BS EN 12962-2011 Adhesives Determination of elastic behaviour of liquid adhesives (elasticity index)《粘合剂 液体粘合剂弹性性能测定(弹性指数)》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 12962:2011Adhesives Determinationof elastic behaviour of liquidadhesives (elasticity index)BS EN 12962:2011 BRITISH STANDARDNational forewordThis British Standard is the UK

2、 implementation of EN 12962:2011. Itsupersedes BS EN 12962:2001 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/52, Adhesives.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not

3、purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 72240 0ICS 83.180Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStanda

4、rds Policy and Strategy Committee on 31 May 2011.Amendments issued since publicationDate Text affectedBS EN 12962:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12962 April 2011 ICS 83.180 Supersedes EN 12962:2001English Version Adhesives - Determination of elastic behaviour of liquid adhe

5、sives (elasticity index) Adhsifs - Dtermination du comportement lastique des adhsifs liquides (indice dlasticit) Klebstoffe - Bestimmung des elastischen Verhaltens flssiger Klebstoffe (Elastizittsindex) This European Standard was approved by CEN on 10 March 2011. CEN members are bound to comply with

6、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manage

7、ment Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same stat

8、us as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal

9、, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means res

10、erved worldwide for CEN national Members. Ref. No. EN 12962:2011: EBS EN 12962:2011EN 12962:2011 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .54 Principle 55 Apparatus .56 Procedure .57 Expression of results 78 Test report 7Bibliography 8BS E

11、N 12962:2011EN 12962:2011 (E) 3 Foreword This document (EN 12962:2011) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by

12、 endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for

13、 identifying any or all such patent rights. This document supersedes EN 12962:2001. The main modifications regarding the previous version are in Figure 1 and 6.10. SAFETY STATEMENT Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does n

14、ot purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT It is understood that some of the material per

15、mitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an approp

16、riate disposal of the wastes, according to local regulation. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia

17、, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 12962:2011EN 12962:2011 (E) 4 Introduction Many liquid elastomeric

18、adhesives show, depending on the nature of basic elastomer, under specific conditions an elastic behaviour. The elastic behaviour of an adhesive apart of its viscosity is of great practical significance. It affects both processability (by brush or roller) of an adhesive and its bonding properties to

19、 porous substrates like wood, leather or fabric. For achieving optimum bond strength on porous substrates it is indispensable to adjust both viscosity and elasticity to the porosity of the substrates to be bonded. At a given viscosity, if the elasticity is too high, the adhesive will only rest on th

20、e surface of the substrate without penetration and anchoring in the substrate. If, on the contrary, the elasticity is too low, the adhesive is almost completely absorbed by the porous substrate without being able to form a bond-line. In both cases a lower bond strength results. A “cone and plate rhe

21、ometer“ as specified in EN 12092 allows to determine viscosity and elasticity of an adhesive by measurement of shear tension and tension vertical to shear tension (“normal tension“). However, a “cone and plate rheometer“ is very expensive and its maintenance too, operating requires a skilled staff,

22、and cleaning is time-consuming. It is mainly used for scientific purposes. BS EN 12962:2011EN 12962:2011 (E) 5 1 Scope This European Standard specifies a test method to determine the elastic behaviour of and elastomeric monocomponent liquid adhesive under specified conditions. This method is particu

23、larly suitable for production control. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendmen

24、ts) applies. EN 923:2005+A1:2008, Adhesives Terms and definitions EN 1067, Adhesives Examination and preparation of samples for testing EN ISO 15605, Adhesives Sampling (ISO 15605:2000) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008

25、apply. 4 Principle A specifically shaped and graduated spindle (see Figure 1) is dipped into the adhesive to be tested. The shaft of the spindle is attached to a motor rotating at a constant specified speed for a certain period of time. During rotation, the adhesive under test rises (in equilibrium

26、to gravitation) up to a reproducible height on reading of the spindle shaft. The height (in millimetres) measured is taken as “elasticity index“. 5 Apparatus 5.1 Beakers, of 100 mm diameter, capacity about 1 000 ml (see Figure 1). 5.2 Spindle, with size and dimensions shown in Figure 1, with marking

27、s at 10 mm intervals and sub-graduated to millimetres. 5.3 Mechanical or electronic stirrer, with the possibility of fine speed control. 5.4 Analytical balance, with scale divisions of 0,01 g. 5.5 Stopwatch, or other suitable timing-device with accuracy of 0,2 s or higher. 5.6 Temperature-controlled

28、 room or enclosure, capable of maintaining the sample and the necessary apparatus at (23,0 0,5) C. 6 Procedure 6.1 Carry out the determination in duplicate. BS EN 12962:2011EN 12962:2011 (E) 6 6.2 A significant sample of the adhesive shall be taken in accordance with EN ISO 15605 and prepared for te

29、sting as described in EN 1067. Store the sample in a closed container and keep it in the temperature-controlled room (5.6) until the sample reaches (23 2) C (at least 30 min). In order to minimize evaporation of solvent, the operations from 6.3 to 6.8 shall be carried out in the shortest possible ti

30、me. 6.3 Weight (200,0 0,1) g of the adhesive under test into the beaker (5.1). 6.4 Place the beaker containing the adhesive under the stirrer (5.3) taking care to centre the beaker. Dimensions in millimetres Key 1 Solution level Figure 1 Spindle BS EN 12962:2011EN 12962:2011 (E) 7 6.5 Dip slowly the

31、 spindle (5.2) into the adhesive avoiding trapping air bubbles in the liquid (for example hold the spindle at an angle of approximately 45 to the surface of the product and manually turn during the immersion). 6.6 Insert the spindle in the mandrel of the stirrer. 6.7 Regulate the spindle immersion u

32、ntil the liquid reaches the highest part of the cone: position zero, and lock the mandrel of the stirrer. 6.8 Protect the adhesive by covering the beaker with a properly shaped paper. 6.9 Start the motor set at the speed of (300 10) min-1. 6.10 Start the stopwatch simultaneously with the motor and t

33、hen stop both after (30 1) s from the starting. 6.11 Read and note the height reached by the adhesive on the shaft of the spindle for the test report. Ignore any value exceeding 50 mm and the results of any tests during which an irregular, irreproducible behaviour of the adhesive on the rotating sti

34、rrer was stated, e.g. a “throwing“ caused by centrifugal forces. 6.12 Clean the spindle with a suitable solvent (acetone, aliphatic hydrocarbons or ethanol) and repeat the measurement. 6.13 Take the average of the two values measured. 7 Expression of results Express the “elasticity index“ as the mea

35、n of the duplicate determination (6.11) in millimetres rounded to the nearest 1 mm. 8 Test report The test report shall include: a) a reference to this European Standard, i.e. EN 12962; b) all details necessary for a complete identification of the adhesive tested; c) any circumstances which may have

36、 affected the result; d) the test results according to Clause 7, individual and mean values; e) date of the test. BS EN 12962:2011EN 12962:2011 (E) 8 Bibliography EN 12092, Adhesives Determination of viscosity This page deliberately left blankBSI is the independent national body responsible for prep

37、aring British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswi

38、ck High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices.

39、 We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an i

40、ndividual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the

41、 website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that h

42、ave been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information

43、 services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these an

44、d other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI p

45、ublications. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electroni

46、c, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: