BS EN 12736-2002 Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level《电力驱动的道路车辆 用.pdf

1、BRITISH STANDARD BS EN 12736:2001 Electrically propelled road vehicles Airborne acoustical noise of vehicle during charging with on-board chargers Determination of sound power level The European Standard EN 12736:2001 has the status of a British Standard ICS 17.140.30; 43.120 BS EN 12736:2001 This B

2、ritish Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 25 October 2002 BSI 25 October 2002 ISBN 0 580 40641 5 National foreword This British Standard i

3、s the official English language version of EN 12736:2001. The UK participation in its preparation was entrusted to Technical Committee PEL/69, Electric vehicles, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-

4、references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of Br

5、itish Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; pres

6、ent to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an

7、inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN12736 December2001 ICS17.140

8、.30;43.120 Englishversion ElectricallypropelledroadvehiclesAirborneacousticalnoiseof vehicleduringchargingwithonboardchargersDetermination ofsoundpowerlevel VhiculesroutierspropulsionlectriqueBruitacoustique arienduvhiculependantlachargeavecdeschargeurs embarqusDterminationduniveaudepuissance acoust

9、ique ElektrischangetriebeneStraenfahrzeuge LuftschallemissionvonFahrzeugenwhrendderLadung mitbordeigenenLadegertBestimmungdesSchall Leistungspegels ThisEuropeanStandardwasapprovedbyCENon14October2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgiving

10、thisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyothe

11、rlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Neth

12、erlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. R

13、ef.No.EN12736:2001EEN 12736:2002 (E) 2 Contents page Foreword 3 Introduction 4 1 Scope. 4 2 Normative references 4 3 Terms and definitions . 4 4 Preconditioning of the vehicle 5 5 Preparation of vehicle . 5 6 Acoustical environment 5 6.1 Test site . 5 6.2 Background noise . 5 6.3 Environmental condi

14、tions. 5 7 Acoustical measurement device. 5 8 Operation mode. 5 8.1 Position of microphones. 5 8.2 Duration of measurement . 6 8.3 Reading 6 9 Test report . 6 9.1 Data of the test vehicle 6 9.1.1 Trade name or mark of the vehicle. 6 9.1.2 Battery 6 9.1.3 Charger 6 9.2 Test site and ambient condition

15、s . 6 9.2.1 Ambient temperature 6 9.2.2 Barometric pressure . 6 9.2.3 Relative humidity. 6 9.3 Measuring instrument description . 6 9.4 A-weighted background noise pressure level . 6 9.5 Readings of the sound pressure levels with the vehicle, expressed in dB(A) . 6 Annex A (informative) Different ai

16、rborne noise limits existing in different European countries 7EN 12736:2002 (E) 3 Foreword This document has been prepared by CEN /TC 301, “Electrically propelled road vehicles“, the secretariat of which is held by AFNOR. This document has to be implemented at national level, either by publication o

17、f an identical text or by endorsement, by June 2002, and conflicting national standards have to be withdrawn by June 2002. Annex A is for information only. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this d

18、ocument: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.EN 12736:2002 (E) 4 Introduction Electric road vehicles emit a very low level of noise when

19、being driven because the noise emission of the electric motor is negligible compared with that of an Internal Combustion (I.C.) engine. On the other hand, electric road vehicles emit noise when they are stationary and the battery is on charge. If an electric road vehicle is equipped with an on-board

20、 charger, this can be a source of noise during charging, together with a number of other components which may also be operating and producing noise. Such airborne noise should be minimised, to avoid public nuisance, and its intensity should be no higher than that permitted under existing limits or r

21、ecommendations. This is the reason why it is important to measure the noise emission of the whole vehicle under precisely defined conditions. The airborne acoustical noise emission is expressed in terms of the sound power level of the electric road vehicle. 1 Scope This standard specifies the proced

22、ure for measurement of the airborne acoustical noise emissions of electrically propelled road vehicles from category M 1 ,M 2 ,N 1 ,o rN 2 1 ) during charging, the vehicle being fitted with an on-board charger. 2 Normative references This European Standard incorporates by dated or undated reference,

23、 provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated i

24、n it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN ISO 3744: 1995, Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a re

25、flecting plane (ISO 3744:1994). ISO 362: 1998, Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method. ISO 1176:1990, Road vehicles - Masses - Vocabulary and codes. ISO 10844:1994, Acoustics - Specification of test tracks for the purpose of measuring noise emitte

26、d by road vehicles. 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 complete vehicle kerb mass VKM the definition of ISO-M06 in accordance with ISO 1176 applies. NOTE The complete vehicle kerb mass VKM includes, in addition to the de

27、finition of ISO 1176, the traction battery, on board charger, portable charger or part of it if provided as standard by the manufacturer of the vehicle. 1 ) Categories of vehicles M 1,M 2,N 1 and N 2 are defined in Directive 92/53 EECEN 12736:2002 (E) 5 4 Preconditioning of the vehicle 4.1 Before th

28、e test, the battery of the vehicle shall be discharged to a level of at least 50 % of discharge, as indicated by the state of charge meter in the vehicle. If there is no state of charge meter fitted to the vehicle, the battery shall be discharged to a level of at Ieast 50 % depth of discharge by dri

29、ving the vehicle over a distance and at a speed, which are determined by the vehicle manufacturer. 4.2 The vehicle tyres shall be inflated to the pressure specified by the vehicle manufacturer when the tyres are at the ambient temperature, thus keeping the vehicle stable on the test track. 5 Prepara

30、tion of vehicle 5.1 The test shall be carried out with the vehicle at its VKM according to IS0 1176. 5.2 The vehicle on board charger shall be connected to the mains electricity supply. 5.3 The test shall be carried out for worst case conditions; the vehicle manufacturer shall guarantee that all dev

31、ices capable of influencing the test result are in operation. Exception may be made for devices capable of operating for no more than 5 min in any period of 1 h; these may be switched off. If there are devices in the vehicle which cannot operate concurrently, the device with the Iargest influence on

32、 the test result shall operate. All devices shall operate at their normal operating power level. 6 Acoustical environment 6.1 Test site The test site shall be a track as defined in ISO 10844. 6.2 Background noise The background noise shall be at least 10 dB below the noise emitted by the vehicle und

33、er test. 6.3 Environmental conditions The ambient temperature shall be between 0 C and 42 C. It is recommended not to perform the measurements if the wind speed exceeds 5 m/s at the height of the microphone. 7 Acoustical measurement device The acoustical measurement device shall conform to the speci

34、fications defined in 5.1 in ISO 362:1998. 8 Operation mode 8.1 Position of microphones The vehicle is located at the centre of the track defined in ISO 10844. The microphone is located 2 m from the vehicle, 1,2 m above the ground for the six following positions: at the front and in the symmetry plan

35、e of the vehicle; at the rear and in the symmetry plane of the vehicle; respectively on the right and left sides and in the plane crossing the foremost axles;EN 12736:2002 (E) 6 respectively on the right and left sides and in the plane crossing the rear axles. 8.2 Duration of measurement It shall co

36、nform to the minimum values given in 7.5.3 in EN ISO 3744:1995. 8.3 Reading For each position, the total A-weighted sound power level shall be recorded. Only the highest value of the six readings shall be reported, in a similar manner as described in ISO 362. 9 Test report The following data shall b

37、e recorded in the test report. 9.1 Data of the test vehicle 9.1.1 Trade name or mark of the vehicle 9.1.2 Battery 9.1.2.1 Trade name and type of the battery 9.1.2.2 Nominal voltage 9.1.3 Charger 9.1.3.1 Trade name and type of the charger 9.1.3.2 Voltage 9.1.3.3 Maximum power 9.2 Test site and ambien

38、t conditions 9.2.1 Ambient temperature 9.2.2 Barometric pressure 9.2.3 Relative humidity 9.3 Measuring instrument description 9.4 A-weighted background noise pressure level 9.5 Readings of the sound pressure levels with the vehicle, expressed in dB(A)EN 12736:2002 (E) 7 Annex A (informative) Differe

39、nt airborne noise limits existing in different European countries Noise limits indicated in Table A.1 can not be directly compared because of the different test methods applied by different countries. Relevant legislative or other documents shall be consulted for precise information. The important n

40、ational documents are listed in the references. Table A.1 - Noise limits or noise limit recommendations in dB(A) for different countries and zones Zone I a Zone II b Zone III c Zone IV d Countries day night day night day night day night F r a n c e4 53 55 04 06 05 07 06 0 Germany 45 35(30) e 50 35 6

41、0 45 70 70 Italy 50 40 55 45 60 50 70 70 Portugal 55 45 55 45 65 55 65 55 UK f - a Specially protected areas, near hospitals and school, public parks and recreational areas. b Purely residential areas. c Mixed areas. d Purely industrial areas. e Recommended for flats belonging to hospitals only. f I

42、n the UK, no dB(A) levels are specified, but it is an offence for noise to be emitted from a vehicle if it causes a nuisance in the opinion of the local authority. The following reference documents have been used to establish Table A.1: France: Decree of 20 August 1988 Germany: Technische Anleitung

43、zum Schutz gegen Lrm (TA Lrm) (Technical guide for protection against noise). VDI Richtline 2058, Blatt 1 (VDI Code of practice 2058, Sheet 1) Italy: Gazzetta ufficiale della repubblica italiana 8/3/1991- Serie generale n. 57 pagine 47 (Official Journal of the Italian Republic General series No. 57

44、pages 4 7) Portugal: Decree 292/2000 of 14 November (General regulation on noise) United Kingdom: Noise and statutory nuisance act 1993BS EN 12736:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British St

45、andards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the co

46、nstant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover.

47、Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be add

48、ressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical