BS EN 13617-1-2012 Petrol filling stations Safety requirements for construction and performance of metering pumps dispensers and remote pumping units《加油站 计量泵 分油器和遥控油泵装置的建造和性能安全性要求》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13617-1:2012Petrol filling stationsPart 1: Safety requirements forconstruction and performance ofmetering pumps, dispensers andr e m o t e p u m p i n g u n i t sBS EN 1361

2、7-1:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13617-1:2012. It supersedes BS EN 13617-1:2004+A1:2009, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PVE/393/4, Metering pumps and dispensers for liquid f

3、uel.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Sta

4、ndards Limited 2012ISBN 978 0 580 71238 8 ICS 75.200 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2012.Amendments issued since publicationDate T e x t

5、 a f f e c t e dBS EN 13617-1:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13617-1 May 2012 ICS 75.200 Supersedes EN 13617-1:2004+A1:2009English Version Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping

6、 units Stations-service - Partie 1: Exigences relatives la construction et aux performances de scurit des distributeurs pompe immerge, distributeurs de carburants et units de pompage distance Tankstellen - Teil 1: Sicherheitstechnische Anforderungen an Bau- und Arbeitsweise von Zapfsulen, druckverso

7、rgten Zapfsulen und Fernpumpen This European Standard was approved by CEN on 13 April 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date

8、lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation un

9、der the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France

10、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMI

11、TEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13617-1:2012: EBS EN 13617-1:2012EN 13617-1:2012 (E) 2 Contents Page Foreword 4Introduction . 61 Scope 72 Norm

12、ative references 73 Terms and definitions . 84 List of significant hazards 125 Safety requirements and/or protective measures 135.1 Explosion protection measures . 135.2 Selection of equipment . 135.2.1 General 135.2.2 Pipe and hose permeability 145.2.3 Nozzle area vapour releases only . 155.2.4 Noz

13、zle boot area 175.3 Safety requirements, protective measures, construction and performance . 205.3.1 General requirements 205.3.2 Electrical apparatus . 225.3.3 Non-electrical apparatus . 245.3.4 Hydraulic apparatus 245.3.5 Vapour recovery system . 265.3.6 Housings . 265.3.7 Ventilation . 275.4 Safe

14、ty requirements related to electromagnetic phenomena . 286 Tests 286.1 Type tests . 286.1.1 General 286.1.2 Sight glass test 286.1.3 Pressure test for fuel containment systems . 286.1.4 Tests for electric cables 296.1.5 Stability test 336.1.6 Pressure test for vapour recovery systems 336.1.7 Materia

15、l assessment 336.1.8 Seal and gasket assessment 346.1.9 Electrical tests 346.2 Routine tests 356.2.1 Electrical tests 356.2.2 Hydraulic tests . 357 Information for use 367.1 General 367.2 Signals and warnings 367.3 Accompanying documents . 367.4 Marking . 37Annex A (normative) Classification of vapo

16、ur barriers . 38A.1 General 38A.2 Vapour barrier Type 1 38A.3 Vapour barrier Type 2 38A.4 Typical vapour barrier arrangements 39A.4.1 Horizontal vapour barrier Type 1 . 39A.4.2 Vertical vapour barrier Type 1 40A.4.3 Horizontal vapour barrier Type 2 . 41BS EN 13617-1:2012EN 13617-1:2012 (E) 3 A.4.4 V

17、ertical vapour barrier Type 2 42Annex B (informative) Information on explosion protected equipment 45Annex C (informative) Environmental aspects. 46Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 94/9/EC 48Annex ZB (informative) Relat

18、ionship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 50Bibliography 51BS EN 13617-1:2012EN 13617-1:2012 (E) 4 Foreword This document (EN 13617-1:2012) has been prepared by Technical Committee CEN/TC 393 “Equipment for storage tanks and for filling stations

19、”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Att

20、ention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13617-1:2004+A1:2009. In comparison with EN 13617-1:2004+A1:2

21、009, the following fundamental changes have been made: the normative references have been updated; in 6.1.4.2, the test method for cables includes those required for use with biodiesel has been revised; in 6.1.8.2, the test method for seals and gaskets includes those required for use with biofuels;

22、a new paragraph has been added in the scope: Fuels other than the ones of Explosion Group IIA are excluded from this European Standard; 7.2.1 has been added; the existing 7.2 has been made into 7.2.2; the informative Annex C concerning environmental aspects has been added. This document has been pre

23、pared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document. This European Standard Pet

24、rol filling stations consists of four parts: Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units; Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers; Part 3: Safety requi

25、rements for construction and performance of shear valves; Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers. The key purpose for the review of the standards was to consider biofuels. In practice, only EN 13617-1 was changed. According to

26、 the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech BS EN 13617-1:2012EN 13617-1:2012 (E) 5 Republic, Denmark, Estonia, Finland, France, Germany, Greec

27、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13617-1:2012EN 13617-1:2012 (E) 6 Introduction This document is a type C standard as stated

28、in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C

29、 standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of the type C standard. It has been assumed that the use of the equipment for dispensing of fuels will be by untrained persons (user/dispenser), while othe

30、r aspects of the operation, maintenance, etc., will be by designated and trained personnel (station personnel or operator). BS EN 13617-1:2012EN 13617-1:2012 (E) 7 1 Scope This European Standard applies to metering pumps, dispensers and remote pumping units to be installed at petrol filling stations

31、, designed to dispense liquid fuels into the tanks of motor vehicles, boats and light aircraft and into portable containers at flow rates up to 200 l min-1, and intended for use and storage at ambient temperatures between -20 C and +40 C. Measures in addition to those required by this European Stand

32、ard may be required for use and storage at temperature outside this range. The need for and nature of additional requirements should be determined by the manufacturer, if necessary after consulting the client. This European Standard deals with all significant hazards, hazardous situations and events

33、 relevant to metering pumps, dispensers and remote pumping units, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard gives health and safety related requirements for the selection, construction and performance of the equipme

34、nt. This European Standard does not deal with noise and with hazards related to transportation and installation. This European Standard does not include any requirements for metering performance. Vapour recovery efficiency rates are not considered within this European Standard. Fuels other than the

35、ones of Explosion Group IIA are excluded from this European Standard. This European Standard is not applicable to metering pumps, dispensers and remote pumping units which are manufactured before the date of publication of this document by CEN. This European Standard does not apply to equipment for

36、use with liquefied petroleum gas (LPG) or liquefied natural gas (LNG) or compressed natural gas (CNG). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition ci

37、ted applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 228, Automotive fuels Unleaded petrol Requirements and test methods EN 590, Automotive fuels Diesel Requirements and test methods EN 1360, Rubber and plastic hoses and hose assem

38、blies for measured fuel dispensing systems Specification EN 13012, Petrol filling stations Construction and performance of automatic nozzles for use on fuel dispensers EN 13463-1:2009, Non-electrical equipment for use in potentially explosive atmospheres Part 1: Basic method and requirements EN 1348

39、3, Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems Specification EN 13617-2, Petrol filling stations Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers EN 14125, Thermopl

40、astic and flexible metal pipework for underground installation at petrol filling stations EN 14214, Automotive fuels Fatty acid methyl esters (FAME) for diesel engines Requirements and test methods BS EN 13617-1:2012EN 13617-1:2012 (E) 8 CEN/TS 15293, Automotive fuels Ethanol (E85) automotive fuel R

41、equirements and test methods EN 60079-0, Explosive atmospheres Part 0: Equipment General requirements (IEC 60079-0) EN 60079-1:2007, Explosive atmospheres Part 1: Equipment protection by flameproof enclosures “d“ (IEC 60079-1:2007) EN 60079-7:2007, Explosive atmospheres Part 7: Equipment protection

42、by increased safety “e“ (IEC 60079-7:2006) EN 60079-10-1, Explosive atmospheres Part 10-1: Classification of areas Explosive gas atmospheres (IEC 60079-10-1) EN 60079-14, Explosive atmospheres Part 14: Electrical installations design, selection and erection (IEC 60079-14) EN 60204-1:2006, Safety of

43、machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 60730-2-10, Automatic electrical controls for household and similar use Part 2-10: Particular requirements for motor-st

44、arting relays (IEC 60730-2-10) EN 60947-3, Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3) EN 60950-1, Information technology equipment Safety Part 1: General requirements (IEC 60950-1) EN ISO 1182, Reaction to fir

45、e tests for products Non-combustibility test (ISO 1182) EN ISO 1825, Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification (ISO 1825) EN ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12100:2010) EN ISO 1

46、3849-1, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1) EN ISO 16852, Flame arresters Performance requirements, test methods and limits for use (ISO 16852) ISO 11925-3, Reaction to fire tests Ignitability of building products subjected

47、to direct impingement of flame Part 3: Multi-source test HD 21.13 S1, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 13: Oil resistant PVC sheathed cables with two or more conductors HD 22.4 S3, Cables of rated voltages up to and including 450/750 V and havi

48、ng cross-linked insulation Part 4: Cords and flexible cables 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100:2010 and the following apply. 3.1 air and/or vapour separator device used for continuously separating and removing air or gases contained in the liquid BS EN 13617-1:2012EN 13617-1:2012 (E) 9 3.2 delivery hose assembly flexible delivery system to which the nozzle is connected 3.3 column extension fabrication extending upwards from a metering pump/dispenser hydraulic housing 3.4 metering pump measuri