1、BRITISH STANDARD BS EN 13879:2002 Wood-based panels Determination of edgewise bending properties The European Standard EN 13879:2002 has the status of a British Standard ICS 79.060.01 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 13879:2002 This British Standard, having
2、 been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 2 July 2002 BSI 2 July 2002 ISBN 0 580 39977 X National foreword This British Standard is the official En
3、glish language version of EN 13879:2002. The UK participation in its preparation was entrusted to Technical Committee B/541, Wood-based panels, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The Bri
4、tish Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards On
5、line. This publication does not purport to include all the necessary provisions of a contract. Users of this publication are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text;
6、present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover,
7、 an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN13879 May2002 ICS79.060.
8、01 Englishversion WoodbasedpanelsDeterminationofedgewisebending properties PanneauxbasedeboisDterminationdespropritsde flexionsurchant HolzwerkstoffeBestimmungderEigenschaftenbei Hochkantbiegung ThisEuropeanStandardwasapprovedbyCENon14March2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRe
9、gulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialvers
10、ions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,
11、Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandb
12、yanymeansreserved worldwideforCENnationalMembers. Ref.No.EN13879:2002EEN13879:2002(E) 2 Contents page Foreword3 1 Scope 4 2 Normativereferences 4 3 Principle4 4 Testpieces. .4 5 Conditioning.8 6 Procedure .8 7 Expressionofresults . .8 8 Testreport . .9EN13879:2002(E) 3 Foreword Thisdocument(EN13879:
13、2002)hasbeenpreparedbyTechnicalCommitteeCEN/TC112,“Woodbasedpanels“, thesecretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyNovember2002,andconflictingnationalstandardsshallbewithdrawnatthelates
14、t byNovember2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spai
15、n, Sweden,SwitzerlandandtheUnitedKingdom.EN13879:2002(E) 4 1Scope ThisEuropeanStandardspecifiesamethodforthedeterminationofstrength,stiffness,creepanddurationofload whenwoodbasedpanelsareloadedinedgewisebending. Itisnotapplicabletoextrudedpanels. 2 Normativereferences ThisEuropeanStandardincorporate
16、s,bydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendme
17、ntorrevision.Forundatedreferences,thelatesteditionofthe publicationreferredtoapplies(includingamendments). EN310, WoodbasedpanelsDeterminationofmodulusofelasticityinbendingandofbendingstrength. EN789, TimberstructuresTestmethodsDeterminationofmechanicalpropertiesofwoodbasedpanels. ENV1156, Woodbased
18、panelsDeterminationofdurationofloadandcreepfactors. 3Principle Thebendingpropertiesaredeterminedontestpiecespreparedfrompanelstrips,facewisefixedtogetherforminga testpiecewhichcanbetestedaccordingtooneofthethreetestmethodsforflatwisebendingdescribedinthe followingstandardsEN310,EN789,ENV1156. 4 Test
19、pieces 4.1 Numberoftestpieces 4.1.1General Eachtestpieceshallcontainstripsfromonlyonepanelandonepaneldirection. 4.1.2 NumberofstripspertestpieceandtestpiecesperpanelforEN310sizetestpieces Foreachdirectiontobetested,thenumberoftestpiecesisgiveninTable1.EN13879:2002(E) 5 Table1Numberofstripspertestpie
20、ceandtestpiecesper panelforEN310sizetestpieces Thicknessofpanel mm Numberofstrips pertestpiece Numberoftestpieces perdirectionand paneltobetested 3 16 3 4 12 3 5 10 3 6 8 3 7 7 3 8 6 3 9 5 3 10 5 3 12 4 4 14 3 5 16 3 5 18 2 6 20 2 6 25 2 6 25 1 6 4.1.3 Numberofstripspertestpieceandtestpiecesperpanel
21、forEN789sizetestpieces Foreachdirectiontobetested,thenumberoftestpiecesisgiveninTable2. Table2Numberofstripspertestpieceandtestpiecesper panelforEN789sizetestpieces Thicknessofpanel mm Numberofstrips pertestpiece Numberoftestpieces perdirectionandpanel tobetested 3 100 1 4 75 1 5 60 1 6 50 1 7 43 1
22、8 38 1 9 33 1 10 30 1 12 25 1 14 22 1 16 19 1 18 17 1 20 15 1 30 10 1EN13879:2002(E) 6 4.1.4 NumberofstripspertestpieceandtestpiecesperpanelforENV1 156sizetestpieces Foreachdirectiontobetested,thenumberoftestpiecesisgiveninTable3. Table3Numberofstripspertestpieceandtestpiecesper panelforENV1156sizet
23、estpieces Thicknessofpanel mm Numberofstrips pertestpiece Numberoftestpieces perdirectionandpanel tobetested 31 63 41 23 51 03 685 775 865 955 10 5 5 12 4 6 14 3 8 16 3 8 18 2 10 20 2 10 25 2 10 25 1 10 4.2 Preparationoftestpieces 4.2.1 Adhesivesandfasteners Usealowmodulusglue,anadhesivefilmoramecha
24、nicalfastenerwhichwillnotincreasethestiffnessand strengthofthetestpiece.Applytheadhesiveorfastenertothetestpieceattheloadingpoint(s)andatthe supports. 4.2.2 Smallsizetestpieces(seeEN310) Preparestripswithalengthof560mmandawidth( )ofaleast30mm.Fixthestripstogetherfacetobackto makeatestpiecewiththedim
25、ensions560mm (ca.50)mm mm.Cutthetestpiecetoalengthof550mm andathicknessof25mm.Thewidthofthetestpieceisdependentonthethicknessofthestrips(seeFigure1). Testpieceswithlesshomogeneousmaterial(e.g.plywood,LVL,OSBandsolidwoodpanels)andathickness morethan16mmshallbetestedwithaheightof50mm.Thetestpiecesizes
26、hallthenbechangedinaccordance withthetestmethod(seeEN310).EN13879:2002(E) 7 Dimensionsinmillimetres Figure1Smallsizetestpieceforedgewisebending 4.2.3 Mediumsizetestpieces(seeEN789) Preparestripswithalengthof1200mmandawidth( )of30mm.Fixthestripstogetherfacetobacktomakea testpiecewiththedimensions1200
27、mm (ca.300)mm mm.Cutthetestpiecetoalengthof1150mmanda thicknessof25mm.Thewidthofthetestpieceisdependentonthethicknessofthestrips(seeFigure2). Dimensionsinmillimetres Figure2Mediumsizetestpieceforedgewisebending 4.2.4 Testpiecesfordurationofloadandcreeptest(seeENV1156) Preparestripswithalengthof500mm
28、andawidth( )of30mm.Fixthestripstogetherfacetobacktomakeatest piecewiththedimensions500 (ca.50) mm.Cutthetestpiecetoalengthof460mmandathicknessof 25mm.Thewidthofthetestpieceisdependentonthethicknessofthestrips(seeFigure3).Testpieceswithless homogeneousmaterial(e.g.plywood,LVL,OSBandsolidwoodpanels)an
29、dathicknessmorethan16mmshallbe testedwithaheightof50mm.Thetestpiecesizeshallthenbechangedinaccordancewiththetestmethod(see ENV1156).EN13879:2002(E) 8 Dimensionsinmillimetres Figure3Testpiecesfordurationofloadandcreeptestforedgewisebending 5Conditioning Beforetesting,thetestpiecesshallbeconditionedto
30、constantmassinaccordancewiththerelevantteststandard EN310,EN789,ENV1156. 6Procedure 6.1 Smallsizetestpieces CarryoutthetestinaccordancewithEN310. 6.2 Mediumsizetestpieces CarryoutthetestinaccordancewithEN789. 6.3 Testpiecesfordurationofloadandcreeptest CarryoutthetestinaccordancewithENV 1156. 7 Expr
31、essionofresults 7.1 Smallsizetestpieces ExpressresultsinaccordancewithEN310. 7.2 Mediumsizetestpieces ExpressresultsinaccordancewithEN789. 7.3 Testpiecesfordurationofloadandcreeptest ExpressresultsinaccordancewithENV1156.EN13879:2002(E) 9 8 Testreport AccordingtotherelevantteststandardEN310,EN789,EN
32、V1156.BS EN 13879:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revi
33、sions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or am
34、biguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures t
35、hat subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available
36、from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on nation
37、al, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996
38、7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email
39、: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright,
40、in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise wit
41、hout prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1