BS EN 13451-4-2014 Swimming pool equipment Additional specific safety requirements and test methods for starting platforms《游泳池设备 跳台专门安全要求和试验方法》.pdf

1、BSI Standards PublicationBS EN 13451-4:2014Swimming pool equipmentPart 4: Additional specific safetyrequirements and test methods for startingplatformsBS EN 13451-4:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13451-4:2014.It supersedes BS EN 13451-4:200

2、1 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necess

3、aryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 82680 1ICS 97.220.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was pu

4、blished under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments issued since publicationDate Text affectedBS EN 13451-4:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13451-4 October 2014 ICS 97.220.10 Supersedes EN 13451-4:2001English Version Swimmi

5、ng pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms Equipement de piscine - Partie 4: Exigences de scurit et mthodes dessai complmentaires spcifiques aux plots dpart Schwimmbadgerte - Teil 4: Zustzliche besondere sicherheitstechnische Anforderu

6、ngen und Prfverfahren fr Startblcke This European Standard was approved by CEN on 30 August 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to

7、-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translat

8、ion under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,

9、Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION CO

10、MIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13451-4:2014 EBS EN 13451-4:2014EN 13451-4:2014 (E) 2

11、 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Safety requirements 4 4.1 Design and manufacture .4 4.2 Structural integrity .6 4.3 Slip resistance 7 5 Test methods 7 6 Manufacturers instructions .7 Bibliography 8 BS EN 13451-4:2014EN 13451-4:2014 (E) 3 Fore

12、word This document (EN 13451-4:2014) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an

13、 identical text or by endorsement, at the latest by April 2015 and conflicting national standards shall be withdrawn at the latest by April 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held

14、 responsible for identifying any or all such patent rights. This document supersedes EN 13451-4:2001. This European Standard EN 13451 “Swimming pool equipment” consists of Part 1: General safety requirements and test methods Part 2: Additional specific safety requirements and test methods for ladder

15、s, stepladders and handle bends Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features Part 4: Additional specific safety requirements and test methods for starting platforms Part 5: Additional specific safety requirements a

16、nd test methods for lane lines Part 6: Additional specific safety requirements and test methods for turning boards Part 7: Additional specific safety requirements and test methods for water polo goals Part 10: Additional specific safety requirements and test methods for diving platforms, diving spri

17、ngboards and associated equipment Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads In relation to EN 13451-4:2001 the following main amendments have been made: a) the scope has been updated by referring to EN 15288-1 and EN 15288-2; b)

18、 requirements for an adjustable setting back plate have been added (see Figure 1); c) advice for handgrips forward start has been added; d) Clause 6 “Manufacturers instructions“ has been added; e) Annex A has been deleted. According to the CEN-CENELEC Internal Regulations, the national standards org

19、anizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg

20、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13451-4:2014EN 13451-4:2014 (E) 4 1 Scope This European Standard specifies safety requirements for starting platforms in addition to the general safety requir

21、ements of EN 13451-1:2011 and should be read in conjunction with it. The requirements of this specific standard take priority over those in EN 13451-1:2011. This European Standard is applicable to manufactured starting platforms for use in competition and training in classified swimming pools as spe

22、cified in EN 15288-1 and EN 15288-2. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the ref

23、erenced document (including any amendments) applies. EN 13451-1:2011, Swimming pool equipment - Part 1: General safety requirements and test methods EN 15288-1, Swimming pools - Part 1: Safety requirements for design EN 15288-2, Swimming pools - Part 2: Safety requirements for operation 3 Terms and

24、definitions For the purposes of this document, the terms and definitions given in EN 13451-1:2011 and the following apply. 3.1 starting platform raised platform, located on the pool edge, for elevated entry into the water form a stationary start in a racing dive 4 Safety requirements 4.1 Design and

25、manufacture 4.1.1 Dimensions The dimensions indicated in the Figures 1 and 2 shall be complied with. The design of the equipment does not need to comply with the examples given. If the height of the starting platform t1is 500 mm, a step shall be provided at a height 400 mm. BS EN 13451-4:2014EN 1345

26、1-4:2014 (E) 5 Dimensions in millimetres Key 1 top platform 2 adjustable setting back plate 3 backstroke swimmer handgrips 4 forward swimmer handgrips (if needed, see 4.1.3) 5 water level Figure 1 Starting platform NOTE Dimensional requirements for competitive use, stipulated by the governing body F

27、INA (Fdration Internationale de Natation Amateur), are given in 1. 4.1.2 Top platform The dimension of the top platform shall be 500 mm 500 mm. The top platform shall be constructed so as to permit grasping at the front for a length 400 mm and at both sides for a length 100 mm (see Figure 2). In the

28、 zones designed to be grasped, the dimension between the top of the platform and the top of the recess shall be between 30 mm and 40 mm. The top platform shall be horizontal or have a maximum slope of 10 in the direction of start. BS EN 13451-4:2014EN 13451-4:2014 (E) 6 The front edge shall be insta

29、lled in the same plane as the pool wall. 4.1.3 Handgrips Handgrips for backstroke starts shall be placed within 300 mm to 600 mm above the water surface both horizontally and vertically, in the same plane as the pool wall. Cross section can be round, oval, a rounded rectangular or elliptical; the di

30、mension shall be between 25 mm and 40 mm. Dimensions in millimetres Key 1 direction of start Figure 2 Grasping zones Handgrips for the forward start may be installed on the sides of the starting platforms. 4.2 Structural integrity The starting platform shall be firm and give no springing effect. Sta

31、rting platforms shall be designed to withstand: a) a vertical load as stated in EN 13451-1:2011, Annex A; b) a horizontal load, applied at 90 on the front edge of the platform in the opposite direction of start, equivalent to 100 % of the vertical load stated in EN 13451-1:2011, Annex A. c) a horizo

32、ntal load, applied at 90 on the upper part of backstroke handgrips in direction of starting equivalent to 100 % of the vertical load stated in EN 13451-1:2011, Annex A. Backstroke handgrips shall be designed to withstand a horizontal pulling force in direction of starting equivalent to the load spec

33、ified in b), applied in the position of maximum leverage. BS EN 13451-4:2014EN 13451-4:2014 (E) 7 Removable starting platforms shall be fitted with devices for securing them. The fixing method and its fixing devices shall comply with the requirements of the manufacturer/supplier and shall be tamper

34、proof. 4.3 Slip resistance The surface of the top platform and of the intermediate step shall comply with the requirements of rating group 24 according to EN 13451-1:2011, Table 1. The slip resistant surface on the top platform shall extend over the front edge of the platform itself, where the users

35、 toes grasp. 5 Test methods The requirements of Clause 4 shall be verified by the most appropriate method: measurement; visual examination; or practical tests. 6 Manufacturers instructions The manufacturer shall at least provide the following information: a) warning that the starting platform shall

36、only be used by people trained in its safe use (e. g. warning sign); b) warning, that diving can cause serious injury. Racing dive from a starting platform should only be carried out under supervision or by people trained in its safe use. The FINA regulation 1 requires a minimum water depth of 1,35

37、m for a distance of 1,0 m to 6,0 m from starting wall. For competitive swimming and training the guidance and regulations of the national governing bodies of swimming should be followed at all times. BS EN 13451-4:2014EN 13451-4:2014 (E) 8 Bibliography 1 FINA Facilities Rules 2009-2013, enforced fro

38、m September 24, 2009, FR 2.7 Starting platforms and FR 2.8 Numbering This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and ot

39、her standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expert

40、ise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standa

41、rdsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including Britis

42、h and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of su

43、bscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7

44、 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to B

45、SI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards pub

46、lications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revi

47、sion. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standa

48、rds and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted

49、 under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (order