BS EN 129101-1995 Harmonized system of quality assessment for electronic components - Blank detail specification wirewound surface mounting inductors of assessed quality - Assessme.pdf

1、BRITISH STANDARD BS EN 129101:1995 Harmonized system ofquality assessment forelectronic components Blank detail specification Wirewound surface mounting inductorsof assessed quality Assessment level E The European Standard EN129101:1993, together with its amendments A1:1994 and A2:1995, has the stat

2、us of a British StandardBSEN129101:1995 BSI 01-2000 ISBN 0 580 35982 4 Committees responsible for this BritishStandard The preparation of this BritishStandard was entrusted to Technical Committee EPL/51, Transformers, inductors, magnetic components and ferrite materials, upon which the following bod

3、ies were represented: Federation of the Electronics Industry Ministry of Defence National Supervising Inspectorate (BSI PC) Amendments issued since publication Amd. No. Date CommentsBSEN129101:1995 BSI 01-2000 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2

4、1 General data 5 2 Qualification approval and Inspection requirements 6 Table 1 5 Table 2 6 Table 3 Other characteristics 6 Table 4A Lot-by-lot inspection (Group A and B) 7 Table 4B Periodic tests (Group C) 8BSEN129101:1995 ii BSI 01-2000 National foreword This BritishStandard has been prepared by T

5、echnical Committee EPL/51. It is the English language version of EN129101:1993 Blank Detail Specification: Wirewound surface mounting inductors of assessed quality Assessment level E together with amendments A1:1994 and A2:1995, prepared by CECC/WG12, Magnetic components: Inductive wound components,

6、 and published by the European Committee for Electrotechnical Standardization (CENELEC) Electronic Components Committee (CECC). This standard lists the ratings, characteristics and inspection requirements which shall be included as mandatory requirements in any detail specification for this type of

7、inductor. Detail specifications shall comply with the requirements of this Blank Detail Specification and BS CECC00111: Rule of Procedure11. Specifications. Part4:1991 Regulations for CECC Detail Specifications. The BritishStandard which implements the CECC Rules of Procedure isBS9000 General requir

8、ements for a system of electronic components of assessed quality. Part2:1991 Specification for the national implementation of the CECC system. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct appli

9、cation. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding BritishStandard EN129000:1993 BS EN129000:1996 Harmonized system of quality assessment for electronic components. Generic specification: Fixed

10、RF wound inductors EN129100:1993 BS EN129100:1995 Harmonized system of quality assessment for electronic components. Sectional specification: Wirewound surface mounting inductors. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to

11、10 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN129101 February1993 +A1 August1994 +A2 August1995 Descriptors

12、: Quality, electronic components, inductors English version Blank Detail Specification: Wirewound surface mounting inductors of assessed quality Assessment level E (includes amendments A1:1994+A2:1995) Spcification particulire cadre: (nexiste pas en franais) Vordruck fr Bauartspezifikation: Drahtgew

13、ickelte oberflchenmontierbare Spulen mit Gtebesttigung Gtebesttigungsstufe E (enthlt nderungen A1:1994+A2:1995) This European Standard was approved by the CENELEC Electronic Components Committee (CECC) on23 April1992. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations whic

14、h stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European

15、Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the n

16、ational electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. The membership of the CECC is identical, with the exception of the national electrotec

17、hnical committees of Greece, Iceland and Luxembourg. CECC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1993 Copyright reserved to CENEL

18、EC members Ref. No. EN129101:1993+A1:1994+A2:1995 EEN129101:1993 BSI 01-2000 2 Foreword The CENELEC Electronic Components Committee(CECC) is composed of those member countries of the European Committee for Electrotechnical Standardization (CENELEC) who wish to take part in a harmonized System for el

19、ectronic components of assessed quality. The object of the System is to facilitate international trade by the harmonization of the specifications and quality assessment procedures for electronic components, and by the grant of an internationally recognized Mark, or Certificate, of Conformity. The co

20、mponents produced under the System are thereby acceptable in all member countries without further testing. This specification was prepared by CECC WG12 “Magnetic components: Magnetic wound components”. The text of the draft based on document CECC (Secretariat)2865 was submitted to the formal vote; t

21、ogether with the voting report, circulated as document CECC (Secretariat)3058, it was approved by CECC as EN129101 on23 April1992. The following dates were fixed: Amendment 1 to the English version ofEN 129101:1993 Foreword The CECC voting procedure has been concluded on draft EN129101/prA1 circulat

22、ed as document CECC(Secretariat)3425/08.93 and has resulted in a positive vote. The voting report document CECC(Secretariat)3491/02.93 has been submitted for formal approval and has been accepted. The reference document was approved by CECC as an amendment to EN129101 on4 March1994. The following da

23、tes were fixed: Foreword to amendment A2 This amendment was prepared by Working GroupCLC/TC CECC/WG DE. The text of the draft based on document CECC (Secretariat)3586 was submitted to the formal vote; together with the voting report, circulated as document CECC (Secretariat)3635, it was approvedas a

24、mendment A2 to EN129101:1993 on1994-12-28. The following dates were fixed: latest date of announcement of the EN atnational level (doa)1993-06-17 latest date of publication ofan identical national standard (dop)1993-12-17 latest date of declaration ofnational standards obsolescence 1993-12-17 latest

25、 date of withdrawal ofconflicting national standards (dow)2003-06-17 latest date of announcement of the EN atnational level (doa)1994-06-27 latest date of publication ofan identical national standard (dop)1994-12-27 latest date of withdrawal ofconflicting national standards (dow)1995-12-27 latest da

26、te by which theamendment has to beimplemented at nationallevel by publicationof an identical national standardor by endorsement (dop)1995-10-24 latest date by which thenational standards conflicting with the amendment have to be withdrawn (dow) 1996-10-24EN129101:1993 BSI 01-2000 3 Identification of

27、 the detail specification (DS) and the component The page 4 of the DS should have the layout recommended on page4. The numbers in square brackets correspond to the indications to be completed thereunder: For5 and6 the text to be given in the DS should be suitable for an entry in CECC00200 and CECC00

28、300 (Library List). 1 The name of the National Standards Organization under whose authority the DS is published and, if applicable, the organization from whom the DS is available 2 The CECC symbol and the number allotted to the DS by the CECC General Secretariat 3 The number and year of availability

29、 of the EN generic and sectional specification as relevant; also national reference if different 4 If different from the CECC number, the national number of the DS, date of issue and any further information required by the national system, together with any amendment numbers 5 A brief description of

30、 the component or range of components 6 Information on typical construction (where applicable) 7 An outline drawing with main dimensions which are of importance for interchangeability, and/or reference to the appropriate national or international document for outlines. Alternatively, this drawing ma

31、y be given in an annex to the DS, but7 should always contain an illustration of the general outer appearance of the component. 8 The level(s) of quality assessment covered by the DS 9 Reference data giving information on the most important properties of the component which allow comparison between t

32、he various component types intended for the same, or for similar, applications.EN129101:1993 4 BSI 01-2000 Specification available from: CECC-29101-xxx 1 2 ELECTRONIC COMPONENTS OF ASSESSED QUALITY DETAIL SPECIFICATION IN ACCORDANCE WITH: CECC29000 (EN129000:1993) CECC EN129100:1993 3 4 Outline and

33、dimensions: (First angle projection) 7 DETAIL SPECIFICATION FOR WIRE WOUND SURFACE MOUNTING INDUCTORS 5 TYPICAL CONSTRUCTION (Examples): 6 Assessment level E 8 9 QUICK REFERENCE DATA: Rated inductance range, inductance tolerance, rated current, climatic category, performance grade Information about

34、manufacturers who have components qualified to this detail specification is available in the current CECC00200.EN129101:1993 BSI 01-2000 5 1 General data 1.1 Recommended method of mounting The inductors are mounted by their terminations. See1.3.2 of the sectional specification EN129100:1993 1.2 Dime

35、nsions Table 1 NOTEThe dimensions shall be given as maximum dimensions or as nominal dimensions with a tolerance. Soldering pads for measuring and testing on printed boards 1.3 Ratings and characteristics Case size reference Dimensions (inmm) L W H Case Size reference A B C mm Rated inductance range

36、 (See Table 2) Tolerance on rated inductance . . . . . Q-factor d.c. resistance (See Table 2) Self-resonant frequency Rated current Climatic category . . . . . Rated temperature . . . . .EN129101:1993 6 BSI 01-2000 Table 2 1.4 Related documents 1.5 Marking The marking of the inductor and of the pack

37、ing shall be in accordance with the requirements of1.5 of the sectional specification EN129100:1993. NOTEThe details of the marking of the component and of packing shall be given in full in the detail specification. 1.6 Ordering information Orders for inductors covered by this specification shall co

38、ntain, in clear or in coded form, the following minimum information: 1) Rated inductance 2) Tolerance on rated inductance 3) Number and issue reference of detail specification and case size reference 4) Packaging (bulk or taped; if taped, according to IEC286-3) 1.7 Certified test records Required/no

39、t required 1.8 Additional information (not for inspection purpose) 1.9 Additional or increased severities or requirements to those specified in the generic and/or sectional specification NOTEAdditions or increased requirements should be specified only when essential. Table 3 Other characteristics 2

40、Qualification approval and Inspection requirements 2.1 Procedures 2.1.1 For Qualification Approval the procedures shall be in accordance with3.4 of the sectional specificationEN129100:1993. L R f L Q min. f Q R max. f res min. I R I CR Type of core-material nH MHz MHz 7 MHz mA mA I CR I R L R Q R :

41、: : : : incremental current rated current rated inductance quality factor d.c. resistance f L f Q f r : : : measuring frequency for inductance measuring frequency for Q resonant frequency Generic specification : CECC29000 (EN129000:1993) Sectional specification: EN129100:1993 This table is to be use

42、d for defining characteristics which are additional to or tighter than those given in the sectional specification.EN129101:1993 BSI 01-2000 7 2.1.2 For Quality Conformance Inspection the test schedule (Table 4A and Table 4B) includes sampling, periodicity, severities and requirements. The formation

43、of inspection lots is covered by3.5.1 of the sectional specification EN129100:1993. Table 4A Lot-by-lot inspection (Group A and B) Notes to Table 4A and Table 4B (1) Clause numbers of tests and performance requirements refer to the sectional specification EN129100:1993. (2) D = destructive ND = non

44、destructive P = periodicity (in months) n = number of specimens (sample size) c = number of permissible defectives (acceptance criterion) IL = inspection level (selected from IEC410) AQL = acceptable quality level (selected from IEC410) (3) Not applicable to surface mounting inductors, which accordi

45、ng to their detail specification shall only be mounted on alumina substrates (4) Not necessarily to be performed when covered by lot-by-lot testing Sub-clause number and test (1) D or ND Conditions of test (1) IL AQL Performance requirements (1) (2) (2) Sub-group A1 ND S4 2,5 4.2 Visual examination

46、No visible damage Marking legible, see1.5 4.2 Dimensions (Detail) See Table 1 of this specification Sub-group A2 ND II 1,0 4.3.1 4.3.2 Inductance Q-factor Within specified tolerance See Table 2 of this specification Sub-group A3 ND S3 1,0 4.3.3 4.3.4 Self-resonant- frequency D.C. resistance See Tabl

47、e 2 of this specification Sub-group B1 D S3 2,5 4.7 4.13.2 4.7.3 Solderability Solvent resistance of the marking (if required) Final measurement Method: . . . . Solvent: Solvent temperature: Method1 Rubbing material: Cotton wool Recovery: . . . Visual examination Marking legible As in 4.7.3 Notes se

48、e page7EN129101:1993 8 BSI 01-2000 Table 4B Periodic tests (Group C) Sub-clause number and test (1) D or ND (2) Conditions of test (1) P n (2) c Performance requirements (1) Sub-group C1 D 3 12 1 4.6.1 Initial measurements Inductance 4.6 Resistance to soldering heat Method:. . . . - - - 4.13.1 Compo

49、nent solvent resistance (if required) Solvent:. . . Solvent temperature:. . . Method2 Recovery:. . . 12 No visible damage - - - 4.6.3 Final measurement Visual examination Inductance As in 4.6.3 k . . . % Sub-group C2 D 6 12 1 4.5.2 Inductance For reference 4.5 Substrate bending test (3) Inductance (with board in bent position) Deflection:. . .mm Number of bends:. . . k . . . % compared to value in 4.5.2 4.5.6 Final measurement Visual examination No visi