1、BS EN 13523-29:2017Coil coated metals TestmethodsPart 29: Resistance to environmental soiling(Dirt pick-up and striping)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13523-29:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation
2、 of EN 13523-29:2017.It supersedes BS EN 13523-29:2010 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee STI/21, Paint systems and surface preparation for metallicsubstrates.A list of organizations represented on this committee can beobtained on request t
3、o its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 91554 3ICS 25.220.60Compliance with a British Standa
4、rd cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate Text affectedBS EN 13523-29:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM
5、EN 13523-29 March 2017 ICS 25.220.60 Supersedes EN 13523-29:2010English Version Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) Tles prlaques - Mthodes dessai - Partie 29 : Rsistance la pollution environnementale (salissures)Bandbeschichte
6、te Metalle - Prfverfahren - Teil 29: Bestndigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung) This European Standard was approved by CEN on 30 December 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea
7、n Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (
8、English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgi
9、um, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
10、 Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN n
11、ational Members. Ref. No. EN 13523-29:2017 EBS EN 13523-29:2017EN 13523-29:2017 (E) 2 Contents Page European foreword . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Principle . 5 5 Apparatus and materials 5 6 Sample preparation 6 7 Procedure. 6 8 Evaluation 7 9 Test report . 8
12、Bibliography 9 BS EN 13523-29:2017EN 13523-29:2017 (E) 3 European foreword This document (EN 13523-29:2017) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, ei
13、ther by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CE
14、N shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13523-29:2010. The main changes are: a) the washing procedure was corrected; b) the procedure in Clause 7 has been clarified; c) the text has been revised editorially and the normative referenc
15、es have been updated. The EN 13523 series, Coil coated metals Test methods, consists of the following parts: Part 0: General introduction Part 1: Film thickness Part 2: Gloss Part 3: Colour difference Instrumental comparison Part 4: Pencil hardness Part 5: Resistance to rapid deformation (impact tes
16、t) Part 6: Adhesion after indentation (cupping test) Part 7: Resistance to cracking on bending (T-bend test) Part 8: Resistance to salt spray (fog) Part 9: Resistance to water immersion Part 10: Resistance to fluorescent UV radiation and water condensation Part 11: Resistance to solvents (rubbing te
17、st) Part 12: Resistance to scratching Part 13: Resistance to accelerated ageing by the use of heat Part 14: Chalking (Helmen method) BS EN 13523-29:2017EN 13523-29:2017 (E) 4 Part 15: Metamerism Part 16: Resistance to abrasion Part 17: Adhesion of strippable films Part 18: Resistance to staining Par
18、t 19: Panel design and method of atmospheric exposure testing Part 20: Foam adhesion Part 21: Evaluation of outdoor exposed panels Part 22: Colour difference Visual comparison Part 23: Resistance to humid atmospheres containing sulfur dioxide Part 24: Resistance to blocking and pressure marking Part
19、 25: Resistance to humidity Part 26: Resistance to condensation of water Part 27: Resistance to humid poultice (Cataplasm test) Part 29: Resistance to environmental soiling (Dirt pick-up and striping) According to the CEN-CENELEC Internal Regulations, the national standards organisations of the foll
20、owing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
21、Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13523-29:2017EN 13523-29:2017 (E) 5 1 Scope This part of the EN 13523 series specifies a procedure for the comparative evaluation of resistance to soiling of an organic coa
22、ting on a metallic substrate (coil coating) in an outdoor exposure environment, particularly the soiling defect known as “Tiger stripes”. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For da
23、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13523-0, Coil coated metals - Test methods - Part 0: General introduction EN 13523-19:2011, Coil coated metals - Test methods - Part 19: Panel
24、design and method of atmospheric exposure testing 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13523-0 apply. 4 Principle A test panel is exposed along with known reference panels, to the effects of atmospheric dirt and rain. The dirt and rain is c
25、ollected and directed onto the surface of the panels in such a way as to channel rainwater thus creating the conditions to form stripes on the surface under test. 5 Apparatus and materials 5.1 Exposure rack design in accordance with EN 13523-19:2011, Clause 4 and Figure 4, modified as described belo
26、w. The area of the rack normally used for the exposure of panels to the 5 orientation is used to install a sheet made of UV stable polymeric material (e.g. polycarbonate). This sheet forms the collector of the atmospheric soil and is angled on the upper surface of the rack at between 10 and 12 with
27、respect to the horizontal plane to control the rate of run-off of rainwater. The machining imparts grooves of 3 mm width and 3 mm depth at a separation of 3 mm extending along the surface and over the rounded edge to direct rainwater onto the panels in rivulets (see Figures 1 and 2). The upper row o
28、f the 90 North facing exposure area of the rack is used to fix the panels, having removed the existing overhang. Two rows are used for this exposure if the panels are longer than 200 mm. The test panels are positioned so that the top edge is in uniform contact with the bottom edge of the collector o
29、verhang. BS EN 13523-29:2017EN 13523-29:2017 (E) 6 Figure 1 Detail of grooves to be machined Top view Figure 2 Detail of grooves to be machined Side view 6 Sample preparation The test samples shall be flat and free from contamination. Sampling shall be performed in accordance with EN 13523-0. Sample
30、 dimensions shall be 100 mm (200 mm to 400 mm). If coil production line samples are used these should be cut so as to have the longest dimension in the direction of rolling. 7 Procedure In addition to the test panel, expose two reference panels for each test campaign: one of known good and one of kn
31、own poor performance. This allows for comparative evaluation in various atmospheric conditions. The duration of the test is typically three months and shall be no longer than six months. The duration of the test shall be for a continuous period to avoid other weathering effects, e.g. corrosion, phot
32、o degradation, etc. To minimize seasonal effects, the start date should be noted. At the end of the test period there shall be sufficient separation in performance between the reference panels so as to allow a ranking of the test panels. If not, the test will be restarted with new panels. BS EN 1352
33、3-29:2017EN 13523-29:2017 (E) 7 8 Evaluation Evaluate all panels as soon as possible after the exposure; intermediate examinations may be made (visual observations of the panels on the exposure rack). During handling of the panels and storage before examination, care shall be taken not to disturb th
34、e dirt on the surface. Then the test panels are compared to the reference panels and classified relative to each other and to reference panels and ranked accordingly, e.g.: better than the best reference panel; same as the best reference panel; in between of both reference panels; same as the worst
35、reference panel; worse than the worst reference panel. Changes in gloss and colour measured in accordance with EN 13523-2 and EN 13523-3 can be used to make the comparison. Record gloss and colour at points A, B and C (triplicate readings), as indicated in Figure 3. The results should be documented
36、by photographing the panels. To evaluate the ease with which the panels can be cleaned, they may then be subjected to a washing procedure: Wash the left half of the panel indicated in Figure 3 with water containing 0,5 % by mass of a mild non-reactive detergent (pH 6 to pH 7) at ambient temperature.
37、 Use a cloth or sponge that is non-abrasive and smooth to gently clean the surface. Rinse with water at ambient temperature and air dry at ambient temperature. A first evaluation is made by comparing the washed area of each panel with the unwashed area; the second evaluation is made by re-ranking th
38、e washed areas as above. BS EN 13523-29:2017EN 13523-29:2017 (E) 8 Dimensions in millimetres Key 1 direction of dirt/water 2 line for wash test 3, 4, 5 measuring points (triplicate reading) Figure 3 Dirt panel inspection 9 Test report The test report shall contain at least the following information:
39、 a) all details necessary to identify the product tested; b) a reference to this part of the EN 13523 series (EN 13523-29); c) all details necessary to identify the references; d) the geographical location of the rack; e) the test duration; f) the results of the test, as indicated in Clause 8; g) an
40、y deviation from the test procedure described; h) the date(s) of the test. BS EN 13523-29:2017EN 13523-29:2017 (E) 9 Bibliography 1 EN 1396, Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications 2 EN 10169, Continuously organic coated (coil coated) st
41、eel flat products Technical delivery conditions 3 EN 13523-2, Coil coated metals - Test methods - Part 2: Gloss 4 EN 13523-3, Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison This page deliberately left blankThis page deliberately left blankBSI is the national
42、body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring to
43、gether business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Orga
44、nizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services
45、 team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standar
46、ds Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such
47、 as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially ex
48、ploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal co
49、mpany use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any fo
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1