BS EN 13146-9-2009 Railway applications - Track - Test methods for fastening systems - Determination of stiffness《轨道交通 轨道 紧固系统的试验方法 刚度测定》.pdf

1、BS EN13146-9:2009ICS 93.100NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDRailway applications Track Test methodsfor fastening systemsPart 9: Determination of stiffnessLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/04/2010 03:47, Uncontrolled Copy, (

2、c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 59312 3Amendments/corrigenda issued since publicationDate CommentsBS EN 13146-9:2009National forewordThis British Standard is the UK implementation of

3、 EN 13146-9:2009. The UK participation in its preparation was entrusted to TechnicalCommittee RAE/2, Railway track components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a

4、 contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/04/2010 03:47, Uncontrolled Copy, (c) BSIBS EN 13146-9:2009EUROPEAN STANDARD NORME EUROPENNE EUROPIS

5、CHE NORM EN 13146-9 November 2009 ICS 93.100 English Version Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness Applications ferroviaires - Voies - Mthodes dessai pour les systmes de fixation - Partie 9 : Dtermination de la raideur Bahnanwendungen

6、- Oberbau - Prfverfahren fr Schienenbefestigungssysteme - Teil 9: Bestimmung der Steifigkeiten This European Standard was approved by CEN on 3 October 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

7、status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German

8、). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Rep

9、ublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN D

10、E NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13146-9:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/04/20

11、10 03:47, Uncontrolled Copy, (c) BSIBS EN 13146-9:2009EN 13146-9:2009 (E) 2 Contents Page Foreword . 3Introduction 41 Scope 52 Normative references . 53 Terms and definitions . 54 Symbols and abbreviated terms 65 Verification of calibration . 86 Test procedures for pads . 86.1 Static test procedure

12、for pads . 86.1.1 Principle . 86.1.2 Apparatus 86.1.3 Procedure 96.1.4 Test report . 106.2 Dynamic low frequency test procedure for pads 116.2.1 General . 116.2.2 Principle . 116.2.3 Apparatus 116.2.4 Procedure 126.2.5 Test report . 126.3 Dynamic high frequency test procedure for pads . 137 Test pro

13、cedures for complete rail fastening assemblies . 137.1 Static test procedure for fastening assemblies . 137.1.1 Principle . 137.1.2 Apparatus 137.1.3 Test specimens . 147.1.4 Procedure 147.1.5 Test report . 147.2 Dynamic low frequency test for fastening assemblies . 157.2.1 General . 157.2.2 Princip

14、le . 157.2.3 Apparatus 157.2.4 Procedure 167.2.5 Test report . 167.3 Dynamic high frequency test for assemblies 177.3.1 Principle . 177.3.2 Apparatus 177.3.3 Test specimen . 207.3.4 Test procedure 207.3.5 Test report . 24Annex A (informative) Determination of the dynamic high frequency stiffness of

15、pads 25A.1 General . 25A.2 Principle . 25Bibliography . 26Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/04/2010 03:47, Uncontrolled Copy, (c) BSIBS EN 13146-9:2009EN 13146-9:2009 (E) 3 Foreword This document (EN 13146-9:2009) has been prepared by Technical Committee CEN/TC 256 “Railway a

16、pplications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. At

17、tention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Standard is one of the series EN 13146, Railway applications Track Test me

18、thods for fastening systems as listed below: Part 1: Determination of longitudinal rail restraint Part 2: Determination of torsional resistance Part 3: Determination of attenuation of impact loads Part 4: Effect of repeated loading Part 5: Determination of electrical resistance Part 6: Effect of sev

19、ere environmental conditions Part 7: Determination of clamping force Part 8: In-service testing Part 9: Determination of stiffness These support the requirements in the series EN 13481, Railway applications Track Performance requirements for fastening systems Parts 1 to 8. According to the CEN/CENEL

20、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo

21、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/04/2010 03:47, Uncontrolled Copy, (c) BSIBS EN 13146-9:2009EN 13146-9:2009 (E) 4 Introduction This part of EN 1

22、3146 brings together test methods for measuring the stiffness of pads and fastening assemblies under static, low frequency and high frequency dynamic loading. For measurements at high frequency, the corrected driving point method has been included although it is only valid up to 120 Hz whilst the di

23、rect and indirect methods are valid up to 400 Hz. Only a few test laboratories have the equipment and the experience necessary to perform the indirect and direct methods. More laboratories should be able to perform the corrected driving point method and for some purposes, measurements up to 120 Hz a

24、re adequate. No method for testing at acoustic frequencies is included. The procedure in EN 15461, which involves testing a length of track incorporating the fastening assemblies under test can be used. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/04/2010 03:47, Uncontrolled Copy, (c) B

25、SIBS EN 13146-9:2009EN 13146-9:2009 (E) 5 1 Scope This European Standard specifies laboratory test procedures to determine the static and dynamic stiffness of rail pads, baseplate pads and complete rail fastening assemblies. The procedures for dynamic stiffness cover low and high frequencies. 2 Norm

26、ative references The following documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13146-4, Railway applications Track Test

27、 methods for fastening systems Part 4: Effect of repeated loading EN 13481 (all parts), Railway applications Track Performance requirements for fastening systems EN ISO 7500-1, Metallic materials Verification of static uniaxial testing machines Part 1: Tension/compression testing machines Verificati

28、on and calibration of the force-measuring system (ISO 7500-1:2004) EN ISO 9513:2002, Metallic materials Calibration of extensometers used in uniaxial testing (ISO 9513:1999) EN ISO 10846-1:2008, Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient element

29、s Part 1: Principles and guidelines (ISO 10846-1:2008) EN ISO 10846-2, Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2

30、:2008) EN ISO 10846-3, Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002) EN ISO 10846-5, Acoustics and vibration

31、 Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008) 3 Terms and definitions For the purposes of this document, the te

32、rms and definitions given in EN 13481-1:2002 and EN ISO 10846-1:2008 apply. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/04/2010 03:47, Uncontrolled Copy, (c) BSIBS EN 13146-9:2009EN 13146-9:2009 (E) 6 4 Symbols and abbreviated terms Relevant subclause FSPmax force applied to pad in mea

33、surement of static stiffness of pad, in kN; 6.1.3 FSP1 notional fastening clip force assumed for measurement of static stiffness of pad, in kN; 6.1.3 FSP20,8 FSPmax, in kN; 6.1.3 kSP static stiffness of pad, in MN/m; 6.1.3 dSP mean vertical displacement of pad, in mm; 6.1.3 FLFPmax reference force f

34、or measurement of dynamic low frequency stiffness of pad, in kN; 6.2.4 FLFP1notional fastening clip force assumed for measurement of dynamic low frequency stiffness of pad, in kN; 6.2.4 FLFP2 0,8 FLFPmax, in kN; 6.2.4 dLFP displacement of pad in measurement of low frequency dynamic stiffness of pad,

35、 in mm; 6.2.4 fLFP frequency of measurement of low frequency measurement dynamic stiffness of pad, in Hz; 6.2.4 kLFPflow frequency dynamic stiffness of pad at a specific frequency, in MN/m; 6.2.4 kLFPmean mean of measurements of low frequency dynamic stiffness of pad measured at 5 Hz, 10 Hz and 20 H

36、z, in MN/m; 6.2.4 FSAmax force applied to assembly in measurement of static stiffness of assembly, in kN; 7.1.4 kSA static stiffness of assembly, in MN/m; 7.1.4 dSA mean displacement of rail in measurement of static stiffness of assembly, in mm; 7.1.4 FSA1 minimum force applied in measurement of sta

37、tic stiffness of assembly, in kN; 7.1.4 FSA2 maximum force applied in measurement of static stiffness of assembly = 0,8 FLFAmax, in kN;7.1.4 kLFAlow frequency dynamic stiffness of assembly, in MN/m; 7.2.4 FLFA1 minimum force applied in measurement of dynamic low frequency stiffness of assembly, in k

38、N; 7.2.4 FLFA2maximum force applied in measurement of dynamic low frequency stiffness of assembly = 0,8 FLFAmax, in kN; 7.2.4 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/04/2010 03:47, Uncontrolled Copy, (c) BSIBS EN 13146-9:2009EN 13146-9:2009 (E) 7 FLFAmax reference force for measure

39、ment of dynamic low frequency stiffness of assembly, in kN; 7.2.4 dLFA1 displacement of assembly in measurement of dynamic low frequency stiffness of assembly for force FLFA1, in mm; 7.2.4 dLFA2 displacement of assembly in measurement of dynamic low frequency stiffness of assembly for force FLFA2, i

40、n mm; 7.2.4 FHFAmax static preload applied in measurement of high frequency stiffness of assembly, in kN; 7.3.4.3 aHFAD1 excitation acceleration in measurement of high frequency stiffness of assembly, in m/s2; 7.3.4.3 aHFAD2 acceleration of the measuring platform in measurement of high frequency sti

41、ffness of assembly, in m/s2; 7.3.4.3 aHFAI2output acceleration in measurement of high frequency stiffness of assembly by the indirect method, in m/s; 7.3.4.4 FHFAD2force on the measuring platform in measurement of high frequency stiffness of assembly, in N; 7.3.4.3 fHFADfrequency in measurement of h

42、igh frequency stiffness of assembly, in Hz; 7.3.4.3 j -1 7.3.4.3 LHFADktransfer stiffness level in measurement of high frequency stiffness of assembly, in dB re 1 N/m; 7.3.4.3 mHFADmass of the measuring platform and any parts of the fastening assembly below the resilient element, in kg; 7.3.4.3 kHFA

43、Dtransfer stiffness in measurement of high frequency stiffness of assembly, in N/m; 7.3.4.3 kHFADc corrected transfer stiffness in measurement of high frequency stiffness of assembly, in N/m; 7.3.4.3 HFAD1excitation velocity = HFAD1HFADaj, in m/s; 7.3.4.3 HFADangular frequency = 2 fHFAD, in rad/s; 7

44、.3.4.3 FHFAI2force on the measuring platform of high frequency stiffness of assembly, in N; 7.3.4.4 kHFAI transfer stiffness in measurement of high frequency stiffness of assembly by the indirect method, in N/m; 7.3.4.4 HFAIangular frequency = 2 fHFAI, in rad/s; 7.3.4.4 aHFAI1 excitation acceleratio

45、n in measurement of high frequency stiffness of assembly by the indirect method, in m/s2; 7.3.4.4 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 01/04/2010 03:47, Uncontrolled Copy, (c) BSIBS EN 13146-9:2009EN 13146-9:2009 (E) 8 aHFAP1excitation acceleration in measurement of high frequency

46、stiffness of assembly by driving point method, in m/s2; 7.3.4.5 aHFAPccorrection acceleration of the measuring platform in measurement of high frequency stiffness of assembly by driving point method, in m/s2; 7.3.4.5 FHFAP1dynamic input force in measurement of high frequency stiffness of assembly by

47、 driving point method, in N; 7.3.4.5 FHFAPcdynamic input force without the rail fastening assembly in measurement of high frequency stiffness of assembly by point method, in N; 7.3.4.5 LHFAPk point stiffness level, in dB re 1 N/m; 7.3.4.5 kHFAPccorrected point stiffness, in N/m. 7.3.4.5 5 Verificati

48、on of calibration The static calibration of actuators shall be verified in accordance with EN ISO 7500-1 using equipment having traceability to European or International Standards using the International System of Units (SI). The calibration of displacement measuring instruments with contact shall b

49、e in accordance with EN ISO 9513. 6 Test procedures for pads 6.1 Static test procedure for pads 6.1.1 Principle A force is applied normal to the test pad and the displacement is measured. 6.1.2 Apparatus 6.1.2.1 Controlled temperature test area The area of the laboratory where the test is conducted, maintained at (23 5) C. Where pads are to be used at other ambient temperatures additional tests shall be performed, if