1、BSI Standards PublicationBS EN 13205-6:2014W o r k p l a c e e x p o s u r e Assessment of sampler performance for measurement of airborne particle concentrationsPart 6: Transport and handling testsBS EN 13205-6:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of
2、EN 13205-6:2014. Together with BS EN 13205-1, BS EN 13205-2, PD CEN/TR 13205-3, BS EN 13205-4:2014 and BS EN 13205-6:2014 it supersedes BS EN 13205:2002, which will be withdrawn upon publication of all parts of the series.The UK participation in its preparation was entrusted to Technical Committee E
3、H/2/2, Work place atmospheres.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institutio
4、n 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 78063 9ICS 13.040.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2014.Amendments/corrige
5、nda issued since publicationDate Text affectedBS EN 13205-6:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13205-6 June 2014 ICS 13.040.30 Supersedes EN 13205:2001English Version Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Pa
6、rt 6: Transport and handling tests Exposition sur les lieux de travail - valuation des performances des dispositifs de prlvement pour la mesure des concentrations de particules en suspension dans lair - Partie 6: Essais de manipulation et de transportExposition am Arbeitsplatz - Beurteilung der Leis
7、tungsfhigkeit von Sammlern fr die Messung der Konzentration luftgetragener Partikel - Teil 6: Prfungen zum Transport und zur Handhabung This European Standard was approved by CEN on 7 May 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions f
8、or giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in thr
9、ee official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bo
10、dies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
11、Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved world
12、wide for CEN national Members. Ref. No. EN 13205-6:2014 EBS EN 13205-6:2014EN 13205-6:2014 (E) 2 Contents Page Foreword 3 Introduction . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Symbols and abbreviations 5 4.1 Symbols 5 4.1.1 Latin 5 4.1.2 Greek . 6 4.2 Enumerating subscrip
13、ts 7 5 Transport test based on weighing samples before and after shipping by mail 7 5.1 Principle 7 5.2 Test procedure . 7 5.2.1 General 7 5.2.2 Test equipment 7 5.2.3 Test aerosol and method of loading collection media 8 5.2.4 Test method 8 5.3 Calculations 9 5.4 Test Report . 11 5.4.1 General 11 5
14、.4.2 Testing laboratory details and sponsoring organisation 11 5.4.3 Description of candidate sampler and collection substrate . 11 5.4.4 Description of test methods and materials . 11 5.4.5 Results 11 5.4.6 Summary . 12 6 Handling test for loaded samplers or collection substrates using a shaker 12
15、6.1 Principle 12 6.2 Test procedure . 12 6.2.1 General 12 6.2.2 Test equipment 12 6.2.3 Mounting of the samplers . 13 6.2.4 Test aerosol and method of loading collection media 13 6.2.5 Test method 13 6.3 Calculations 14 6.4 Test Report . 16 6.4.1 General 16 6.4.2 Testing laboratory details and spons
16、oring organisation 16 6.4.3 Description of candidate sampler and collection substrate . 16 6.4.4 Description of test methods and materials . 16 6.4.5 Results 16 6.4.6 Summary . 17 Bibliography 18 BS EN 13205-6:2014EN 13205-6:2014 (E) 3 Foreword This document (EN 13205-6:2014) has been prepared by Te
17、chnical Committee CEN/TC 137 “Assessment of workplace exposure to chemical and biological agents”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December
18、 2014 and conflicting national standards shall be withdrawn at the latest by December 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent ri
19、ghts. This document together with EN 13205-1, EN 13205-2, CEN/TR 13205-3, EN 13205-4 and EN 13205-5 supersedes EN 13205:2001. EN 13205, Workplace exposure Assessment of sampler performance for measurement of airborne particle concentrations, consists of the following parts: Part 1: General requireme
20、nts; Part 2: Laboratory performance test based on determination of sampling efficiency; Part 3: Analysis of sampling efficiency data Technical Report; Part 4: Laboratory performance test based on comparison of concentrations; Part 5: Aerosol sampler performance test and sampler comparison carried ou
21、t at workplaces; Part 6: Transport and handling tests (the present document). Significant technical changes from the previous edition, EN 13205:2001: This part of EN 13205 is partly based on Annex D of the previous edition, EN 13205:2001. The scope has been limited to aerosol samplers, and the curre
22、nt version of the standard is not (directly) applicable to other types of aerosol instruments. As this is now a standard in its own right, a clause on the used symbols has been added. Almost all definitions are now given either in EN 1540, Workplace exposure Terminology or in Part 1 of this standard
23、. The method of calculating the uncertainty of a sampler or a measuring procedure has been revised in order to comply with ENV 13005. The concept of “accuracy” is no longer used instead the concept of “expanded uncertainty” is used. The standard gives two methods to determine the dependence of the m
24、ass loss from collection substrates due to transport and/or handling, respectively. It is described how to use the test data to calculate the uncertainty due to transport/handling and how this is related to the requirements given in Part 1 of this European Standard. According to the CEN-CENELEC Inte
25、rnal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, I
26、reland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13205-6:2014EN 13205-6:2014 (E) 4 Introduction EN 481 defines sampling conventions for the particle size fractions
27、 to be collected from workplace atmospheres in order to assess their impact on human health. Conventions are defined for the inhalable, thoracic and respirable aerosol fractions. These conventions represent target specifications for aerosol samplers, giving the ideal sampling efficiency as a functio
28、n of particle aerodynamic diameter. In general, the sampling efficiency of real aerosol samplers will deviate from the target specification, and the aerosol mass collected will therefore differ from that which an ideal sampler would collect. In addition, the behaviour of real samplers is influenced
29、by many factors such as external wind speed. In many cases there is an interaction between the influence factors and fraction of the airborne particle size distribution of the environment in which the sampler is used. This part of EN 13205 describes two test methods for determining the uncertainties
30、 due to transport errors. The values calculated can directly be compared to the requirements of EN 13205-1:2014 The first method is based on loading collection substrates with particles from a workplace aerosol and delivery by ordinary mail. The second method is based on loading collection substrate
31、s with particles from a specified laboratory test aerosol and subsequent exposure of the collection substrates to vibrations using either a laboratory shaker table or a vertical shaker. EN 13205 (all parts) enables manufacturers and users of aerosol samplers to adopt a consistent approach to sampler
32、 validation, and provide a framework for the assessment of sampler performance with respect to EN 481 and EN 482. It is the responsibility of the manufacturer of aerosol samplers to inform the user of the sampler performance under the laboratory conditions1)specified in this part of EN 13205. It is
33、the responsibility of the user to ensure that the actual conditions of intended use are within what the manufacturers specifies as acceptable conditions according to the performance test. 1) The inhalable convention is undefined for particle sizes in excess of 100 m or for wind speeds greater than 4
34、 m/s. The tests required to assess performance are therefore limited to these conditions. Should such large particle sizes or wind speeds actually exist at the time of sampling, it is possible that different samplers meeting this standard give different results. BS EN 13205-6:2014EN 13205-6:2014 (E)
35、 5 1 Scope This European Standard specifies a performance test of loaded collection substrates for samplers for the inhalable, thoracic or respirable aerosol fractions and, as alternative, a handling test, both for testing transport losses of aerosol sampler substrates under prescribed conditions in
36、 order to calculate the expanded uncertainty of a measuring procedure according to EN 13205-1:2014, Annex A. The transport test involves shipping loaded substrates with ordinary mail, whereas the handling test uses a shaker. This part of EN 13205 applies to all samplers used for the health-related s
37、ampling of particles in workplace air. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the r
38、eferenced document (including any amendments) applies. EN 143, Respiratory protective devices - Particle filters - Requirements, testing, marking EN 1540, Workplace exposure - Terminology EN 13205-1:2014, Workplace exposure Assessment of sampler performance for measurement of airborne particle conce
39、ntrations Part 1: General requirements EN 13205-2:2014, Workplace exposure Assessment of sampler performance for measurement of airborne particle concentrations Part 2: Laboratory performance test based on determination of sampling efficiency ISO 15767, Workplace atmospheres Controlling and characte
40、rizing uncertainty in weighing collected aerosols 3 Terms and definitions For the purpose of this document, the terms and definitions given in EN 1540, EN 13205-1:2014 and EN 13205-2:2014 apply. NOTE With regard to EN 1540, in particular, the following terms are used in this document: respirable fra
41、ction, sampling efficiency, personal sampler, static sampler, thoracic fraction, inhalable fraction, measuring procedure, non-random uncertainty, random uncertainty, uncertainty (of measurement), precision and analysis. 4 Symbols and abbreviations 4.1 Symbols 4.1.1 Latin COELrelevant occupational ex
42、posure limit (OEL) value, mg/m3 m0,1, m0,5andm2nominal masses to be loaded onto collection substrates for selected sampling time t and nominal flow rate Q0at concentrations corresponding to 10 %, 50 % and 200 % of the occupational exposure limit, mg mHandlbnmass remaining on collection substrate n o
43、f subset b after the handling test, mg BS EN 13205-6:2014EN 13205-6:2014 (E) 6 Clause 6 mLoadbnmass loaded onto collection substrate n of subset b, mg mTranspbnmass remaining on collection substrate n of subset b after the transport test, mg Clause 5 NMLbnumber of mass loaded collection substrates i
44、n subset b Q0nominal flow rate of sampler, l/min sHandlstandard deviation of handling losses of loaded collection substrates, mg Clause 6 sHandlbstandard deviation of handling losses of loaded collection substrates for subset b, mg Clause 6 sTranspstandard deviation of transport losses of loaded col
45、lection substrates, mg Clause 5 sTranspbstandard deviation of transport losses of loaded collection substrates for subset b, mg Clause 5 t selected sampling time in the range from the minimum to the maximum sampling time according to the measurement procedure, min t0,1, t0,5and t2estimated sampling
46、times for obtaining nominal mass loadings of collection substrates, m0,1, m0,5andm2, respectively, with nominal flow rate Q0at actual workplace concentration, min txminimum sampling period at the concentration equal to COELmg/m3, min ut-nRnon-random measurement error due to transport/handling losses
47、, - ut-Rrandom measurement error due to transport/handling losses, - 4.1.2 Greek mHandlbnmass loss due to the handling test for collection substrate n of subset b, mg Clause 6 mTranspbnmass loss due to the transport test for collection substrate n of subset b, mg Clause 5 avermHandlbaverage relative
48、 handling losses of loaded collection substrates for subset b, mg Clause 6 avermTranspbaverage transport losses of loaded collection substrates for subset b, mg Clause 5 requirement for the transport loss (see 5.1) at the concentration equal to COELmg/m3, - proportionality constant that takes the va
49、lues 0,1, 0,5 and 2,0, respectively, for the concentrations corresponding to 10 %, 50 % and 200 %, respectively, of COEL, - nratio of the calculated concentration from mass load n and the limit value, - BS EN 13205-6:2014EN 13205-6:2014 (E) 7 4.2 Enumerating subscripts b for subset of collection substrate mass loads n for collection substrate mass load 5 Transport test based on weighing samples before and after shipping by mail 5.1 Principle The transport test i
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1