1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13167:2012Thermal insulation products for buildings Factory made cellular glass (CG) products SpecificationCopyright European Committee for Standardization Provided by IHS
2、under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13167:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13167:2012. It supersedes BS EN 13167:2008, which is withdrawn.The UK participation in its p
3、reparation was entrusted to T e c h n i c a l C o m m i t t e e B / 5 4 0 / 6 , F i b r o u s a n d i n o r g a n i c t h e r m a l insulation materials.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all
4、the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 69982 5 ICS 91.100.60 Compliance with a British Standard cannot confer immunityfrom legal obligations.This British
5、 Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networ
6、king permitted without license from IHS-,-,-BS EN 13167:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13167 November 2012 ICS 91.100.60 Supersedes EN 13167:2008English Version Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification Produits is
7、olants thermiques pour le btiment - Produits manufacturs en verre cellulaire (CG) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Schaumglas (CG) - Spezifikation This European Standard was approved by CEN on 6 October 2012. CEN members are bound to comply with the CEN/CENE
8、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre o
9、r to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the off
10、icial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands
11、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitatio
12、n in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13167:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13167:2012EN 13167:2012
13、 (E) 2 Contents Page Foreword 31 Scope 52 Normative references 53 Terms, definitions, symbols, units and abbreviated terms .74 Requirements 105 Test methods . 166 Designation code 197 Evaluation of conformity 208 Marking and labelling . 20Annex A (normative) Determination of the declared values of t
14、hermal resistance and thermal conductivity . 22Annex B (normative) Initial type testing (ITT) and factory production control (FPC) . 24Annex C (normative) CG multi-layered insulation products . 28Annex D (informative) Additional properties 30Annex E (informative) Preparation of the test specimens to
15、 measure thermal conductivity . 32Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 33Bibliography . 41Tables Table 1 Dimensional stability under specified conditions 12Table 2 Levels for compressive strength 13Table 3 Level
16、s for bending strength 14Table 4 Levels for deformation under point load . 14Table 5 Test methods, test specimens and conditions . 18Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 23Table B.1 Minimum number of tests for ITT and minimum product testing
17、frequencies 24Table B.2 Minimum product testing frequencies for the reaction to fire characteristics . 26Table D.1 Test methods, test specimens, conditions and minimum testing frequencies . 31Table ZA.1 Relevant clauses for Cellular glass and intended use . 34Table ZA.2 Systems of attestation of con
18、formity 35Table ZA.3.1 Assignment of evaluation of conformity tasks for products under system 1 for reaction to fire and system 3 for other characteristics 36Table ZA.3.2 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire
19、37Figures Figure ZA.1 Example CE marking information 40Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13167:2012EN 13167:2012 (E) 3 Foreword This document (EN 13167:2012)
20、has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, a
21、nd conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This d
22、ocument has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This documen
23、t supersedes EN 13167:2008. Compared with EN 13167:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editori
24、al and technical content and addition of information on some specific items, such as point load (move towards 4.3); compressive strength (additional levels); bending strength (additional levels); d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for r
25、eaction to fire testing Factory made products; e) changes to the Annex ZA. This standard is one of a series of standards for thermal insulation products used in buildings but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have pro
26、posed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation prod
27、ucts for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specif
28、ication Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13167:2012EN 13167:2012 (E) 4 EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane fo
29、am (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Fa
30、ctory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insul
31、ation products for buildings Factory made wood fibre (WF) products Specification The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/C
32、ENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,
33、 Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo repro
34、duction or networking permitted without license from IHS-,-,-BS EN 13167:2012EN 13167:2012 (E) 5 1 Scope This European Standard specifies the requirements for factory made cellular glass (CG) products, with or without facings or coatings, which are used for the thermal insulation of buildings. The p
35、roducts are manufactured in the form of boards or slabs. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and inclu
36、des procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found i
37、n regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,50 m2K/W or a declared thermal conductivity greater than 0,065 W/(mK) at 10 C are not covered by this standard. This standard does not cover in situ insulation products and products intended to be us
38、ed for the insulation of building equipment and industrial installations (covered by EN 14305). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited app
39、lies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN
40、824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826:1996, Thermal insulating products for building applications Determination of compression behaviour EN 1603, Thermal in
41、sulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 C/50 % relative humidity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity
42、conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications Determin
43、ation of tensile strength parallel to faces Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13167:2012EN 13167:2012 (E) 6 EN 1609, Thermal insulating products for building
44、applications Determination of short term water absorption by partial immersion EN 12086:1997, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications Determination of long term water a
45、bsorption by immersion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12090, Thermal insulating products for building applications Determination of shear behaviour EN 12430, Thermal insulating products for building applications Determination of
46、behaviour under point load EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products De
47、termination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172:2012, Thermal insulation products Evaluation of conformity EN 13501-1, Fire classification of construction products and building elements Part 1:
48、Classification using data from reaction to fire tests EN 13820, Thermal insulating materials for building applications Determination of organic content EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item EN 15715:2009, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products EN ISO 354, Acoustics Measurement o
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1