BS EN 13025-1-2005 Packaging — Light gauge metal containers — Part 1 Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40000 ml《包装 轻型金属包装.pdf

1、BRITISH STANDARDBS EN 13025-1:2005Packaging Light gauge metal containers Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 mlThe European Standard EN 13025-1:2005 has the status of a British StandardICS 55.120; 55.140g49g50g3g38g50g51g60g44g

2、49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIBS EN 13025-1:2005This British Standard

3、 was published under the authority of the Standards Policy and Strategy Committee on 31 March 2006ISBN 0 580 47903 XNational forewordThis British Standard is the official English language version of EN 13025-3:2005. Together with BS EN 13025-2:2005 and BS EN 13025-3:2005 it supersedes BS EN 13025:20

4、00 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PKW/0, Packaging, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals fo

5、r change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or Eur

6、opean publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include a

7、ll the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and

8、 a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Comments BSI 2006Licensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPIS

9、CHE NORMEN 13025-1November 2005ICS 55.120; 55.140 Supersedes EN 13025:2000 English VersionPackaging - Light gauge metal containers - Part 1: Nominalfilling volumes for round, cylindrical and tapered general usemetal containers up to 40 000 mlEmballage - Emballages mtalliques lgers - Partie 1:Volumes

10、 nominaux de remplissage des rcipientsmtalliques cylindriques, ronds et coniques usagegneral dun volume infrieur ou gal 40 000 mlVerpackungen - Feinstblechverpackungen - Teil 1:Nennfllvolumen von runden, zylindrischen und konischenwiederverschliebaren Behltern bis 40 00 mlThis European Standard was

11、approved by CEN on 12 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nat

12、ionalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and noti

13、fied to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland

14、s, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and b

15、y any means reservedworldwide for CEN national Members.Ref. No. EN 13025-1:2005: ELicensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-1:2005 (E) 2 Contents Page Foreword 3 Introduction4 1 Scope .5 2 Nominal filling volumes5 3 Drainability 5 Annex A (informat

16、ive) Recommended nominal diameters of round cylindrical and tapered general use metal containers of up to 40 000 ml6 Annex B (normative) Draining test methods for general use metal containers and drums7 Bibliography.9 Licensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c)

17、BSIEN 13025-1:2005 (E) 3 Foreword This European Standard (EN 13025-1:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text o

18、r by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. This European Standard supersedes EN 13025:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound

19、to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United

20、Kingdom. Licensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-1:2005 (E) 4 Introduction Efficient packaging is of great importance for the distribution and the protection of goods. Insufficient or inappropriate packaging can lead to damage or wastage of the c

21、ontents of the pack. NOTE Part 1 of this European Standard is a generic representation of the range of light metal containers of the given diameters to a maximum capacity of 40 000 ml. Further parts may be added to this European Standard to impart more specific detail of different container types. S

22、uch additional parts, however, will remain within the parameters of Part 1. Annex A on the recommended nominal diameters of round cylindrical and tapered general use metal containers of up to 40 000 ml is for information only. Annex B on test methods for drainability is normative. The Bibliography g

23、ives reference to Standards useful in the manufacture of light gauge metal packaging. Licensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-1:2005 (E) 5 1 Scope This European Standard specifies the range of nominal filling volumes in common use for round cylin

24、drical and tapered general use containers of up to 40 000 ml volumetric capacity, metal thickness not exceeding 0,49 mm nominal. Recommended diameters related to this range of nominal filling volumes are shown in an Annex A to this European Standard. 2 Nominal filling volumes Nominal filling volumes

25、 for round cylindrical and tapered general use metal containers of up to 40 000 ml shall be as stated in Table 1. Table 1 Nominal filling volumes Nominal filling volume in ml 75 100 125 150 200 250 375 500 750 1 000 1 500 2 000 2 500 3 000 4 000 5 000 10 000 12 500 15 000 17 500 20 000 22 500 25 000

26、 30 000 40 000 3 Drainability Drainability shall be measured using the method given in Annex B. Licensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-1:2005 (E) 6 Annex A (informative) Recommended nominal diameters of round cylindrical and tapered general use

27、metal containers of up to 40 000 ml Recommended Nominal Diameters of Round Cylindrical and Tapered General use Metal Containers of up to 40 000 ml should be as stated in Table A.1. Those diameters in bold are strongly recommended. The diameters quoted are as defined in EN ISO 90-2 and the tolerances

28、 of 1 mm for diameters up to 153 mm and 2 mm for diameters larger than 153 mm are those permitted in calculating the nominal diameters. They are intended to cover different manufacturing methods rather than manufacturing process variability as shown in EN 10202 and EN 541. Tolerance: 1 mm, diameters

29、 up to 153 mm 2 mm, diameters larger than 153 mm Table A.1 Recommended Nominal Diameters of Round Cylindrical and Tapered General use Metal Containers of up to 40 000 ml Nominal Filling Volume - ml Nominal Diameter Cylindrical mm Nominal Diameter Tapered mm 75 52- 56-73-90-79 -100 52-56-60-65-73-90-

30、79 - 125 52-56-60-65-73-79 -150 52-56-60-65-73-99-108 - 200 52-56-60-65-73-83-99-108 - 250 52-56-60-65-73-83-90-95-99-108 -375 52-56-65-73-79-83-86-90-95-99-108 -500 56-65-73-79-83-86-90-95-99-108 -750 56-73-79-83-86-90-99-108-113-127 - 1 000 73-79-83-86-90-99-108-113-127-130-140 140 1 500 73-86-99-

31、108-113-127-130-140-153 -2 000 99-127-130-140-153-160-165-171-175 160-165-180-198 2 500 127-130-140-153-160-163-165-168-171-180 160-165-168-180-190-198 3 000 153-160-163-165-168-171-175-180-190 160-165-168-180-190-198 4 000 153-160-163-165-171-175-180-190 160-165-168-180-185-190-198 5 000 153-160-16

32、5-171-175-180-185-190-215-230 160-165-168-180-185-190-198-230-220-24210 000 215-220-225-230-240-260-286-292 220-230-240-242-274-286-292-305 12 500 220-230-242-260-286-292-300 220-230-240-242-274-286-292-305 15 000 230-260-280-286-292-300 242-274-280-286-292-305 17 500 280-286-292-300-305 274-280-286

33、-292-305 20 000 280-286-292-300-305-315 274-280-286-292-305-315-328 22 500 280-286-292-300-305 280-286-292-305-328 25 000 280-286-292-300-305 280-286-292-300-305-328 30 000 280-286-292-300-305-315-328 286-292-305-315-328-375 40 000 305-328-355 292-305-328-375-380 Licensed Copy: Wang Bin, na, Mon May

34、 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-1:2005 (E) 7 Annex B (normative) Draining test methods for general use metal containers and drums B.1 Principle The absolute drainability and the relative drainability are obtained by determining the mass of water left as a residue in the gen

35、eral use containers or drums after drainage under gravity. B.2 Apparatus Weighing scale, with an accuracy adapted to the measurement. B.3 Determination of drainability using the top section of the drum (procedure A) Cut the top from the drum ensuring that sufficient side wall remains attached to the

36、 top to preclude distortion of the top during the cutting operation and retention of the specified volume of liquid, at the specified angle, during the test. Fit designated closure(s) to the top and weigh. Record mass m1in grams. Position the top section, top down, on a test rig so that it is held a

37、t the angle specified by the manufacturer (preferably 0 to 20) with the designated closure opening at its lowest position. Fill the top section with at least 5 % of the original drum volume. When the water surface has settled, open the closure. Allow the water to drain for 5 min without moving or sh

38、aking the top section, refit the closure and re-weigh the top section, still in the top down position, recording its mass, m2, in grams. B.4 Determination of drainability for general use containers and drums (procedure B) Weigh the empty container including its closure(s) and record its mass, m1, in

39、 grams. Fill the container with a limited quantity of tap water, approximately 5 % of its volume. Close the drum. Rotate or shake the container to ensure a wetting of all inner surfaces. Open the container and place it in a horizontal position with the designated closure opening in its lowest positi

40、on and leave until the liquid flow stops (position 1 as shown in Figure B.1). Slowly incline the container up to the manufacturers recommended angle which ensures the optimal draining (preferably 0 to 20) and leave the container in this position for 5 min (position 2 as shown in Figure B.1), without

41、 moving or shaking the container. Fit and secure the designated closure and remove any surplus water from the outside. Licensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-1:2005 (E) 8 Weigh the emptied container and record its mass, m2, in grams. Key 1 Posit

42、ion 1 2 Position 2 3 Designated closure Figure B.1 Positions of containers or drums B.5 Expression of results The difference between the mass of the emptied container, m2, and the mass of the empty container m1, (m2 - m1) represents the residue in the drum and is termed the absolute drainability of

43、the container. The relative drainability of a container is obtained by expressing the absolute drainability as a percentage of the total capacity. Licensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIEN 13025-1:2005 (E) 9 Bibliography 1 EN ISO 90-2, Light-gauge metal

44、containers - Definitions and determination of dimensions and capacities Part 2 :General use containers (ISO 90-2:1997). 2 EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000). 3 EN 10130 + A1:1998, Cold r

45、olled low carbon steel flat products for cold forming - Technical delivery conditions. 4 EN 10131, Cold rolled uncoated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape. 5 EN 10202, Cold reduced tinmill products - Electrolytic tinplate and

46、electrolytic chromium/chromium oxide coated steel. 6 EN 12928, Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l. 7 EN 13029, Packaging Light-gauge metal packaging Apertures for plug-in plastic closures. 8 EN 541, Aluminium and aluminium alloys Rolled produc

47、ts for cans, closures and lids Specifications. Licensed Copy: Wang Bin, na, Mon May 15 08:33:19 BST 2006, Uncontrolled Copy, (c) BSIBS EN 13025-1:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards

48、. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim

49、 of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buyin