; c) the oven is replaced with a conditioning chamber; d) the use of the glass rod is clarified; e) a roller compactor is included as a third alternative for compaction; f) two alternative brush test devices are included instead of just the mixer; g) wear on

17、the brush and the rotation speed of the brush are redefined; h) storage time for samples is revised compared to that used for other tests in the series; i) the depth of fuel during soaking is revised; j) the change in storage time for specimen with polymer-modified bitumen is removed; k) cleaning of

18、 specimens after soaking tightened up; l) combined parameter added to measure overall performance; m) the categories for good, moderate and poor resistance are removed; n) the estimated precision is removed. This document is one of a series of standards as listed below: EN 12697-1, Bituminous mixtur

19、es Test methods for hot mix asphalt Part 1: Soluble binder content EN 12697-2, Bituminous mixtures Test methods for hot mix asphalt Part 2: Determination of particle size distribution EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator BS EN 1

20、2697-43:2014EN 12697-43:2014 (E) 4 EN 12697-4, Bituminous mixtures Test methods for hot mix asphalt Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt Part 5: Determination of the maximum density EN 12697-6, Bituminous mixtures Test method

21、s for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma rays EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: De

22、termination of void characteristics of bituminous specimens EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt Part 10: Compactability EN 12697-11, Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen EN 12697-12, Bi

23、tuminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-14, Bituminous mixtures Test methods for hot mix asphalt Part 14: Wat

24、er content EN 12697-15, Bituminous mixtures Test methods for hot mix asphalt Part 15: Determination of the segregation sensitivity EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres EN 12697-17, Bituminous mixtures Test methods for hot mix asphalt Pa

25、rt 17: Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen EN 12697-20, Bituminous mixtures Test methods for hot mix asp

26、halt Part 20: Indentation using cube or cylindrical specimens (CY) EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel tracking EN 12697-23, Bituminous mixtures T

27、est methods for hot mix asphalt Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue EN 12697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compressi

28、on test EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness BS EN 12697-43:2014EN 12697-43:2014 (E) 5 EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-28, Bituminous mixtures Test methods for hot mix asphalt Part 28: Prepar

29、ation of samples for determining binder content, water content and grading EN 12697-29, Bituminous mixtures Test method for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen EN 12697-30, Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparatio

30、n by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor EN 12697-33, Bitu

31、minous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Laboratory mixing EN 12697-36, Bituminou

32、s mixtures Test methods for hot mix asphalt Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA EN 12697-38, Bituminous mixtures Test meth

33、ods for hot mix asphalt Part 38: Common equipment and calibration EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition EN 12697-40, Bituminous mixtures Test methods for hot mix asphalt Part 40: In situ drainability EN 12697-41, Bituminous mixtures Tes

34、t methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of foreign matter in reclaimed asphalt EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel EN 12697-44, Bit

35、uminous mixtures Test methods for hot mix asphalt Part 44: Crack propagation by semi-circular bending test EN 12697-45, Bituminous mixtures Test methods for hot mix asphalt Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test EN 12697-46, Bituminous mixtures Test methods for hot mix

36、 asphalt Part 46: Low temperature cracking and properties by uniaxial tension tests EN 12697-47, Bituminous mixtures Test methods for hot mix asphalt Part 47: Determination of the ash content of natural asphalts BS EN 12697-43:2014EN 12697-43:2014 (E) 6 prEN 12697-48, Bituminous mixtures Test method

37、s for hot mix asphalt Part 48: Interlayer Bonding1)EN 12697-49, Bituminous mixtures Test methods for hot mix asphalt Part 49: Determination of friction after polishing prCEN/TS 12697-50, Bituminous mixtures Test methods for hot mix asphalt Part 50: Resistance to scuffing1) According to the CEN-CENEL

38、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ice

39、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 1) In preparation. BS EN 12697-43:2014EN 12697-43:2014 (E) 7 1 Scope This European Standard specifies a test meth

40、od to determine the resistance of a bituminous mixture or pavement to fuels. The procedure involves initial soaking of a test specimen made in the laboratory or cored from a pavement in a fuel, followed by a brushing period with a brush test device. The material loss of the specimen is a measure of

41、the resistance to that fuel for that bituminous mixture. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the lates

42、t edition of the referenced document (including any amendments) applies. EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-30, Bit

43、uminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-33, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specime

44、n prepared by roller compactor EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Laboratory mixing EN 13108-20:2006, Bituminous mixtures Material specifications Part 20: Type Testing 3 Terms and definitions For the purposes of this document, the following term and definition

45、 applies. 3.1 fuels liquid (petroleum product) that might be spilled accidentally or sprayed deliberately onto an asphalt pavement and can cause damage to the asphalt mixture 4 Principle A cylindrical test specimen with a known mass is immersed partly in a bath with the specified fuel for a specifie

46、d period of time. After removal from the bath, cleaning with water and drying for 24 h at 25 C, the loss of mass of the specimen is measured and the immersed surface is visually inspected. Then an abrasive loading is applied onto the immersed surface of the test specimen by a steel brush mounted ont

47、o a brush test device. The steel brush moves in epicycloids passages over the surface. After 30 s the brushing stops and the specimen is removed. The loss of mass is measured and the brushed surface is visually inspected. The specimen is then put back and the same procedure is carried out again afte

48、r 30 s and after 60 s, when the brushed surface is visually inspected again. BS EN 12697-43:2014EN 12697-43:2014 (E) 8 The total brushing time is 120 s (two brushing periods of 30 s and one of 60 s). The combined material loss after the immersion and the brush test is the main parameter for the resi

49、stance to the particular fuel. As additional information the material loss after the immersion (chemical loading) and the brush test (mechanical loading) are further informative parameters for the resistance to the particular fuel. 5 Apparatus 5.1 Beaker with glass rod Cylindrical beaker made of glass for soaking the test specimen in the fuel. The