BS EN 13395-3-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Test for flow of repair concrete《混凝土结构的.pdf

1、BRITISH STANDARD BS EN 13395-3:2002 Products and systems for the protection and repair of concrete structures Test methods Determination of workability Part 3: Test for flow of repair concrete The European Standard EN 13395-3:2002 has the status of a British Standard ICS 91.080.40; 91.100.30 BS EN 1

2、3395-3:2002 This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 31 July 2002 BSI 31 July 2002 ISBN 0 580 40127 8 National forewo

3、rd This British Standard is the official English language version of EN 13395-3:2002. The UK participation in its preparation was entrusted by Technical Committee B/517, Concrete, to Subcommittee B/517/8, Protection and repair of concrete structures, which has the responsibility to: A list of organi

4、zations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Corre

5、spondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for their correct application. Compliance with a British Standard does no

6、t of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developme

7、nts and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd.

8、No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13395-3 May 2002 ICS 91.080.40; 91.100.30 English version Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete Produits

9、et systmes de protection et de rparation des structures en bton - Mthodes dessai - Dtermination de louvrabilit - Partie 3: Essai dcoulement du bton Produkte und Systeme fr den Schutz und die Instandsetzung von Betontragwerken - Prfverfahren - Bestimmung der Verarbeitbarkeit - Teil 3: Prfung des Flie

10、verhaltens von Instandsetzungsbeton This European Standard was approved by CEN on 4 January 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to

11、-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th

12、e responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg

13、, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CEN All rights of exploitation in any form and by an

14、y means reserved worldwide for CEN national Members. Ref. No. EN 13395-3:2002 EEN 13395-3:2002 (E) 2 Contents page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions4 4 Principle4 5 Equipment 5 6 Test procedure.5 7 Test report 5EN 13395-3:2002 (E) 3 Foreword This document EN 13395-

15、3:2002 has been prepared by Technical Committee CEN/TC 104 “Concrete and related products“, the secretariat of which is held by DIN. This document has been prepared by CEN/TC 104/SC8, “Product and systems for the protection and repair of concrete structures“, the secretariat of which is held by AFNO

16、R. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest by December 2002. This European Standard is one of a series de

17、aling with products and systems for the protection and repair of concrete structures. It describes a method for determining the workability of free-flowing repair concrete mixes. It is one of a series of inter-related parts dealing with the workability of repair grouts, mortars and concretes. The ot

18、her parts are: EN 13395-1, Products and systems for the protection and repair of concrete structures Test methods Determination of workability Part 1: Test for flow of thixotropic mortars ; EN 13395-2, Products and systems for the protection and repair of concrete structures Test methods Determinati

19、on of workability Part 2: Test for flow of grout or mortar ; EN 13395-4, Products and systems for the protection and repair of concrete structures Test methods Determination of workability Part 4: Application of repair mortar overhead. According to the CEN/CENELEC Internal Regulations, the national

20、standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

21、EN 13395-3:2002 (E) 4 1 Scope This European Standard specifies a method for determining the workability of high flow hydraulic cement, PCC and PC based concrete products for the protection and repair of concrete, as defined in EN 1504-3, whose workability is outside the normal range for concrete as

22、defined in ENV 206. Tests for the workability of repair products and systems based on thixotropic mortar and high flow grout or mortar are contained in prEN 13395-1 and prEN 133952 respectively. Normal workability concrete mixes, which can include proprietary formulations, are applied and compacted

23、in accordance with conventional practice. The workability of these products should be assessed using the slump, VeBe or other appropriate method given in EN 206-1. The workability of conventional high flow concrete mixes should be assessed by the method of EN 12350-5. 2 Normative references This Eur

24、opean Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publicatio

25、ns apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 196-1, Methods of testing cement Part 1: Determination of strength. EN 206-1, Concrete Part 1: Specifi

26、cation, performance, production and conformity. EN 1504-1, Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 1: Definitions. EN 12350-5, Testing fresh concrete Part 5: Flow test table. prEN 1504-3 1

27、, Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 3: Structural and non-structural repair. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN

28、1504-1 and the following apply. 3.1 flow time the time taken for a fixed volume of concrete to flow 750 mm along a trough 4 Principle The principle of this test is to provide a relevant method to evaluate the workability of high flow repair concrete in the laboratory, which reflects the actual worka

29、bility requirements for site concrete repair works. The test measures the time taken for a fixed volume of the concrete to flow 750 mm along a defined horizontal trough. NOTE 1 High flow repair concretes are specially formulated mixes with a maximum aggregate size of 10 mm that are unsuitable for te

30、sting by normal workability tests (i.e. EN 206-1 or EN 12358). NOTE 2 The method of test is sufficiently robust as to be suitable for use as a quality control technique in site laboratories.1Under preparation.EN 13395-3:2002 (E) 5 5 Equipment 5.1 Concrete mixer as specified in EN 206-1. 5.2 Flow tro

31、ugh and funnel fabricated in accordance with Figure 1. 5.3 Six Litre Measuring jug capable of taking the required volume of concrete. 5.4 Standard laboratory climate of (21 2) C and (60 10) % RH. 5.5 Climatic chamber for mixing and testing of the concrete at (5 2) C. 6 Test procedure All the concret

32、ing materials, including the mix water and the test equipment (5.2 and 5.3) shall be conditioned in either the standard laboratory climate (5.4) or the climatic chamber (5.5) for a period of not less than 24 h prior to mixing. Assemble the funnel support and funnel and locate onto the trough, ensuri

33、ng that the edge of the funnel support is aligned with the edge of the trough. Ensure that the test equipment is rigidly supported such that the trough is horizontal and free from vibration. Unless otherwise instructed by the manufacturer, mix the concrete in accordance with EN 206-1 at the required

34、 temperature. Carry out the testing of the concrete immediately after completion of mixing and then again (30 1) min after mixing. Gently re-agitate the concrete every five minutes between the two tests. Immediately before carrying out the test, flood the surfaces of the funnel and trough with water

35、 and drain-off excess water by inverting the test equipment for one minute. Fit the bung and charge the funnel with six litres of concrete. Pull the bung upwards to release the concrete and record the time taken for the concrete to flow a distance of 750 mm along the trough (the “flow time”) and the

36、 maximum distance flowed. Record any evidence of bleeding or segregation that occurs in the concrete. Carry out three repeat tests at both temperatures (5.4 and 5.5) and at both times after mixing, resulting in a total of twelve tests. 7 Test report a) a reference to the test method standard; b) nam

37、e and address of the test laboratory; c) identification number and date of the test; d) name and address of the manufacturer or supplier of the product; e) name and identification marks or batch number of the product, and the maximum aggregate size; f) date of supply of the product; g) date of prepa

38、ration of the test specimens and any deviation from the prescribed method of preparation; h) conditions of storage of prepared specimens prior to test;EN 13395-3:2002 (E) 6 i) date of test and details of the test equipment used, including the make, type and capacity and the calibration details or th

39、e identification number of the apparatus; j) the test results, including the period of delay between completion of mixing and testing, any evidence of segregation and bleeding and the time taken for the concrete to flow 750 mm along the trough (the “flow time”) and the maximum distance travelled for

40、 each mix and each temperature; k) precision data; l) date of test report and signature. Dimensions in millimetres a) Funnel and support b) Enlarged view of funnel support, showing dimensions c) Side elevation of flow troughEN 13395-3:2002 (E) 7 d) Section through trough NOTE 1 Through and funnel ma

41、de of 2 mm galvanised steel. NOTE 2 Funnel support fits flush with end of the trough (align A-A). NOTE 3 Ends of trough welded/riveted to make a grout-tight seal. NOTE 4 Funnel to be provided with a suitable non-absorbent bung. NOTE 5 Funnel and support to be demountable for ease of cleaning. NOTE 6

42、 Tolerance to 0,5 mm. Figure 1 Concrete flow trough apparatusBS EN 13395-3:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the inter

43、national level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. W

44、e would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members a

45、n individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89

46、96 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on sta

47、ndards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Informati

48、on Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration.

49、Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, i