BS EN 13321-1-2012 Open data communication in building automation controls and building management Home and building electronic system Product and system requirements《建筑自动化 控制和建筑管理.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13321-1:2012Open data communication inbuilding automation, controlsand building management Home and building electronicsystemPart 1: Product and system requirementsBS EN 13

2、321-1:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13321-1:2012.It supersedes BS EN 13321-1:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee RHE/16, Performance requirements for control systems.A list of

3、 organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited

4、2012ISBN 978 0 580 77056 2ICS 35.240.99; 97.120Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affecte

5、dBS EN 13321-1:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13321-1 October 2012 ICS 35.240.99; 97.120 Supersedes EN 13321-1:2006English Version Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and sy

6、stem requirements Rseau ouvert de communication de donnes pour lautomatisation, la rgulation et la gestion technique du btiment - Systmes lectroniques pour la maison et le btiment - Partie 1: Spcification des produits et des systmes Offene Datenkommunikation fr die Gebudeautomation und Gebudemanagem

7、ent - Elektrische Systemtechnik fr Heim und Gebude - Teil 1: Produkt- und Systemanforderungen This European Standard was approved by CEN on 17 August 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s

8、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,

9、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cr

10、oatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

11、 United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13321-1

12、:2012: EBS EN 13321-1:2012EN 13321-1:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Requirements .6Annex A (informative) General safety requirements and environmental conditions .7Annex B (normative) Maintenance procedure applicable to this European Standard 8An

13、nex C (normative) List of referenced CENELEC/TC 205 European Standards 9Annex D (informative) Other related (but not referenced) CENELEC/TC 205 HBES European Standards 11BS EN 13321-1:2012EN 13321-1:2012 (E) 3 Foreword This document (EN 13321-1:2012) has been prepared by Technical Committee CEN/TC 2

14、47 “Building Automation, Controls and Building Management”, the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2013, and conflicting national standards

15、shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13321-1:20

16、06. Compared to the previous version (EN 133211:2006), the following changes have been made: a) Clause 2 “Normative references“ has been added; b) references to the EN 50090 series have been updated; c) the new EN 50491 series has been added to the references; d) EN 50090-6 has been deleted from Cla

17、use 3 “Requirements“; e) the references to EN 50090 series and EN 50491 series in Annex A and Annex C have been updated; f) reference to EN 50090-1 was deleted in Annex D, it is now included in Annex C. CEN/TC 247, “Building Automation, Controls and Building Management“, in collaboration with CENELE

18、C/TC 205 “Home and Building Electronic Systems (HBES)“ and its co-operation partner KNX Association, has prepared this document to reference the relevant parts of EN 50090 series. Furthermore, it is also a CEN/TC 247 specification and intended to extend their area of application to Building, Automat

19、ion and Control Systems (BACS). The patent rights concern mainly series EN 50090. Each part of EN 50090 concerned has patent right information in its Foreword, and for each part concerned, CCMC has received patent right declarations by KNX Association. EN 13321, Open data communication in building a

20、utomation, controls and building management Home and building electronic system consists of the following parts: Part 1: Product and system requirements (the present document); Part 2: KNXnet/IP communication. According to the CEN/CENELEC Internal Regulations, the national standards organisations of

21、 the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth

22、erlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13321-1:2012EN 13321-1:2012 (E) 4 Introduction The permanent objective of CENELEC/TC 205 is to prepare standards for all aspects of Home and Building Electronic Systems (H

23、BES) in relation to the Information Society. Such HBES standards ensure the integration of a wide spectrum of control applications and the control and management aspects of other applications in and around homes and buildings, including the gateways to different transmission media and public network

24、s. Moreover, they take all matters of EMC and electrical and functional safety into account. Hence, they are the pre-condition that conforming products interwork and are installer friendly to facilitate the system designers and installers task of providing the necessary networks according to their c

25、ostumers service needs. Extending these standardised Home and Building Electronic Systems (HBES) requirements to Building Automation and Control System Application and Building Management (BACS) generates important synergies in functionality and further enhances the economy of scale in this growing,

26、 open multivendor market of interoperable BACS products. This European Standard is intended for use by all involved in design, manufacture, engineering, installation and commissioning activities. Moreover, and in line with the EUs co-regulatory view of European standardization, this European Standar

27、d supports the European objectives and helps users comply with important EU Directives such as the Construction Products Directive and the Energy Performance of Buildings Directive. BS EN 13321-1:2012EN 13321-1:2012 (E) 5 1 Scope This European Standard specifies, as for Home or Building Electronic S

28、ystems (HBES) for the domain of Building Automation and Control System Application and Building Management (BACS), common rules for a class of multi-application bus systems where the functions are decentralised and linked through a common communication process. This European Standard sets the basic

29、requirements for products and systems. The requirements may also apply to the distributed functions of any equipment connected in a home or building control system if no specific standard exists for this equipment or system. Due to its reference to the EN 50090 series, this European Standard sets re

30、quirements for the BACS area in relation to Architecture and Hardware and Application and Communication of systems based on HBES amongst other areas, and specifies the basic requirements for interoperability (between products and systems). Aspects such as environmental conditions/external influences

31、, electrical safety, EMC, etc. also used to be covered by EN 50090-2-2, which will be superseded by the now available EN 50491 series. The latter European Standards series was jointly developed by CENELEC/TC 205 and CEN/TC 247 and will in the future also include aspects like functional safety in nor

32、mal use (now contained in the EN 50090-2-3). The EN 50491 series applies, together with the relevant product standard for devices, if applicable. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application

33、. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50090-1, Home and Building Electronic Systems (HBES) Part 1 Standardization structure EN 50090-2-2, Home and Building Electronic System

34、s (HBES) Part 2-2: System overview General technical requirements EN 50090-2-3, Home and Building Electronic Systems (HBES) Part 2-3: System overview General functional safety requirements for products intended to be integrated in HBES EN 50090-3-1, Home and Building Electronic Systems (HBES) Part 3

35、-1: Aspects of application Introduction to the application structure EN 50090-3-2, Home and Building Electronic Systems (HBES) Part 3-2: Aspects of application User process for HBES Class 1 EN 50090-3-3, Home and Building Electronic Systems (HBES) Part 3-3: Aspects of application HBES Interworking m

36、odel and common HBES data types EN 50090-4-1, Home and Building Electronic Systems (HBES) Part 4-1: Media independent layers Application layer for HBES Class 1 EN 50090-4-2, Home and Building Electronic Systems (HBES) Part 4-2: Media independent layers Transport layer, network layer and general part

37、s of data link layer for HBES Class 1 EN 50090-4-3, Home and Building Electronic Systems (HBES) Part 4-3: Media independent layers Communication over IP EN 50090-5-1, Home and Building Electronic Systems (HBES) Part 5-1: Media and media dependent layers Power line for HBES Class 1 BS EN 13321-1:2012

38、EN 13321-1:2012 (E) 6 EN 50090-5-2, Home and Building Electronic Systems (HBES) Part 5-2: Media and media dependent layers Network based on HBES Class 1, Twisted Pair EN 50090-5-3, Home and Building Electronic Systems (HBES) Part 5-3: Media and media dependent layers Radio frequency EN 50090-7-1, Ho

39、me and Building Electronic Systems (HBES) Part 7-1: System management Management procedures 3 Requirements Building Automation and Control Systems (BACS) applications according to this European Standard shall use the requirements stated in the European Standard series EN 50090. The following parts o

40、f EN 50090 shall be used: Part 1: Standard structure Part 2: System overview Part 3: Aspects of application Part 4: Media independent layers Part 5: Media and media dependent layers Part 7: System management All applicable parts of EN 50090 series are listed together with their exact references in A

41、nnex C. BS EN 13321-1:2012EN 13321-1:2012 (E) 7 Annex A (informative) General safety requirements and environmental conditions As the part EN 50090-2-2, General technical requirements, is listed under the Low Voltage Directive and the EMC Directive, it is necessarily a part of EN 13321-1 for the tim

42、e being. A review of these requirements has been jointly worked out by CEN/TC 247 and CENELEC/TC 205, and published in the EN 50491 series. These will supersede the EN 50090-2-2. The same goes for EN 50090-2-3, which will become a part of the EN 50491 series. As soon as the applicability of the EN 5

43、0090-2-2 or EN 50090-2-3 expires, the list of parts will be amended via the Maintenance procedure applicable to this European Standard provided by Annex B. BS EN 13321-1:2012EN 13321-1:2012 (E) 8 Annex B (normative) Maintenance procedure applicable to this European Standard Considering that CENELEC

44、continues to further develop the EN 50090 series and/or related EN standards, e.g. the one to result from the process mentioned in Annex A above, and these standards are already submitted to the Public Enquiry and Approval process within the same set of member countries, it would be a waste of time

45、and resources for any amendment to the list in Annex C to result in running through the process a second time. Furthermore, any necessary updating of the current standard by CENELEC can be likened to the EN ISO 16484-5 (and EN ISO 164846) case where the processing of amendments already dealt with an

46、d approved in the originating organisation ASHRAE under an internationally open procedure was agreed to be submitted to the established CEN (and ISO) rules of the Maintenance Agency (cf. CEN BT RESOLUTION BT 146/1994). Any necessary updating in view of new CENELEC results shall be handled according

47、to the same set of rules, with CENELEC, being recognised as the Maintenance agency for this CEN/TC 247 European Standard. BS EN 13321-1:2012EN 13321-1:2012 (E) 9 Annex C (normative) List of referenced CENELEC/TC 205 European Standards EN 50090-1, Home and Building Electronic Systems (HBES) Part 1 St

48、andardization structure EN 50090-2-1, Home and Building Electronic Systems (HBES) Part 2-1: System overview Architecture EN 50090-2-2, Home and Building Electronic Systems (HBES) Part 2-2: System overview General technical requirements EN 50090-2-3, Home and Building Electronic Systems (HBES) Part 2

49、-3: System overview General functional safety requirements for products intended to be integrated in HBES EN 50090-3-1, Home and Building Electronic Systems (HBES) Part 3-1: Aspects of application Introduction to the application structure EN 50090-3-2, Home and Building Electronic Systems (HBES) Part 3-2: Aspects of application User process for HBES Class 1 EN 50090-3-3, Home and Building Electronic Systems (HBES) Part 3-3: Aspects of application H